Harmonic Balancer Torque Setting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**68350** · 08-29-2005, 10:23 PM

What is the torque setting for the harmonic balancer on a 350? Book says 60 ft-lbs., but that seems low. Thanks for any help

kaycee · 08-29-2005, 10:54 PM

Sounds good to me my 327 doesn't even have one,not even drilled for one

*wolfthing2000* · 08-29-2005, 11:00 PM

Don't forget, the balancer is keyed and the hub should be a tight fit. I can't remember , but the bolt is only about 7/16 isn't it.???

Longhorn Man · 08-29-2005, 11:54 PM

60 is plenty. The bolt doesn't hold it on, the bolt just presses it onto the crank snout.

Fred T · 08-30-2005, 02:02 AM

Torque range for 7/16-20 is 50-70 ft-lb. That is with motor oil as lube. I would use Loc-tite and torque to 60 ft-lb.

08-29-2005, 10:23 PM	#1
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Harmonic Balancer Torque Setting What is the torque setting for the harmonic balancer on a 350? Book says 60 ft-lbs., but that seems low. Thanks for any help __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

08-29-2005, 10:54 PM	#2
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,446	Sounds good to me my 327 doesn't even have one,not even drilled for one __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327

08-30-2005, 02:02 AM	#5
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Torque range for 7/16-20 is 50-70 ft-lb. That is with motor oil as lube. I would use Loc-tite and torque to 60 ft-lb. __________________ Fred There is no such thing as too much cam...just not enough engine.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-29-2005, 11:00 PM	#3
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Don't forget, the balancer is keyed and the hub should be a tight fit. I can't remember , but the bolt is only about 7/16 isn't it.???

08-29-2005, 11:54 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	60 is plenty. The bolt doesn't hold it on, the bolt just presses it onto the crank snout.



Register or Log In To remove these advertisements.