01-19-2006, 11:41 PM | #1 | |
Son Of Gravel Man
Join Date: Mar 2005
Location: Cleveland OH
Posts: 638
|
Wheel Spacers
I think to fit the escalade rims I am going to have to run spacers
Any have any suggestion on these? http://store.summitracing.com/defaul....asp&x=22&y=12 Or http://store.summitracing.com/defaul....asp&x=21&y=10 Or is it better to scrap this whole plan and just get some thing different?
__________________
Daily driven 70 C10 longbed Its a work in progress Quote:
|
|
01-20-2006, 07:31 AM | #2 |
Registered User
Join Date: Jan 2001
Location: Meridian, Ms.
Posts: 244
|
Re: Wheel Spacers
Take some measurements on the back spacing of the escalade rims and the rims you are presently running and see how much of a differance you have. Ihad to get some 1.5"& 2" spacers for my wheels that came of a 2000 chevy truck. look at this place for some good wheel spacers.
http://stores.ebay.com/CompleteValue...Q3amesstQQtZkm
__________________
70 C/10 SWB Go ahead chance it........Columbus did!!! Steve (Chitlin) Bacon My DIY Shop http://s24.photobucket.com/albums/c47/mpalmiter/shop/ |
01-20-2006, 11:13 AM | #3 |
Senior Member
Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,785
|
Re: Wheel Spacers
agree, torque all to spec and you should not have probs
|
01-20-2006, 05:47 PM | #4 |
Dork For Days
Join Date: Aug 2005
Location: Dallas
Posts: 407
|
Re: Wheel Spacers
I'm running some thin spacers on the rear of my truck simple cause Chevy liked to tuck the rears inside so much. It's not enough to make the fronts and rears equal, but it certainly helps - looks much better.
The BEST way is to get custom wheels made to exact specs so they fit perfectly. In the real (affordable) world, however wheel spacers aren't a bad way to go. I think the trick is to keep them as thin as possible, though. The thicker you go, to more you're loading your studs and the more likely you'll have a problem. I found that the thin ones (approx. 1/4") are thin enough that you can get away with the factory studs. You gotta make sure you have enough thread engagement!
__________________
1972 C20, 402/700R4 - My first classic truck, bought in September 2005. 85% transformed from "Farm" to "Cool" status! 1970 Dodge Challenger 440, 4sp (my other toy) 12.67 @ 117 MPH, with a pathetic 2.022 60' 2007 Dodge Charger SRT-8 2008 Cadillac CTS All-American garage, baby! |
01-20-2006, 10:24 PM | #5 |
Registered User
Join Date: May 2003
Location: Shreveport LA
Posts: 3,170
|
Re: Wheel Spacers
I had some aluminum ones that cracked and let a front wheel come undone. Killed a tire and flattened a brake rotor. The sparks looked cool, though.
|
01-22-2006, 12:06 AM | #6 | ||
Son Of Gravel Man
Join Date: Mar 2005
Location: Cleveland OH
Posts: 638
|
Re: Wheel Spacers
Quote:
I was only thinking about the 1/4 in ones. I am not going to use any 2 in or more. I'll put them up on ebay and start over if that is the case.
__________________
Daily driven 70 C10 longbed Its a work in progress Quote:
|
||
01-22-2006, 01:01 AM | #7 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,998
|
Re: Wheel Spacers
Stay away from spacers greater than 1/4". Adapters on the other hand.... are ok until about 3".
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|