70-72 5 bolt in a 60-66 coil chassis????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rooster's 67 · 09-16-2005, 03:32 AM

will a 70-72 5 bolt coil rear bolt into the 60-66 coil chassis?

if so,,,,,, anybody got a 5 bolt 3.08 rear for sale?
PM me with your parts if you got 'em
I wan'a buy
_

Burnsman · 09-16-2005, 07:21 AM

I think it will physically bolt in, but it is slightly wider. Brian

shaneschevys · 09-16-2005, 12:01 PM

The 71&72 were the only trucks that were 5 lug. The rear end will bolt up to the 63-66 frame. You will have to change the bracket that the panhard bar bolts to. We had to do that to my wifes 64. The 71,72 rear end is slightly wider than the 63-70 rear end.

**uncle** · 09-16-2005, 04:31 PM

Don't change the bracket, just use the panhard bar from the 72.

Tx Firefighter · 09-17-2005, 02:45 PM

You HAVE to change the panhard bracket on 64 and earlier trucks. I learned all about it on my 64.

The later 65 and up frame bracket bolts on though.

**uncle** · 09-17-2005, 03:09 PM

Sorry! I didn't look at the year close enough. Those late and early year built trucks can really mess you up also.

09-16-2005, 03:32 AM	#1
Rooster's 67 Registered User Join Date: Sep 2003 Location: DFW Posts: 765	70-72 5 bolt in a 60-66 coil chassis????? will a 70-72 5 bolt coil rear bolt into the 60-66 coil chassis? if so,,,,,, anybody got a 5 bolt 3.08 rear for sale? PM me with your parts if you got 'em I wan'a buy _ __________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?

09-16-2005, 07:21 AM	#2
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	rear I think it will physically bolt in, but it is slightly wider. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

09-16-2005, 12:01 PM	#3
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	The 71&72 were the only trucks that were 5 lug. The rear end will bolt up to the 63-66 frame. You will have to change the bracket that the panhard bar bolts to. We had to do that to my wifes 64. The 71,72 rear end is slightly wider than the 63-70 rear end. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

09-16-2005, 04:31 PM	#4
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Rear Don't change the bracket, just use the panhard bar from the 72.

09-17-2005, 02:45 PM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	You HAVE to change the panhard bracket on 64 and earlier trucks. I learned all about it on my 64. The later 65 and up frame bracket bolts on though. __________________ I'm on the Instagram- @Gearhead_Kevin

09-17-2005, 03:09 PM	#6
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Bf Sorry! I didn't look at the year close enough. Those late and early year built trucks can really mess you up also.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.