Tranny line help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jcarlar1 · 10-21-2005, 10:51 PM

I'm wondering if any of you have bought pre-bent trans cooler lines for a 700R4 in a 67-72 and if you have , where, and approximate cost. Any leads would be greatly appreciated, John

cdowns · 10-21-2005, 11:20 PM

i just used a set of th350prebent that i got from LMC they worked good //the inlet outlet of the 700r4 20049 are in about the same locations as the original th350

Jakes-66-K10 · 10-22-2005, 02:10 AM

I got my cooling line from Autozone, it's all flexible so I didn't have to worry about bending. I just routed it inside the frame and used the existing fuel or brake lines to help route the tubing and keep it from getting near moving parts. Been holding up great so far, was cheap, and took just a few minutes to install.

**GMCPaul** · 10-22-2005, 02:54 AM

We carry the correct pre-bent 700R4 transmission lines for 67-72 trucks, you'll find them in steel or stainless steel here on our site
http://www.gmcpauls.com/engine_&_transmission_lines.htm
GMCPaul

jcarlar1 · 10-22-2005, 09:01 AM

Thank you all for your response, GMC Paul you will find that the order has been placed today. By the way thanks for super fast shipments on all my previous orders, you're a good man to do business with! Thanks again, John

10-21-2005, 10:51 PM	#1
jcarlar1 You Are Not Forgotten Join Date: Aug 2004 Location: Laurens, SC Posts: 45	Tranny line help I'm wondering if any of you have bought pre-bent trans cooler lines for a 700R4 in a 67-72 and if you have , where, and approximate cost. Any leads would be greatly appreciated, John __________________ If you don't know where you are going, any road will take you there!

10-21-2005, 11:20 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Tranny line help i just used a set of th350prebent that i got from LMC they worked good //the inlet outlet of the 700r4 20049 are in about the same locations as the original th350 __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-22-2005, 02:10 AM	#3
Jakes-66-K10 Registered User Join Date: Aug 2004 Location: Idaho Posts: 640	Re: Tranny line help I got my cooling line from Autozone, it's all flexible so I didn't have to worry about bending. I just routed it inside the frame and used the existing fuel or brake lines to help route the tubing and keep it from getting near moving parts. Been holding up great so far, was cheap, and took just a few minutes to install.

10-22-2005, 02:54 AM	#4
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,721	Re: Tranny line help We carry the correct pre-bent 700R4 transmission lines for 67-72 trucks, you'll find them in steel or stainless steel here on our site http://www.gmcpauls.com/engine_&_transmission_lines.htm GMCPaul __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM

10-22-2005, 09:01 AM	#5
jcarlar1 You Are Not Forgotten Join Date: Aug 2004 Location: Laurens, SC Posts: 45	Re: Tranny line help Thank you all for your response, GMC Paul you will find that the order has been placed today. By the way thanks for super fast shipments on all my previous orders, you're a good man to do business with! Thanks again, John __________________ If you don't know where you are going, any road will take you there!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.