WTB- SBC in Houston, TX - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ole Blue 68 · 12-01-2005, 02:14 PM

Hi All,

I'm looking for a used running SBC that I could pick up in the Houston area. I would prefer a 327 since that was what my truck originally had but would also look at a 350.

As far as a time frame for the purchase, I'm looking at the end of December or January.

Thanks,

John

Ole Blue 68 · 12-02-2005, 05:33 PM

Anyone?

I'm willing to drive to get it. Say up to 120 miles.

matt67350 · 12-02-2005, 08:06 PM

I have a running 350 I'd sell. It's in my 67 and I'll need till January to get a motor built up. $550.00 carb to pan or $450.00 for the long block.

Matthew

Robert1970C20rstbukt · 12-02-2005, 09:04 PM

I still have that 307 that's bored .40 over for sale, asking $350. Runs great, no knocks, no smoke, also has a high pressure oil pump. Clean it, paint it, and it'll be ready to go. I can have pics by next week.

Ole Blue 68 · 12-03-2005, 12:26 AM

Matt, can you get me more details on the 350?

Robert, I haven't forgotten about that 307 either. If you could get me some pics, I'd appreciate it.

matt67350 · 12-03-2005, 01:39 AM

350 2-bolt main, stock 350 heads, performer intake, 1406 carb.
I drive the 67 daily. Motor has about 60,000 miles on it. Resent valve job on heads. In April if I remember. Did the work before I installed it in the 67.
I'm upgradng to a 454 n the 67. Saw your post and thought it's what you are looking for. Just a stock 350, but t does run good and no smoke.

Matthew

Ole Blue 68 · 12-03-2005, 03:01 PM

Thanks Matt, pm sent.

Robert1970C20rstbukt · 12-03-2005, 05:46 PM

You got it. We're gonna buy a digital camera so I oughtta have 'em soon.

12-01-2005, 02:14 PM	#1
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	WTB- SBC in Houston, TX Hi All, I'm looking for a used running SBC that I could pick up in the Houston area. I would prefer a 327 since that was what my truck originally had but would also look at a 350. As far as a time frame for the purchase, I'm looking at the end of December or January. Thanks, John

12-02-2005, 05:33 PM	#2
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: WTB- SBC in Houston, TX Anyone? I'm willing to drive to get it. Say up to 120 miles.

12-02-2005, 08:06 PM	#3
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	Re: WTB- SBC in Houston, TX I have a running 350 I'd sell. It's in my 67 and I'll need till January to get a motor built up. $550.00 carb to pan or $450.00 for the long block. Matthew __________________ 69 swb stepside, rebuild and upgrade in progress

12-02-2005, 09:04 PM	#4
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Re: WTB- SBC in Houston, TX I still have that 307 that's bored .40 over for sale, asking $350. Runs great, no knocks, no smoke, also has a high pressure oil pump. Clean it, paint it, and it'll be ready to go. I can have pics by next week. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

12-03-2005, 12:26 AM	#5
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: WTB- SBC in Houston, TX Matt, can you get me more details on the 350? Robert, I haven't forgotten about that 307 either. If you could get me some pics, I'd appreciate it.

12-03-2005, 01:39 AM	#6
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	Re: WTB- SBC in Houston, TX 350 2-bolt main, stock 350 heads, performer intake, 1406 carb. I drive the 67 daily. Motor has about 60,000 miles on it. Resent valve job on heads. In April if I remember. Did the work before I installed it in the 67. I'm upgradng to a 454 n the 67. Saw your post and thought it's what you are looking for. Just a stock 350, but t does run good and no smoke. Matthew __________________ 69 swb stepside, rebuild and upgrade in progress Last edited by matt67350; 01-24-2009 at 09:24 PM.

12-03-2005, 03:01 PM	#7
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: WTB- SBC in Houston, TX Thanks Matt, pm sent.

12-03-2005, 05:46 PM	#8
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Re: WTB- SBC in Houston, TX You got it. We're gonna buy a digital camera so I oughtta have 'em soon. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.