Autometer Cluster Sizing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69Custom · 11-18-2005, 11:56 PM

I know I remeber that this was covered before, but what sizes do I need to convert my cluster to Autometer guages. I would like it to look as clean as possible. I think I remember that there are two ways of doing it.

Thanks
Jeremy

**Hart_Rod** · 11-19-2005, 12:58 AM

2 large ones are 5 inch
Center one is 3 3/8 inch
4 small ones are 2 5/8 inch

Rob

**Palf70Step** · 11-19-2005, 08:28 AM

Check with putter, he can even tell you gauge numbers of what can go where. he's been assembling a few for others lately.

**Hart_Rod** · 11-19-2005, 10:11 AM

Check this out:

http://67-72chevytrucks.com/vboard/s...d.php?t=180366

70c10 · 11-19-2005, 10:13 AM

You can also use 2 1/16" for the smaller holes.

Mudder · 11-19-2005, 10:23 AM

I have been watching ebay for several months now for a 3 3/8 black faced guage and I have had no luck. The Mooneyes clock is about the only option I have found for something black in the middle hole.

69Custom · 11-19-2005, 11:06 AM

Thanks for the replies. I need to use electrical guages since I am running a 5.3L. Which look better in the small hole, the 2 5/8 or the 2 1/16.

Thanks
Jeremy

djracer · 11-19-2005, 01:03 PM

I prefer the larger! Have you guys searched the web for the 3 3/8 gauges? I bought one not that long ago!

c10crazy · 11-19-2005, 05:10 PM

If you go on ebay and type in Autometer you will see just about every type, size and style.

Mudder · 11-19-2005, 07:37 PM

Here is mine with 5", 3 3/8", and 2 5/8".

70c10 · 11-19-2005, 09:44 PM

Randy- your dash looks killer

70short/step · 11-19-2005, 09:46 PM

I want your Fuel Gauge!

Mudder · 11-19-2005, 10:07 PM

Thanks Jim. I lucked out with that fuel gauge. I tried to order one about 2 weeks after I got that one and they didn't have anymore.

**Hart_Rod** · 11-19-2005, 10:22 PM

Mudder,

How long ago did you order it?

Rob

Mudder · 11-19-2005, 10:33 PM

Its been over 2 years ago.

**Hart_Rod** · 11-19-2005, 10:45 PM

Don't suppose you want to sell it?

LOL!

Putter · 11-21-2005, 11:17 AM

Here are mine....similar to Mudder, but mounted from behind....

Usually on E-bay, you can find the 5503 fuel pressure gauge and the 5510 Oil Temp. Usually the seller is DealMonger.

72 longhorn BB · 11-21-2005, 02:02 PM

Hey there Putter,
What did you put in the far side (right) 2 lower holes?

Did you ever put up a parts list for what you did?

mocwon · 11-21-2005, 02:43 PM

Rumor has it that Autometer discontinued the 3-3/8" size gauges.

djracer · 11-21-2005, 02:48 PM

its not a rumor its a fact! If you know where to look their are still a few around!

Putter · 11-21-2005, 04:02 PM

Quote:

Originally Posted by 72 longhorn BB

Hey there Putter,
What did you put in the far side (right) 2 lower holes?

Did you ever put up a parts list for what you did?

Volts & Oil Pressure are on the other side of the cluster.

11-18-2005, 11:56 PM	#1
69Custom Registered User Join Date: Mar 2000 Location: Elizabethtown ,PA,USA Posts: 347	Autometer Cluster Sizing I know I remeber that this was covered before, but what sizes do I need to convert my cluster to Autometer guages. I would like it to look as clean as possible. I think I remember that there are two ways of doing it. Thanks Jeremy __________________ 1972 Chevy C-10 Short Stepside 6Cyl, 3 spd, not opts (Current Project) Now a 2004 SSR 5.3L with 4L60E Now Ididit tilt- ps, pb 2002 Saturn L200 2006 Toyota Highlander HYBRID

11-19-2005, 12:58 AM	#2
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: Autometer Cluster Sizing 2 large ones are 5 inch Center one is 3 3/8 inch 4 small ones are 2 5/8 inch Rob __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

