70 complete chev for parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 10-24-2005, 09:32 PM

I will try selling this complete for parts as there is NO title. This is a parts truck!! 307/3spd. engine will probably run good with fresh gas. It fires and kind of runs now, but i can smell the old gas. Brakes and clutch feel ok. Grill is really nice. Topper is ok for a 1974 model. A few pieces are sold locally IF i part out, but will try to sell complete first. Would like to get around $650/offers or trades.

**too much stuff** · 10-24-2005, 09:44 PM

MODS: if you feel the need to move this to trucks for sale, go ahead. Wasn't sure because it is for parts. Thanks.

kingsolver72 · 10-24-2005, 09:58 PM

I would be interested in the grille,if you can part out,and if shipping is not too bad.66067

Jakes-66-K10 · 10-24-2005, 10:32 PM

Seems like a really good parts truck. You have quite the collection, I see in the first pic a total of 4 trucks lurking around. How many more are NOT shown? Sheesh!

**too much stuff** · 10-24-2005, 11:17 PM

vortex, The green one in the background is a 72 super, the orange one by the garage is a 70 big block 4x4, and the one you see the edge of is my 69 cst big block truck. My 70 blazer is by the 4x4, my wifes 70 shortbed is in the yard and about 10 more at a buddys house. I think i'm addicted.

**Gary 70 Jimmy** · 10-25-2005, 11:05 AM

If you decide to part it out I would be interested in the door panels if they are in good shape.

**too much stuff** · 10-25-2005, 11:16 AM

rick980, its not such a sad thing. The 69 went to town this morning, the 70 shortbed will be going to work later and the 70 4x4 was driving around less than a month ago. The super is a complete truck that is a typical MN truck (rusty) and needs a fuel pump. I have oversize tires on it and the blazer that are always aired up to keep them off the ground. I am offering the 70 here as a complete truck which i could easily put in my storage and let it rot away. I don't mind making a few bucks here and there, but it is more of a passion. The other 10 in storage are basically parts rigs, and you would be surprised how many parts are on other trucks running around northern MN. Thanks for your concern.

BigMike · 10-25-2005, 03:06 PM

That looked like my yard about 15 years ago...Now I have a gardner cut the grass once a week, flowers in the planter and a dirt free driveway...I MISS MY OLD YARD SOO BAD!!!

You are truly a King in his Castle

Mike

teeitup · 10-25-2005, 06:56 PM

Eric, nice truck well worth the $$$ your asking. You need to quit hoard'n all those trucks up there

srhart71 · 10-25-2005, 08:21 PM

What shape is the cab in? Any pictures of the corners, floor, underneath, the usual rusted spots?

**phase_one** · 10-25-2005, 09:40 PM

I would like a crack at the griil if others in front of do not buy if you part out. I wish you were closer.

bigblue1968 · 10-25-2005, 10:01 PM

do you have a set of door panels you would be willing to let go of? also anything you have for a 1968 grill. let me know im in need.

LUV2XCLR8 · 10-25-2005, 10:21 PM

It looks like it has the full heat riser thingamabobber sheild still on it in tact

AesC10s · 10-25-2005, 10:36 PM

i need a pair of black visors that ae in good condition if you have a set. just tell me how much you want. Aaron

davidh · 10-26-2005, 12:55 PM

Too bad for the rust. Looks like it doesn't have many dents. Here in Oklahoma it would be less rusty but dented up by a farmer. Someone could stick on their land where they hunt and use it as a hunting rig.

blazingmiracle · 10-26-2005, 08:45 PM

I'm looking for a set of 12 bolt 30 spline axles with a 5 on 5 bolt pattern.....got any around? Or know where i can get some? the rearend i need them for is a 58" rear end out of a 1970 1/2 ton truck.

**too much stuff** · 10-27-2005, 12:07 AM

srhart, the cab has been patched once already and could use it again.
phase 1, Have a few ahead of you on the grill IF i part out.
Randy, just trying to keep up with you!!!!
bigblue, What style (year) door panels are you looking for?
Aesc10, I think i have a set of black visors, will check tomorrow.
blazingmiracle, not sure if the 5 lug axle will swap with yours. Don't think i have anything right now.

