one piece front end - The 1947 - Present Chevrolet & GMC Truck Message Board Network

countryboyz71 · 09-10-2005, 05:49 PM

im looking for websites or anything to help with me locateing a one piece fiberglass front end for my 68 swb truck any help is greatly appreciated

LUV2XCLR8 · 09-10-2005, 06:07 PM

http://www.usbody.com/WhereQualityComesFirst.htm

countryboyz71 · 09-10-2005, 06:16 PM

thank you

countryboyz71 · 09-19-2005, 09:55 PM

anyone else know any other sites?

djracer · 09-19-2005, 11:28 PM

street or race application?

sneakysnake · 09-20-2005, 10:13 AM

http://www.vfnfiberglass.com/site.htm

FirstGen · 09-20-2005, 10:32 AM

anyone weighed a stock front clip and figured the weight savings going to fiberglass?
Be interesting to know...

djracer · 09-20-2005, 01:19 PM

vfn only has hoods for our trucks! That's who made my camaro stuff!

countryboyz71 · 09-24-2005, 06:40 PM

im building a street truck

djracer · 09-24-2005, 07:35 PM

you don't want the stuff from creative glassworks in TN their stuff is race weight (very Thin)

cdowns · 09-24-2005, 08:34 PM

hope you have extensive fabrication skills because you'll need them to get a flip front fiberglass to hold up to street use and look good too

not for a novice!!!!

countryboyz71 · 09-25-2005, 12:19 AM

i found a site that had the one piece kits for under a 1000 but cant find it now

68LSS1 · 09-25-2005, 06:27 AM

I've got the US Body and am very happy with it. Like has been stated before, where ever you get it from, it's going to take a lot of work to get them fitted and prepped for paint.

09-10-2005, 05:49 PM	#1
countryboyz71 Registered User Join Date: Aug 2005 Location: doniphan, missouri Posts: 44	one piece front end im looking for websites or anything to help with me locateing a one piece fiberglass front end for my 68 swb truck any help is greatly appreciated

09-10-2005, 06:07 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	http://www.usbody.com/WhereQualityComesFirst.htm __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-19-2005, 11:28 PM	#5
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	street or race application? __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-20-2005, 10:32 AM	#7
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	anyone weighed a stock front clip and figured the weight savings going to fiberglass? Be interesting to know... __________________ 1968 C10 build in process TT LSA/6L90e/9"

09-20-2005, 01:19 PM	#8
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	vfn only has hoods for our trucks! That's who made my camaro stuff! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-10-2005, 06:16 PM	#3
countryboyz71 Registered User Join Date: Aug 2005 Location: doniphan, missouri Posts: 44	thank you

09-19-2005, 09:55 PM	#4
countryboyz71 Registered User Join Date: Aug 2005 Location: doniphan, missouri Posts: 44	anyone else know any other sites?

09-20-2005, 10:13 AM	#6
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	http://www.vfnfiberglass.com/site.htm

09-24-2005, 06:40 PM	#9
countryboyz71 Registered User Join Date: Aug 2005 Location: doniphan, missouri Posts: 44	im building a street truck

09-24-2005, 07:35 PM	#10
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	you don't want the stuff from creative glassworks in TN their stuff is race weight (very Thin) __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-24-2005, 08:34 PM	#11
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	hope you have extensive fabrication skills because you'll need them to get a flip front fiberglass to hold up to street use and look good too not for a novice!!!! __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

09-25-2005, 12:19 AM	#12
countryboyz71 Registered User Join Date: Aug 2005 Location: doniphan, missouri Posts: 44	i found a site that had the one piece kits for under a 1000 but cant find it now

09-25-2005, 06:27 AM	#13
68LSS1 Registered User Join Date: Dec 2002 Location: Tampa Posts: 1,191	I've got the US Body and am very happy with it. Like has been stated before, where ever you get it from, it's going to take a lot of work to get them fitted and prepped for paint. __________________ '68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.