WTB Choke knob and bezel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68haywagon · 08-29-2005, 11:22 AM

I just got the correct choke cable from Matt67C10 this weekend and now I need the bezel and knob for the dash. Anyone have a set laying around? It doesn't have to be perfect, as my truck is far from it. Shipping to 18706.

Thanks
Mike

RicksTrucks · 08-29-2005, 12:08 PM

What year bezel (for your 68?) and how many guages do you need?

68haywagon · 08-29-2005, 12:27 PM

For my 68. I need the little silver round bezel (I don't know if that is what it is called) that screws onto the cable before the knob. I have the dummy light setup if that makes a difference.

Mike

RicksTrucks · 08-29-2005, 12:29 PM

Some refer to the whole dash cluster as a bezel, is the reason I was asking. Just wanted to clarify for everyone.

68haywagon · 08-29-2005, 12:32 PM

Gotcha. Thanks, I didn't know what to call it

.

Mike

RicksTrucks · 08-29-2005, 01:58 PM

Is this part of what you are looking for?

68haywagon · 08-29-2005, 04:34 PM

That's the one! I also need the handle/knob too.

Thanks,
Mike

RicksTrucks · 08-29-2005, 05:21 PM

That is all I think that I have. Let me know if you get everything but that.

**67sss** · 08-29-2005, 08:18 PM

so now you need just the knob, right? does it look like either of the knobs on these light switches ? I also have one from a 67, but those knobs are different..

68haywagon · 08-29-2005, 09:51 PM

I still need both. I have no clue what the knob looks like. I just looked in my LMC catalog and it lists different part numbers for the different knobs(wiper, headlights, and choke), so I don't know if they are interchangable. I just don't want to pay $20+ for a new one when it's not going to be in there that long. The POS cable the PO put in just sucks and Matt gave me the correct cable, but he didn't have the knob or bezel for it.

Thanks,
Mike

**67sss** · 08-29-2005, 10:04 PM

here's a close up of 2 style knobs, you'll want the one on the right and the spacer.
$10 for spacer and knob. pm me and I'll send you my addyif you want em. thanks

RicksTrucks · 08-29-2005, 11:20 PM

I can take a picture of my 68, if you want, tomorrow morning.

Rod · 08-30-2005, 09:12 AM

You have to specfically get choke knob..they're different in that their threaded onto the cable end. Something like that anyway.. I dont have one here to look at right now. Maybe a manual throttle knob might work. How deep some of the knobs are also is a factor.

**67sss** · 08-30-2005, 05:17 PM

here's one on a 67', I think it's the type that threads on, RIGHT?

TruckinDaddy · 08-30-2005, 07:24 PM

I'd bet so. The threaded one is on my 68. Now if I can just find the right cable...

**67sss** · 08-30-2005, 07:32 PM

Quote:

Originally Posted by TruckinDaddy

I'd bet so. The threaded one is on my 68. Now if I can just find the right cable...

what cable do you need? the cable is still connected on the above pic...

TruckinDaddy · 08-30-2005, 07:37 PM

Sorry for the hijack... I had to rig up a POS universal choke cable, when mine broke last month. I thought I found one on the forum, but it never arrived. So I am looking for a useable correct choke cable for a 2bbl, if that matters. But I haven't felt like paying the $6 shipping out of a catalog for a $10 cable.

68haywagon · 08-30-2005, 11:31 PM

The one on that 67 is in the same position as where mine is supposed to be, and the I just looked at the cable and it does have threads so I guess it does screw on.

Mike

55454 · 08-31-2005, 10:34 AM

I have the complete set up with deluxe knob. VGC $20 pm e-mail and I will send pics. First come first served. Or I can send it if you dont want it send it back.

