Discontinued??? 72 Chevy Fleetside model? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72chevyLWB · 07-18-2002, 08:28 PM

I went to order one and they said check back next week. So I went back and they said its discontinued because they couldn't get one. Is this true? Does somebody have one they would sell?

*Gee_Emm* · 07-18-2002, 08:36 PM

Like one of these?

Check the net they are out there, or ebay.

Longhorn Man · 07-18-2002, 09:51 PM

It's been out a while now...since 97 or 98...something like that anyways.
I thought it was a rather crappy mold, and gave up on it 1/2 way through.
Not up to there normal standards.

Bill72BB · 07-19-2002, 01:36 AM

Try this link I got 3 from him awhile back.
http://members.aol.com/jftully/fjs/

Bill

70c10 · 07-19-2002, 07:50 AM

GEE EMM,
Where did you get that 70' model?

Edmond · 07-19-2002, 08:38 AM

I found one at http://www.wellydiecast.com/
The doors look a bit silly, but at least there is one available...

Cya,
Edmond

toms68cst · 07-19-2002, 08:43 AM

I've got one of those 72 AMT models. The quality is pretty good IMO. If you watch ebay you'll find one in the $20-$25 range

big.l.a · 07-19-2002, 09:08 AM

You can fine them In Wal-mart and K-mart.

lukecp · 07-19-2002, 01:06 PM

I have to agree with longhornmail on this one, the '72 "Fleetside" model wasn't all that great. It must have been a older model, it was not very detailed at all. I think it had about 80 pieces. If you are just getting into the hobby, it is a great beginning model though.
Also, i have been looking for one for quite some time, at Wal-Mart, as well as several hobby stores, and i haven't been able to find one. I haven't seen one for sale in 3 or 4 years.

*Gee_Emm* · 07-19-2002, 03:46 PM

It is a 69 model, stamped steel

http://www.kjclassic.com/kj-page3.htm

72chevyLWB · 07-19-2002, 07:10 PM

I have one of them I did a few years back. I want another so I can make it like my truck.

Edmond · 07-20-2002, 05:25 PM

I just bought one thru Ebay

http://cgi.ebay.com/ws/eBayISAPI.dll...DME:B:EOA:US:2

Cya,
Edmond

07-18-2002, 08:28 PM	#1
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	Discontinued??? 72 Chevy Fleetside model? I went to order one and they said check back next week. So I went back and they said its discontinued because they couldn't get one. Is this true? Does somebody have one they would sell? __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

07-19-2002, 01:36 AM	#4
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	Try this link I got 3 from him awhile back. http://members.aol.com/jftully/fjs/ Bill __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

07-19-2002, 07:50 AM	#5
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	GEE EMM, Where did you get that 70' model? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

07-19-2002, 08:38 AM	#6
Edmond Registered User Join Date: Jan 2000 Location: The Netherlands Posts: 1,063	I found one at http://www.wellydiecast.com/ The doors look a bit silly, but at least there is one available... Cya, Edmond __________________ 1971 Chevy C/20 Longhorn, 350/TH400, Edelbrock Performer, IMPCO 425 LPG Carb 1974 Chevy Camaro Z28 (Original) ------------------------- The Netherlands Last edited by Edmond; 07-19-2002 at 08:41 AM.

07-19-2002, 08:43 AM	#7
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,293	I've got one of those 72 AMT models. The quality is pretty good IMO. If you watch ebay you'll find one in the $20-$25 range __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

07-18-2002, 08:36 PM	#2
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Like one of these? Check the net they are out there, or ebay.

07-18-2002, 09:51 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	It's been out a while now...since 97 or 98...something like that anyways. I thought it was a rather crappy mold, and gave up on it 1/2 way through. Not up to there normal standards.

07-19-2002, 09:08 AM	#8
big.l.a Registered User Join Date: Jan 2002 Location: Allen, TX. USA Posts: 210	Model Truck You can fine them In Wal-mart and K-mart. __________________ 71 C10 LWB With Edelbrock 7101& 1406 Carb Accel HEI Blue Print Accel 8.8 Wires Soon to have possi & 186 Camel hump heads Dropped 2-1/2F&4R Dynomax Headers Duals Flowtech Aftburners Tonneau Cover Frm 89 F150 79 Monte C

07-19-2002, 01:06 PM	#9
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	I have to agree with longhornmail on this one, the '72 "Fleetside" model wasn't all that great. It must have been a older model, it was not very detailed at all. I think it had about 80 pieces. If you are just getting into the hobby, it is a great beginning model though. Also, i have been looking for one for quite some time, at Wal-Mart, as well as several hobby stores, and i haven't been able to find one. I haven't seen one for sale in 3 or 4 years. __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

07-19-2002, 03:46 PM	#10
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	It is a 69 model, stamped steel http://www.kjclassic.com/kj-page3.htm

07-19-2002, 07:10 PM	#11
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	I have one of them I did a few years back. I want another so I can make it like my truck. __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

07-20-2002, 05:25 PM	#12
Edmond Registered User Join Date: Jan 2000 Location: The Netherlands Posts: 1,063	I just bought one thru Ebay http://cgi.ebay.com/ws/eBayISAPI.dll...DME:B:EOA:US:2 Cya, Edmond __________________ 1971 Chevy C/20 Longhorn, 350/TH400, Edelbrock Performer, IMPCO 425 LPG Carb 1974 Chevy Camaro Z28 (Original) ------------------------- The Netherlands

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.