One Piece Window Kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 09-24-2005, 03:37 PM

Where can I get one of these kits. I can't seem to find one on the board or anywherelse online.

sdkid · 09-24-2005, 03:48 PM

There was one for sale a couple weeks ago on here. Hilljob was the name I think.

**hilljob26** · 09-24-2005, 04:11 PM

you can go to early classics,brothers,i think wes has some,there are several vendors that carry these

71swb4x4 · 09-24-2005, 04:14 PM

This is the best price I have seen:
http://www.mothertruckers.net/catalo...c850c854e9d8fb

Mothertruckers for $325

NORCAL_GUY73 · 09-25-2005, 09:37 PM

I believe I got a flyer from brothers last week and they are on sale for 299.00 I tossed the flyer so I couldnt double check.

5150 · 09-25-2005, 10:14 PM

The kits are still manual windows, CORRECT?

**hilljob26** · 09-25-2005, 10:35 PM

you can use them manually or power,both regulators are the same,only you have the optioon of power or manual

5150 · 09-25-2005, 10:48 PM

So what's it take to make them power. I'm going between getting a kit or just getting a power window kit and keeping the vent windows.

**Tim Christian** · 09-26-2005, 07:49 AM

I have a complete used kit that a customer took out of a truck. $225.00 + ship

UP GRADE · 09-26-2005, 09:15 AM

put me second in line if yellow69 dosen't take it.

5150 · 09-26-2005, 10:21 AM

Tim,

Go ahead if UP GRADE wants it. I'll pass for now.

UP GRADE · 09-26-2005, 11:18 AM

thanks yellow69. tim let me know much is shipping to 38118. up grade

matthufham · 09-26-2005, 05:05 PM

does it matter if you have 72 doors, or is the fit the same?

**Tim Christian** · 09-26-2005, 10:00 PM

Hey UP GRADE, Please e-mail me your shipping address to christiansclassics@msn.com and I will get you a shipping quote. Thanks Tim

**hilljob26** · 09-27-2005, 07:07 AM

it doesn't matter what door,they fit them all,if you want power,you just have to buy a power regulator,the ones that i have bolt right in like the factory regulator

LUV2XCLR8 · 09-27-2005, 06:32 PM

I have always wondered about putting these on a Blazer

**hilljob26** · 09-27-2005, 06:54 PM

i dont think they would work all that geat on a blazer w/ no back support for the glass,that is alot of glass that would flex and such as you close the door

Pop's72 · 09-27-2005, 07:50 PM

I read an article on one piece window kits on a blazer and what hilljob said is correct. Basically you want to have them all the way up or all the down, anywhere in between and they rattled around way to much (according to the installer).

I'll see if I can find the article.

**Tim Christian** · 09-28-2005, 09:52 PM

Hey Up Grade, if you want them call me I have people wanting to buy them now. Thanks Tim

UP GRADE · 09-29-2005, 08:57 AM

sent you a e mail and a pm

09-24-2005, 03:37 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	One Piece Window Kit Where can I get one of these kits. I can't seem to find one on the board or anywherelse online. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-24-2005, 03:48 PM	#2
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	There was one for sale a couple weeks ago on here. Hilljob was the name I think. __________________ I think the world needs a drink... Help somebody...If you can....VanZant We're not wrong, we're not sorry, and its probably gonna happen again. That's the truth about men. Tracy Byrd Member# 13924 '70 c10, 350/350 '68 c10 250/4spd '68 c10 no eng/trans fac ps/pb/ac/at (future father/sons project) '48 Chevy Loadmaster

09-24-2005, 04:11 PM	#3
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	you can go to early classics,brothers,i think wes has some,there are several vendors that carry these __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

09-24-2005, 04:14 PM	#4
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	This is the best price I have seen: http://www.mothertruckers.net/catalo...c850c854e9d8fb Mothertruckers for $325 __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

09-25-2005, 10:14 PM	#6
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	The kits are still manual windows, CORRECT? __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-25-2005, 09:37 PM	#5
NORCAL_GUY73 Registered User Join Date: Mar 2003 Location: Ukiah, California Posts: 121	I believe I got a flyer from brothers last week and they are on sale for 299.00 I tossed the flyer so I couldnt double check.

09-25-2005, 10:35 PM	#7
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	you can use them manually or power,both regulators are the same,only you have the optioon of power or manual __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

09-25-2005, 10:48 PM	#8
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	So what's it take to make them power. I'm going between getting a kit or just getting a power window kit and keeping the vent windows. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-26-2005, 07:49 AM	#9
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	I have a complete used kit that a customer took out of a truck. $225.00 + ship

09-26-2005, 09:15 AM	#10
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	put me second in line if yellow69 dosen't take it.

09-26-2005, 10:21 AM	#11
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Tim, Go ahead if UP GRADE wants it. I'll pass for now. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-26-2005, 11:18 AM	#12
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	thanks yellow69. tim let me know much is shipping to 38118. up grade

09-26-2005, 05:05 PM	#13
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	does it matter if you have 72 doors, or is the fit the same?

09-26-2005, 10:00 PM	#14
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Hey UP GRADE, Please e-mail me your shipping address to christiansclassics@msn.com and I will get you a shipping quote. Thanks Tim

09-27-2005, 07:07 AM	#15
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	it doesn't matter what door,they fit them all,if you want power,you just have to buy a power regulator,the ones that i have bolt right in like the factory regulator __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343



Register or Log In To remove these advertisements.

09-27-2005, 06:32 PM	#16
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	I have always wondered about putting these on a Blazer __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-27-2005, 06:54 PM	#17
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	i dont think they would work all that geat on a blazer w/ no back support for the glass,that is alot of glass that would flex and such as you close the door __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

09-27-2005, 07:50 PM	#18
Pop's72 It's ok to stare... Join Date: Dec 2004 Location: San Jose, CA Posts: 667	I read an article on one piece window kits on a blazer and what hilljob said is correct. Basically you want to have them all the way up or all the down, anywhere in between and they rattled around way to much (according to the installer). I'll see if I can find the article.

09-28-2005, 09:52 PM	#19
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Hey Up Grade, if you want them call me I have people wanting to buy them now. Thanks Tim

09-29-2005, 08:57 AM	#20
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	sent you a e mail and a pm Last edited by UP GRADE; 09-29-2005 at 03:39 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.