Tommy

08-29-2005, 11:22 AM	#1
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	WTB Choke knob and bezel I just got the correct choke cable from Matt67C10 this weekend and now I need the bezel and knob for the dash. Anyone have a set laying around? It doesn't have to be perfect, as my truck is far from it. Shipping to 18706. Thanks Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

08-29-2005, 12:08 PM	#2
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	What year bezel (for your 68?) and how many guages do you need? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

08-29-2005, 12:27 PM	#3
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	For my 68. I need the little silver round bezel (I don't know if that is what it is called) that screws onto the cable before the knob. I have the dummy light setup if that makes a difference. Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

08-29-2005, 12:29 PM	#4
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Some refer to the whole dash cluster as a bezel, is the reason I was asking. Just wanted to clarify for everyone. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

08-29-2005, 12:32 PM	#5
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	Gotcha. Thanks, I didn't know what to call it . Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

08-29-2005, 01:58 PM	#6
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Choke part Is this part of what you are looking for? Attached Images __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

08-29-2005, 04:34 PM	#7
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	That's the one! I also need the handle/knob too. Thanks, Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

08-29-2005, 05:21 PM	#8
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	That is all I think that I have. Let me know if you get everything but that. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

08-29-2005, 08:18 PM	#9
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,324	choke so now you need just the knob, right? does it look like either of the knobs on these light switches ? I also have one from a 67, but those knobs are different.. Attached Images

08-29-2005, 09:51 PM	#10
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	I still need both. I have no clue what the knob looks like. I just looked in my LMC catalog and it lists different part numbers for the different knobs(wiper, headlights, and choke), so I don't know if they are interchangable. I just don't want to pay $20+ for a new one when it's not going to be in there that long. The POS cable the PO put in just sucks and Matt gave me the correct cable, but he didn't have the knob or bezel for it. Thanks, Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

08-29-2005, 10:04 PM	#11
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,324	both here's a close up of 2 style knobs, you'll want the one on the right and the spacer. $10 for spacer and knob. pm me and I'll send you my addyif you want em. thanks Attached Images

08-29-2005, 11:20 PM	#12
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	I can take a picture of my 68, if you want, tomorrow morning. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

08-30-2005, 09:12 AM	#13
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	You have to specfically get choke knob..they're different in that their threaded onto the cable end. Something like that anyway.. I dont have one here to look at right now. Maybe a manual throttle knob might work. How deep some of the knobs are also is a factor. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

08-30-2005, 05:17 PM	#14
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,324	67 choke here's one on a 67', I think it's the type that threads on, RIGHT? Attached Images

08-30-2005, 07:24 PM	#15
TruckinDaddy What's that funky smell? Join Date: Mar 2005 Location: Austin, TX Posts: 610	I'd bet so. The threaded one is on my 68. Now if I can just find the right cable... __________________ Mike S 68 C10 Long Step (Pretending to be a Long Fleetside) Grandpa's Farm Truck 3 on the tree, 307, No power brakes or steering Factory Options - HD rear spring and Ammeter/Oil Gauges My truck blog My Car Domain page



Register or Log In To remove these advertisements.

08-30-2005, 07:37 PM	#17
TruckinDaddy What's that funky smell? Join Date: Mar 2005 Location: Austin, TX Posts: 610	Sorry for the hijack... I had to rig up a POS universal choke cable, when mine broke last month. I thought I found one on the forum, but it never arrived. So I am looking for a useable correct choke cable for a 2bbl, if that matters. But I haven't felt like paying the $6 shipping out of a catalog for a $10 cable. __________________ Mike S 68 C10 Long Step (Pretending to be a Long Fleetside) Grandpa's Farm Truck 3 on the tree, 307, No power brakes or steering Factory Options - HD rear spring and Ammeter/Oil Gauges My truck blog My Car Domain page

08-30-2005, 11:31 PM	#18
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	The one on that 67 is in the same position as where mine is supposed to be, and the I just looked at the cable and it does have threads so I guess it does screw on. Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

08-31-2005, 10:34 AM	#19
55454 55454 Join Date: Mar 2005 Location: Lafayette La. Posts: 340	I have the complete set up with deluxe knob. VGC $20 pm e-mail and I will send pics. First come first served. Or I can send it if you dont want it send it back. Tommy __________________ 72 Cheyenne 1956 3100 1955 210 19 year old Chihuahua (Factory Teeth)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.