Light switch wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Fred T · 01-15-2006, 03:50 PM

I'm looking for a switch for fog lights. What I would like is a pull/push or rotary switch with a know similar to the stock headlight switch. Does anyone have any ideas on where to get one?

55chevy · 01-15-2006, 06:28 PM

Use a stock headlight switch?

**Ironhorse** · 01-31-2006, 08:45 PM

Hey Fred, I think I may have what you are needing. Are you going to be at the swap meet in Wichita anytime this weekend? I will be there either at my booth or out looking for those needed parts for my Chevelle SS project. I have a switch I found in the garage while looking for something else. (Which I never found, I might add, do that a lot

)

It is a two position push/pull, threaded shaft with a thin locknut and the white plastic knob unscrews, should be able to install an original style washer knob using a set screw. Anyway you may want to look at it if you stop by. See ya, ?

cdowns · 01-31-2006, 08:49 PM

any autoparts store in the usa or canada should have a universal headlight switch// or a boat supply store too

01-15-2006, 03:50 PM	#1
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Light switch wanted I'm looking for a switch for fog lights. What I would like is a pull/push or rotary switch with a know similar to the stock headlight switch. Does anyone have any ideas on where to get one? __________________ Fred There is no such thing as too much cam...just not enough engine.

01-15-2006, 06:28 PM	#2
55chevy Car Truck Bike Nut Join Date: Aug 2005 Location: Suffolk Virginia Posts: 850	Re: Light switch wanted Use a stock headlight switch? __________________ Snow free Florida panhandle, don't miss Indiana winters Temp in Suffolk Virginia, Sentenced 2 to 5 years LOL 68 shortfleet project 94 3500 TD dually so many cars so little time 72 K2 CST 2WD Blazer

01-31-2006, 08:45 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,257	Re: Light switch wanted Hey Fred, I think I may have what you are needing. Are you going to be at the swap meet in Wichita anytime this weekend? I will be there either at my booth or out looking for those needed parts for my Chevelle SS project. I have a switch I found in the garage while looking for something else. (Which I never found, I might add, do that a lot ) It is a two position push/pull, threaded shaft with a thin locknut and the white plastic knob unscrews, should be able to install an original style washer knob using a set screw. Anyway you may want to look at it if you stop by. See ya, ? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-31-2006, 08:49 PM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Light switch wanted any autoparts store in the usa or canada should have a universal headlight switch// or a boat supply store too __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.