86swb · 10-28-2005, 10:08 PM

It always makes me wonder what ever happens to the tailgates when the owner takes it off and goes with the camper. Throw it away? Store it?

**too much stuff** · 10-29-2005, 10:34 AM

The tailgate is on his kids 72, which is for sale also, but haven't seen it.

bigblue1968 · 10-29-2005, 09:12 PM

1968

**too much stuff** · 10-30-2005, 08:14 AM

Big blue, i have a set of 67 door panels. However, i will be leaving shortly and won't be back until sat. or sun. Send a pm and i will check when i get back. Eric

chevykevy · 10-30-2005, 12:12 PM

I would be interestde in the spark plug heat shields and the wire lomms that bolt under and in the rear of the engine. Or maybe you have others you would sell? Thanks

roughedup72 · 11-01-2005, 10:29 PM

how much for the 72 super?I need doors and fenders for a 72.

ol yellow 72 · 11-06-2005, 08:16 AM

wanna sell that radio delete

**too much stuff** · 11-06-2005, 10:55 AM

Chevykevy, i think i have some, let me look.
roughed up, the super isn't for sale, and no good body panels for sale. MN is a little tough on sheetmetal.
ol yellow, i have a radiodelete that has some rust and no clips. $10

10-24-2005, 09:32 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	70 complete chev for parts I will try selling this complete for parts as there is NO title. This is a parts truck!! 307/3spd. engine will probably run good with fresh gas. It fires and kind of runs now, but i can smell the old gas. Brakes and clutch feel ok. Grill is really nice. Topper is ok for a 1974 model. A few pieces are sold locally IF i part out, but will try to sell complete first. Would like to get around $650/offers or trades. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-24-2005, 09:44 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 70 complete chev for parts MODS: if you feel the need to move this to trucks for sale, go ahead. Wasn't sure because it is for parts. Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-24-2005, 09:58 PM	#3
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,245	Re: 70 complete chev for parts I would be interested in the grille,if you can part out,and if shipping is not too bad.66067 __________________ Fight the good fight, finish the race, keep the faith

10-24-2005, 10:32 PM	#4
Jakes-66-K10 Registered User Join Date: Aug 2004 Location: Idaho Posts: 640	Re: 70 complete chev for parts Seems like a really good parts truck. You have quite the collection, I see in the first pic a total of 4 trucks lurking around. How many more are NOT shown? Sheesh!

10-24-2005, 11:17 PM	#5
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 70 complete chev for parts vortex, The green one in the background is a 72 super, the orange one by the garage is a 70 big block 4x4, and the one you see the edge of is my 69 cst big block truck. My 70 blazer is by the 4x4, my wifes 70 shortbed is in the yard and about 10 more at a buddys house. I think i'm addicted. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-25-2005, 11:05 AM	#6
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: 70 complete chev for parts If you decide to part it out I would be interested in the door panels if they are in good shape.

10-25-2005, 11:16 AM	#7
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 70 complete chev for parts rick980, its not such a sad thing. The 69 went to town this morning, the 70 shortbed will be going to work later and the 70 4x4 was driving around less than a month ago. The super is a complete truck that is a typical MN truck (rusty) and needs a fuel pump. I have oversize tires on it and the blazer that are always aired up to keep them off the ground. I am offering the 70 here as a complete truck which i could easily put in my storage and let it rot away. I don't mind making a few bucks here and there, but it is more of a passion. The other 10 in storage are basically parts rigs, and you would be surprised how many parts are on other trucks running around northern MN. Thanks for your concern. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-25-2005, 03:06 PM	#8
BigMike Registered User Join Date: Sep 2004 Location: Rancho Santa Margarita - SoCal Posts: 1,432	Re: 70 complete chev for parts That looked like my yard about 15 years ago...Now I have a gardner cut the grass once a week, flowers in the planter and a dirt free driveway...I MISS MY OLD YARD SOO BAD!!! You are truly a King in his Castle Mike __________________ Mike My 69 SWB Project Father/Son 72 Nova Project My Airbrushed RC Car Bodies Last edited by BigMike; 10-25-2005 at 03:07 PM.

