Followup wheel question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tim240Z · 10-05-2005, 03:00 PM

Followup to this thread: http://67-72chevytrucks.com/vboard/s....php3?t=175306

Will this rim work on a 71 C20 Fleet?
http://store.summitracing.com/defaul...=egnsearch.asp

Rim Diameter (in): 17
Rim Width (in): 8.00
Backspacing (in): 4.50
Beadlock Functional: No
Beadlock Included: No
Rim Material: Steel
Center Material: Steel
Wheel Finish: Chrome
Lug Nut Seat Style: Conical seat
Wheel Construction: 2-piece
Conical Seat Taper: 60 degree
Hub Centric: No
Center Bore Diameter (in): 5.15
Center Cap Included: No
Offset (mm): 0

Obviously I don't want to order rims mail order without being sure......

Tim240Z · 10-08-2005, 11:33 AM

Hmm...the link was bad. Try this one:
http://store.summitracing.com/partde...=KeywordSearch

Yup, that one works...

Anyone?

Tim240Z · 10-09-2005, 10:06 PM

Am I on my own with this one? I guess I can pull my existing wheels off and measure for myself........

Robert1970C20rstbukt · 10-09-2005, 10:26 PM

yep, they should fit. i know our trucks(with 8 lugs

) have an 8x6.5 bolt pattern, but i ain't sure about the backspacing. you'll have to check that one yourself.

Aquivarious · 10-09-2005, 11:45 PM

Ill bet if you asked about a 5 or 6 lug wheel, youd have an answer quicker than..... quick!

Sorry I couldnt help out on this one...

Tim240Z · 10-10-2005, 12:54 PM

Yeah, I figure backspacing at 4.5 inches should be good. I was wondering about the center hole of the rim at 5.15 inches.....is that big enough to fit the 3/4 ton axles?

10-05-2005, 03:00 PM	#1
Tim240Z Senior Member Join Date: Jan 2005 Location: LAX area, So Cal Posts: 499	Followup wheel question Followup to this thread: http://67-72chevytrucks.com/vboard/s....php3?t=175306 Will this rim work on a 71 C20 Fleet? http://store.summitracing.com/defaul...=egnsearch.asp Rim Diameter (in): 17 Rim Width (in): 8.00 Backspacing (in): 4.50 Beadlock Functional: No Beadlock Included: No Rim Material: Steel Center Material: Steel Wheel Finish: Chrome Lug Nut Seat Style: Conical seat Wheel Construction: 2-piece Conical Seat Taper: 60 degree Hub Centric: No Center Bore Diameter (in): 5.15 Center Cap Included: No Offset (mm): 0 Obviously I don't want to order rims mail order without being sure...... __________________ 1972 Suburban C20 454/TH700R4, eaton-corporate 4.10 (looking for 3.7) Sold: 71 Cheyenne 20 Installed a 99 5.7L L31/4L60E from Suburban 1500 (2005) Last edited by Tim240Z; 10-05-2005 at 03:00 PM.

10-08-2005, 11:33 AM	#2
Tim240Z Senior Member Join Date: Jan 2005 Location: LAX area, So Cal Posts: 499	Hmm...the link was bad. Try this one: http://store.summitracing.com/partde...=KeywordSearch Yup, that one works... Anyone? __________________ 1972 Suburban C20 454/TH700R4, eaton-corporate 4.10 (looking for 3.7) Sold: 71 Cheyenne 20 Installed a 99 5.7L L31/4L60E from Suburban 1500 (2005)

10-09-2005, 10:06 PM	#3
Tim240Z Senior Member Join Date: Jan 2005 Location: LAX area, So Cal Posts: 499	Am I on my own with this one? I guess I can pull my existing wheels off and measure for myself........ __________________ 1972 Suburban C20 454/TH700R4, eaton-corporate 4.10 (looking for 3.7) Sold: 71 Cheyenne 20 Installed a 99 5.7L L31/4L60E from Suburban 1500 (2005)

10-09-2005, 10:26 PM	#4
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	yep, they should fit. i know our trucks(with 8 lugs ) have an 8x6.5 bolt pattern, but i ain't sure about the backspacing. you'll have to check that one yourself. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

10-09-2005, 11:45 PM	#5
Aquivarious Registered User Join Date: Sep 2005 Location: Alton, Illinois Posts: 90	Ill bet if you asked about a 5 or 6 lug wheel, youd have an answer quicker than..... quick! Sorry I couldnt help out on this one... __________________ '71 Chevy C-10 SWB (Project) '04 Mazda RX-8 (F*** around Car) '85 Chevy C-20 (Former Project) Currently Serving In IRAQ. (Man it sucks over here..)

10-10-2005, 12:54 PM	#6
Tim240Z Senior Member Join Date: Jan 2005 Location: LAX area, So Cal Posts: 499	Yeah, I figure backspacing at 4.5 inches should be good. I was wondering about the center hole of the rim at 5.15 inches.....is that big enough to fit the 3/4 ton axles? __________________ 1972 Suburban C20 454/TH700R4, eaton-corporate 4.10 (looking for 3.7) Sold: 71 Cheyenne 20 Installed a 99 5.7L L31/4L60E from Suburban 1500 (2005)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.