![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: May 2004
Location: Dickson, TN
Posts: 141
|
Pic Needed: Roch 2bbl Carb Linkage
I'm trying to hookup the linkage on a rochester 2bbl carb...this carb is replacing the factory q-jet...the manifold has been swapped to the 2bbl intake. I just need a pic of the throttle bracket etc for the 2bbl. Thanks.
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2004
Location: Dickson, TN
Posts: 141
|
Re: Pic Needed: Roch 2bbl Carb Linkage
btt
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2005
Location: Wisconsin
Posts: 60
|
Re: Pic Needed: Roch 2bbl Carb Linkage
i may have one ill see what i can do
|
![]() |
![]() |
![]() |
#4 |
Jamie Hyneman is my twin
![]() Join Date: Nov 2005
Location: La Junta, Colorado
Posts: 705
|
Re: Pic Needed: Roch 2bbl Carb Linkage
Here is my monojet, but just like a 2GC. It is all manual from 1967. If you were to set up this carb for a cable accelerator, just attach a ball-stud in the hole that has the accel-linkage, and you will then need a bracket in the back of the intake that mounts to the intake, or the coil bracket. They are available universal from NAPA, or aftermarket.
Automatic transmission will need a kickdown. That is not shown in my picture. ![]()
__________________
Justin SOLD 1967 K10 Fleetside, 283, Front and Rear Posi SOLD Color Wiring Diagrams Now in High Resolution V8 and Cab and Cab and Chassis |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2004
Location: Dickson, TN
Posts: 141
|
Re: Pic Needed: Roch 2bbl Carb Linkage
Ah, that's my problem (thanks). I got this intake and carb from a '69 C10. It's now (temporarily, while I'm building a new engine) on my '77 C10 (cable throttle). I bought a 'universal' bracket that uses one of the carb studs, but it interferes with the linkage on the carb.
Any links to the mainfold bracket that I need? |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Oct 2003
Location: San Jose Ca.
Posts: 3,335
|
Re: Pic Needed: Roch 2bbl Carb Linkage
Not trying to hijack the thread but what is the spring connected to near the coil?
__________________
RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234 |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: May 2004
Location: Dickson, TN
Posts: 141
|
Re: Pic Needed: Roch 2bbl Carb Linkage
My intake has a bracket on the rear that the spring attaches to (near where the coil would be...if mine wasn't HEI).
|
![]() |
![]() |
![]() |
#8 |
Jamie Hyneman is my twin
![]() Join Date: Nov 2005
Location: La Junta, Colorado
Posts: 705
|
Re: Pic Needed: Roch 2bbl Carb Linkage
Here is a better picture of the spring bracket. It appears that under the grime, it attatches to the intake at the coil mounting bracket.
![]()
__________________
Justin SOLD 1967 K10 Fleetside, 283, Front and Rear Posi SOLD Color Wiring Diagrams Now in High Resolution V8 and Cab and Cab and Chassis |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|