11-19-2005, 08:28 AM	#3
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: Autometer Cluster Sizing Check with putter, he can even tell you gauge numbers of what can go where. he's been assembling a few for others lately. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-19-2005, 10:11 AM	#4
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: Autometer Cluster Sizing Check this out: http://67-72chevytrucks.com/vboard/s...d.php?t=180366 __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

11-19-2005, 10:13 AM	#5
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Autometer Cluster Sizing You can also use 2 1/16" for the smaller holes. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

11-19-2005, 10:23 AM	#6
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: Autometer Cluster Sizing I have been watching ebay for several months now for a 3 3/8 black faced guage and I have had no luck. The Mooneyes clock is about the only option I have found for something black in the middle hole.

11-19-2005, 11:06 AM	#7
69Custom Registered User Join Date: Mar 2000 Location: Elizabethtown ,PA,USA Posts: 347	Re: Autometer Cluster Sizing Thanks for the replies. I need to use electrical guages since I am running a 5.3L. Which look better in the small hole, the 2 5/8 or the 2 1/16. Thanks Jeremy __________________ 1972 Chevy C-10 Short Stepside 6Cyl, 3 spd, not opts (Current Project) Now a 2004 SSR 5.3L with 4L60E Now Ididit tilt- ps, pb 2002 Saturn L200 2006 Toyota Highlander HYBRID

11-19-2005, 01:03 PM	#8
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Autometer Cluster Sizing I prefer the larger! Have you guys searched the web for the 3 3/8 gauges? I bought one not that long ago! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-19-2005, 05:10 PM	#9
c10crazy Like a Rock! Join Date: May 2002 Location: USA Posts: 1,092	Re: Autometer Cluster Sizing If you go on ebay and type in Autometer you will see just about every type, size and style. __________________ 69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park!

11-19-2005, 07:37 PM	#10
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: Autometer Cluster Sizing Here is mine with 5", 3 3/8", and 2 5/8". Attached Images

11-19-2005, 09:44 PM	#11
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Autometer Cluster Sizing Randy- your dash looks killer __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

11-19-2005, 09:46 PM	#12
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	Re: Autometer Cluster Sizing I want your Fuel Gauge! __________________ For every person with a spark of genius, There are a hundred with ignition trouble. 70 Short/Step

11-19-2005, 10:07 PM	#13
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: Autometer Cluster Sizing Thanks Jim. I lucked out with that fuel gauge. I tried to order one about 2 weeks after I got that one and they didn't have anymore.

11-19-2005, 10:22 PM	#14
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: Autometer Cluster Sizing Mudder, How long ago did you order it? Rob __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

11-19-2005, 10:33 PM	#15
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: Autometer Cluster Sizing Its been over 2 years ago.



Register or Log In To remove these advertisements.

11-19-2005, 10:45 PM	#16
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: Autometer Cluster Sizing Don't suppose you want to sell it? LOL! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

11-21-2005, 11:17 AM	#17
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Autometer Cluster Sizing Here are mine....similar to Mudder, but mounted from behind.... Usually on E-bay, you can find the 5503 fuel pressure gauge and the 5510 Oil Temp. Usually the seller is DealMonger. Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 11-21-2005 at 11:20 AM.

11-21-2005, 02:02 PM	#18
72 longhorn BB Registered User Join Date: Jan 2000 Location: Michigan Posts: 312	Re: Autometer Cluster Sizing Hey there Putter, What did you put in the far side (right) 2 lower holes? Did you ever put up a parts list for what you did? __________________ Chuck 1972 C-20 Longhorn 402 BB .030" over (409?), curved HEI, RV cam, quadrajet, dual 3" exhaust, TH 400 ported w/shift kit 1999 K1500 Suburban (old style) 5.7L Vortec 4L60E "No matter where you go, ........ there you are"

11-21-2005, 02:43 PM	#19
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	Re: Autometer Cluster Sizing Rumor has it that Autometer discontinued the 3-3/8" size gauges. __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

11-21-2005, 02:48 PM	#20
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Autometer Cluster Sizing its not a rumor its a fact! If you know where to look their are still a few around! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.