10-25-2005, 06:56 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 70 complete chev for parts Eric, nice truck well worth the $$$ your asking. You need to quit hoard'n all those trucks up there __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-25-2005, 08:21 PM	#10
srhart71 Registered User Join Date: Jul 2002 Location: China Grove, NC Posts: 147	Re: 70 complete chev for parts What shape is the cab in? Any pictures of the corners, floor, underneath, the usual rusted spots?

10-25-2005, 09:40 PM	#11
phase_one Registered User Join Date: Jul 2001 Location: Praireville. LA 70769 Posts: 390	Re: 70 complete chev for parts I would like a crack at the griil if others in front of do not buy if you part out. I wish you were closer. __________________ 11 Surbaban 70 C 10 still in progress

10-25-2005, 10:01 PM	#12
bigblue1968 Registered User Join Date: Oct 2005 Location: Warner Robins, Georgia Posts: 34	Re: 70 complete chev for parts do you have a set of door panels you would be willing to let go of? also anything you have for a 1968 grill. let me know im in need.

10-25-2005, 10:21 PM	#13
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: 70 complete chev for parts It looks like it has the full heat riser thingamabobber sheild still on it in tact __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 10-25-2005 at 10:22 PM.

10-25-2005, 10:36 PM	#14
AesC10s Chevy truck addict Join Date: Apr 2005 Location: Thornton Colorado Posts: 825	Re: 70 complete chev for parts i need a pair of black visors that ae in good condition if you have a set. just tell me how much you want. Aaron

10-26-2005, 12:55 PM	#15
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,220	Re: 70 complete chev for parts Too bad for the rust. Looks like it doesn't have many dents. Here in Oklahoma it would be less rusty but dented up by a farmer. Someone could stick on their land where they hunt and use it as a hunting rig.



Register or Log In To remove these advertisements.

10-26-2005, 08:45 PM	#16
blazingmiracle Registered User Join Date: Oct 2005 Location: CA Posts: 2	Re: 70 complete chev for parts I'm looking for a set of 12 bolt 30 spline axles with a 5 on 5 bolt pattern.....got any around? Or know where i can get some? the rearend i need them for is a 58" rear end out of a 1970 1/2 ton truck. Last edited by blazingmiracle; 10-26-2005 at 08:45 PM.

10-27-2005, 12:07 AM	#17
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 70 complete chev for parts srhart, the cab has been patched once already and could use it again. phase 1, Have a few ahead of you on the grill IF i part out. Randy, just trying to keep up with you!!!! bigblue, What style (year) door panels are you looking for? Aesc10, I think i have a set of black visors, will check tomorrow. blazingmiracle, not sure if the 5 lug axle will swap with yours. Don't think i have anything right now. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-28-2005, 10:08 PM	#18
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: 70 complete chev for parts It always makes me wonder what ever happens to the tailgates when the owner takes it off and goes with the camper. Throw it away? Store it? __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

10-29-2005, 10:34 AM	#19
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 70 complete chev for parts The tailgate is on his kids 72, which is for sale also, but haven't seen it. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-29-2005, 09:12 PM	#20
bigblue1968 Registered User Join Date: Oct 2005 Location: Warner Robins, Georgia Posts: 34	Re: 70 complete chev for parts 1968

10-30-2005, 08:14 AM	#21
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 70 complete chev for parts Big blue, i have a set of 67 door panels. However, i will be leaving shortly and won't be back until sat. or sun. Send a pm and i will check when i get back. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-30-2005, 12:12 PM	#22
chevykevy Registered User Join Date: Jan 2004 Location: Wyoming Posts: 641	Re: 70 complete chev for parts I would be interestde in the spark plug heat shields and the wire lomms that bolt under and in the rear of the engine. Or maybe you have others you would sell? Thanks

11-01-2005, 10:29 PM	#23
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: 70 complete chev for parts how much for the 72 super?I need doors and fenders for a 72.

11-06-2005, 08:16 AM	#24
ol yellow 72 Registered User Join Date: Aug 2005 Location: kentucky Posts: 210	Re: 70 complete chev for parts wanna sell that radio delete

11-06-2005, 10:55 AM	#25
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 70 complete chev for parts Chevykevy, i think i have some, let me look. roughed up, the super isn't for sale, and no good body panels for sale. MN is a little tough on sheetmetal. ol yellow, i have a radiodelete that has some rust and no clips. $10 __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode