08-31-2005, 08:24 PM | #1 |
Senior Member
Join Date: May 2004
Location: Seaside, Oregon
Posts: 1,789
|
Need a rear end!!
I pulled the diff cover off of my '71 shortbox and found that one of the spider gears had three chipped teeth on it. I had someone else look at it and I'm being told that the whole thing is shot
The ring and pinion are both worn and there is over 1/8 inch of play at my axles/bearings. He is also telling me that it was originally a posi but that it's so hammered that the posi is no longer working. I got an estimate of $1300 to rebuild everything and put in an Eaton posi unit. That's a bit much for me right now so I'm hoping to find a used local one. I am looking for a '71-'72 rear end (complete), preferably a 12-bolt and preferably local to Portland Oregon. Oh, I would like a posi if I can get one. Let's see what's out there.....
__________________
-Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4 |
09-01-2005, 02:15 PM | #2 |
Senior Member
Join Date: May 2004
Location: Seaside, Oregon
Posts: 1,789
|
ttt
__________________
-Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|