70 c-10 back half - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Seabiscut · 11-17-2005, 06:44 AM

Here are some before and after pictures of my 1970 c-10 pickup. It has been back-halfed from the back of the cab rearward. The bags are going to be mounted at the end of trailing arm. One off Watts Link will be used as the axle locating device. These are just a few pics more will be posted as progress continues.

**dennislbrooks** · 11-17-2005, 05:09 PM

nice fab job, what does the inside of the bed look like?

LUV2XCLR8 · 11-17-2005, 05:33 PM

Seabiscut · 11-17-2005, 09:00 PM

The inside of the bed is colormatched rhino liner but the floor of the bed is geting completly cut out and replaced with a floor that contours the rails

**N2TRUX** · 11-18-2005, 12:44 AM

Nice looking frame rails. Can you reload your pics on a site so we can see them...

Izzy · 11-18-2005, 11:07 AM

Doh can't see the pics.

omar69chevy · 11-24-2005, 09:44 PM

cant see the pics and really want to see

lvscott · 11-24-2005, 09:57 PM

how much of a step would you say that is? also do you have any kind of mesurements you could give me. i'm thinking about doing the same thing and knowing what angle to set the rails starting behind the cab as well as how long the sections need to be and what size rec tube to use would be very helpful.

thank you,
brandon

omar69chevy · 11-24-2005, 10:05 PM

damn thats nice hom much would u charge for something like that?

XXL · 11-24-2005, 11:10 PM

What additional clearance did you gain where the trailing arms (eventually) hit the frame?

Seabiscut · 11-28-2005, 10:27 PM

I am using 2X4 square tubing and the frame rails have alot of rake in the front to clear the trailing arms. As of right now i have 73 dollors in tubing an about 40 hours time but to have this done it would cost a lot more

omar69chevy · 11-29-2005, 09:38 PM

give me a price if u can and if u would build another, im really interseted with income around the corner.

omar69chevy · 11-29-2005, 09:39 PM

]give me a price if u can and if u would build another, im really interseted with income around the corner. now that u have it built it will probably be easier to duplicate it. let me know

a squarecan · 11-29-2005, 09:55 PM

Very nice!!!

I was trying to figure out the best way to mate my back half with the stock frame and now I know! Very nice work! Where are you located I could use some handy work like that on my truck sinse I dont have much time to work on it my self.

Keith

Seabiscut · 11-30-2005, 05:32 PM

This will be very easy to duplicate i still have all of my angles and measurments and I would build another. all said and done with metal and labor your probly looking at $2500. I live in fredericksburg, VA If you are close i would gladly give a hand.

zach

bigbuc · 12-05-2005, 08:10 PM

sent you a PM seabiscut

11-17-2005, 06:44 AM	#1
Seabiscut Registered User Join Date: Apr 2005 Posts: 8	70 c-10 back half Here are some before and after pictures of my 1970 c-10 pickup. It has been back-halfed from the back of the cab rearward. The bags are going to be mounted at the end of trailing arm. One off Watts Link will be used as the axle locating device. These are just a few pics more will be posted as progress continues.

11-17-2005, 05:09 PM	#2
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,766	Re: 70 c-10 back half nice fab job, what does the inside of the bed look like?

11-17-2005, 05:33 PM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,476	Re: 70 c-10 back half __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

11-17-2005, 09:00 PM	#4
Seabiscut Registered User Join Date: Apr 2005 Posts: 8	Re: 70 c-10 back half The inside of the bed is colormatched rhino liner but the floor of the bed is geting completly cut out and replaced with a floor that contours the rails

11-18-2005, 12:44 AM	#5
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: 70 c-10 back half Nice looking frame rails. Can you reload your pics on a site so we can see them... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

11-18-2005, 11:07 AM	#6
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	Re: 70 c-10 back half Doh can't see the pics.

11-24-2005, 09:44 PM	#7
omar69chevy Registered User Join Date: Nov 2004 Location: Kingsville, TX Posts: 22	Re: 70 c-10 back half cant see the pics and really want to see

11-24-2005, 09:57 PM	#8
lvscott Registered User Join Date: Mar 2005 Location: Las Vegas, NV Posts: 84	Re: 70 c-10 back half how much of a step would you say that is? also do you have any kind of mesurements you could give me. i'm thinking about doing the same thing and knowing what angle to set the rails starting behind the cab as well as how long the sections need to be and what size rec tube to use would be very helpful. thank you, brandon

11-24-2005, 10:05 PM	#9
omar69chevy Registered User Join Date: Nov 2004 Location: Kingsville, TX Posts: 22	Re: 70 c-10 back half damn thats nice hom much would u charge for something like that?

11-24-2005, 11:10 PM	#10
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Re: 70 c-10 back half What additional clearance did you gain where the trailing arms (eventually) hit the frame? __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

11-28-2005, 10:27 PM	#11
Seabiscut Registered User Join Date: Apr 2005 Posts: 8	Re: 70 c-10 back half I am using 2X4 square tubing and the frame rails have alot of rake in the front to clear the trailing arms. As of right now i have 73 dollors in tubing an about 40 hours time but to have this done it would cost a lot more

11-29-2005, 09:38 PM	#12
omar69chevy Registered User Join Date: Nov 2004 Location: Kingsville, TX Posts: 22	Re: 70 c-10 back half give me a price if u can and if u would build another, im really interseted with income around the corner.

11-29-2005, 09:39 PM	#13
omar69chevy Registered User Join Date: Nov 2004 Location: Kingsville, TX Posts: 22	Re: 70 c-10 back half ]give me a price if u can and if u would build another, im really interseted with income around the corner. now that u have it built it will probably be easier to duplicate it. let me know

11-29-2005, 09:55 PM	#14
a squarecan Registered User Join Date: Mar 2004 Location: Portland, Oregon Posts: 232	Re: 70 c-10 back half Very nice!!! I was trying to figure out the best way to mate my back half with the stock frame and now I know! Very nice work! Where are you located I could use some handy work like that on my truck sinse I dont have much time to work on it my self. Keith

11-30-2005, 05:32 PM	#15
Seabiscut Registered User Join Date: Apr 2005 Posts: 8	Re: 70 c-10 back half This will be very easy to duplicate i still have all of my angles and measurments and I would build another. all said and done with metal and labor your probly looking at $2500. I live in fredericksburg, VA If you are close i would gladly give a hand. zach



Register or Log In To remove these advertisements.

12-05-2005, 08:10 PM	#16
bigbuc Certified Pud Puller Join Date: Nov 2005 Location: hollywood,MD Posts: 105	Re: 70 c-10 back half sent you a PM seabiscut __________________ 1997 Silverado extended cab- mpfi conversion, 22" kmc's 1983 C10- some assembly required 99.5 F250 Super Duty 7.3 5" straight pipe, wicked wheel, ts tuner, ccv mod, 4" lift 315/75/16s

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.