Is the woodgrain the same? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Low69CST · 07-02-2002, 03:05 PM

My dad bought a woodgrain dash bezel and glove box piece for his 72 Cheyenne Super. 10 years later his Cheyenne interior is still unfinished and I need one for my 69 CST. Are these pieces the same? The glove box has 3 holes for the Cheyenne Super emblem. Is this the same for a CST emblem?

johnnyp · 07-02-2002, 04:59 PM

Quote:

My dad bought a woodgrain dash bezel and glove box piece for his 72 Cheyenne Super. 10 years later his Cheyenne interior is still unfinished and I need one for my 69 CST. Are these pieces the same? The glove box has 3 holes for the Cheyenne Super emblem. Is this the same for a CST emblem?

As for as the instrument bezel - any year will work. But I'm not sure what you're asking about the glovebox. Do you want to install the woodgrain glovebox trim plate on you're 69 with a CST emblem? I don't know if the emblems have the same stud patterns (woodgrain didn't happen until 71). But the emblems are about the same size, so you could drill new holes to match the CST emblem and it should hide the old holes, or you could cut the studs off and glue the emblem to the trim plate, using double-sided tape.

Low69CST · 07-03-2002, 09:59 AM

So your saying that a dash and a glove box door on a 69 CST should have no wood grain on it?

I'm sort of brain dead this summer,

Does anybody have a pic I could look at of a factory CST interior

johnnyp · 07-03-2002, 10:26 AM

Low69, what I meant to say was, Cheyenne didn't come out until 71. I'm not sure if woodgrain was available on the CST or not. I know that woodgrain lower body trim was available on CST in 69, I'm just not sure about the interior. Anybody know for sure?

**Classic Heartbeat** · 07-03-2002, 11:00 AM

I have never seen a pre 71 truck with a woodgrain instrument bezel or glove box lid, CST or otherwise. I don't think that it became an option untill 71... WES www.ClassicHeartbeat.com

johnnyp · 07-03-2002, 11:43 AM

That's what I was thinking Wes, that the woodgrain interior didn't become available until the Cheyenne model in 71. But I wasn't positive - everytime I think something is a "sure thing" with the 67-72 models, somebody comes up with an exception.

Low69CST · 07-03-2002, 11:47 AM

A friend of mine knows where an original 69 CST is sitting in a warehouse, i've asked him 10 times to take me with him when he go looks at it to buy it, but still haven't heard anything. I could take 20 pages of notes lookin at that truck.

Longhorn Man · 07-03-2002, 05:45 PM

You guys are right..not till 71.

07-02-2002, 03:05 PM	#1
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	Is the woodgrain the same? My dad bought a woodgrain dash bezel and glove box piece for his 72 Cheyenne Super. 10 years later his Cheyenne interior is still unfinished and I need one for my 69 CST. Are these pieces the same? The glove box has 3 holes for the Cheyenne Super emblem. Is this the same for a CST emblem? __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks

07-03-2002, 09:59 AM	#3
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	So your saying that a dash and a glove box door on a 69 CST should have no wood grain on it? I'm sort of brain dead this summer, Does anybody have a pic I could look at of a factory CST interior __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks

07-03-2002, 10:26 AM	#4
johnnyp Keepin' It Stock Join Date: Aug 2001 Location: Grand Island, Nebraska, USA Posts: 554	Low69, what I meant to say was, Cheyenne didn't come out until 71. I'm not sure if woodgrain was available on the CST or not. I know that woodgrain lower body trim was available on CST in 69, I'm just not sure about the interior. Anybody know for sure? __________________ 72 Sierra Grande - Maych Forget about "do it right the first time". Do it wrong the first time to learn how, then do it right the second time.

07-03-2002, 11:00 AM	#5
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	I have never seen a pre 71 truck with a woodgrain instrument bezel or glove box lid, CST or otherwise. I don't think that it became an option untill 71... WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

07-03-2002, 11:43 AM	#6
johnnyp Keepin' It Stock Join Date: Aug 2001 Location: Grand Island, Nebraska, USA Posts: 554	That's what I was thinking Wes, that the woodgrain interior didn't become available until the Cheyenne model in 71. But I wasn't positive - everytime I think something is a "sure thing" with the 67-72 models, somebody comes up with an exception. __________________ 72 Sierra Grande - Maych Forget about "do it right the first time". Do it wrong the first time to learn how, then do it right the second time.

07-03-2002, 11:47 AM	#7
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	A friend of mine knows where an original 69 CST is sitting in a warehouse, i've asked him 10 times to take me with him when he go looks at it to buy it, but still haven't heard anything. I could take 20 pages of notes lookin at that truck. __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks

07-03-2002, 05:45 PM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	You guys are right..not till 71.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.