Bed swap question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dave666693 · 11-17-2005, 07:34 AM

I have a '67 fleetside long box. Can I put a stepside bed from any 67-72 on there? Will it bolt right up or is it a big deal? Thanks

**Palf70Step** · 11-17-2005, 07:43 AM

They will swap. if your stepbed is not complete, you'll need different cross sills and the wiring harness for the step bed. Other than that, it is unbolt, lift remove, then drop on the newbed and bolt her down.

EDit...Oh yeah, for looks you will probably want to switcxh rear bumpers depending on the type bumper you have. The step bed bumper is a lot narrower.

dave666693 · 11-17-2005, 07:45 AM

Thanks Bill

55chevy · 11-17-2005, 12:22 PM

Quote:

Originally Posted by dave666693

I have a '67 fleetside long box. Can I put a stepside bed from any 67-72 on there? Will it bolt right up or is it a big deal? Thanks

This is assuming that you use a long step bed, a short step bed requires the frame be shortened. Nevermind if you already knew that.

JustLiveIt · 11-30-2005, 04:32 PM

If it works for the LWB trucks can I assume that I can swap from a SWB stepside to a SWB fleetside easily?

BTW I am new to this board and am still looking for a truck. SWB stepsides seem to be more plentiful than SWB fleetsides.

Thanks!

Longhorn Man · 11-30-2005, 06:23 PM

welcome to the board... and yes, you are correct

JustLiveIt · 11-30-2005, 07:37 PM

Thanks for the reply!

11-17-2005, 07:34 AM	#1
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 901	Bed swap question I have a '67 fleetside long box. Can I put a stepside bed from any 67-72 on there? Will it bolt right up or is it a big deal? Thanks

11-17-2005, 07:43 AM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Bed swap question They will swap. if your stepbed is not complete, you'll need different cross sills and the wiring harness for the step bed. Other than that, it is unbolt, lift remove, then drop on the newbed and bolt her down. EDit...Oh yeah, for looks you will probably want to switcxh rear bumpers depending on the type bumper you have. The step bed bumper is a lot narrower. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 11-17-2005 at 07:44 AM.

11-17-2005, 07:45 AM	#3
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 901	Re: Bed swap question Thanks Bill

11-30-2005, 04:32 PM	#5
JustLiveIt Registered User Join Date: Nov 2005 Location: Los Angeles, Ca Posts: 135	Re: Bed swap question If it works for the LWB trucks can I assume that I can swap from a SWB stepside to a SWB fleetside easily? BTW I am new to this board and am still looking for a truck. SWB stepsides seem to be more plentiful than SWB fleetsides. Thanks!

11-30-2005, 06:23 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Bed swap question welcome to the board... and yes, you are correct

11-30-2005, 07:37 PM	#7
JustLiveIt Registered User Join Date: Nov 2005 Location: Los Angeles, Ca Posts: 135	Re: Bed swap question Thanks for the reply!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.