FS: One ton dually parts truck in Okla - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RicksTrucks · 02-04-2006, 01:24 AM

I have a 72 one ton parts truck. Let me know what you want off of it. Cab is pretty much shot except for the outer roof area. For starters:

Raised roof lites, tell me how much of the roof you want with them and I will cut them off and ship. Some of the lites are intact. $50 OBO + shipping.

**special-K** · 02-04-2006, 08:36 AM

That door looks decent.

kndall · 02-04-2006, 08:43 AM

How much for the shrub??

RicksTrucks · 02-04-2006, 08:15 PM

Quote:

Originally Posted by special-K

That door looks decent.

Doors are rusted at the bottom on the inside. Cab roof inside has some rust, so the cab is shot.

Here are some additional pics I took today.

**special-K** · 02-04-2006, 11:59 PM

I`ve seen doors like that before.Isn`t it funny the inside can rot and the outside still is solid?I saw it on original paint Suburban doors in a junkyard.Got ready to buy then until I opened them up.TTT

RicksTrucks · 02-05-2006, 09:52 AM

Quote:

Originally Posted by special-K

I`ve seen doors like that before.Isn`t it funny the inside can rot and the outside still is solid?I saw it on original paint Suburban doors in a junkyard.Got ready to buy then until I opened them up.TTT

The driver's door is not bad, just a rust through on the lower inside front corner, could be patched easily and a little dent on the outside where one of the mirror brackets was attached. The passenger door bottom inside is bad because whatever made a nest with the seat had stuff piled against the door (along with a folded up tarp) so it held moisture (since the windshield is gone), otherwise the rest of the door is fine - especiall the outside. So all that was salvageable was the handles and glass and door insides.

Robert1970C20rstbukt · 02-05-2006, 05:35 PM

I might be interested in the wiring harness for the cab lights if nobody buys the roof section.

Litdave · 02-08-2006, 10:06 PM

Is the rolling frame any good?

RicksTrucks · 02-09-2006, 01:47 AM

as far as I can tell it is. just surface rust. been sitting for about 10 years, but looks solid. I can get more pics if you need them. it still has the 4 speed, but I am thinking about taking it out and seeing if I can use it.

MDC · 02-09-2006, 02:20 AM

Does it have a swaybar?

RicksTrucks · 02-09-2006, 02:26 AM

Don't remember if it has a sway bar or not. Will have to go and look. Here is the only picture that I have of the front. Not sure if you can tell from this or not.

woodridge · 02-09-2006, 03:22 AM

How about the booster, surface rust or rust through? Is it a chev or gmc?

RicksTrucks · 02-09-2006, 11:05 AM

Quote:

Originally Posted by woodridge

How about the booster, surface rust or rust through? Is it a chev or gmc?

Surface rust. Don't know how many of the 10 years the hood was off, so nothing I would want to take a chance on myself unless someone wanted it for core.

MDC · 02-09-2006, 01:55 PM

Can't tell about the bar from the pic. Would you mind looking? PM sent

RicksTrucks · 02-09-2006, 02:05 PM

Quote:

Originally Posted by MDC

Can't tell about the bar from the pic. Would you mind looking? PM sent

Heading to California Monday, but should be able to go take another pic before I leave and will post.

3qtrtontarrer · 02-09-2006, 06:18 PM

I Want The Rear Helper Springs, Overiders , How Much

RicksTrucks · 02-09-2006, 06:44 PM

Quote:

Originally Posted by 3qtrtontarrer

I Want The Rear Helper Springs, Overiders , How Much

Looking at my picture tell me exactly what you want and if you know how they are removed. Another words, how hard to remove. If no one wants the whole frame, then you are in line for this.

RicksTrucks · 03-08-2006, 03:06 PM

ttt

Huskerboy2 · 03-08-2006, 04:13 PM

p.m. sent Rick.

truckless · 03-08-2006, 05:22 PM

How much for the rolling chassis?

RicksTrucks · 03-08-2006, 05:25 PM

Quote:

Originally Posted by truckless

How much for the rolling chassis?

Are you just wanting the frame and below? I may have parts of the cab sold, so all that would be left is below the cab.

truckless · 03-08-2006, 05:50 PM

Yes, frame and below.

RicksTrucks · 03-08-2006, 05:53 PM

Where in Texas are you? Does $100 sound right to you? Call me if you want to talk. PM'd you my phone number.

woodridge · 03-08-2006, 06:21 PM

Rick, I can't tell from the pic's if it is a chev or gmc, if it's a gmc is the title available.

RicksTrucks · 03-08-2006, 06:26 PM

Quote:

Originally Posted by woodridge

Rick, I can't tell from the pic's if it is a chev or gmc, if it's a gmc is the title available.

It is a chevy. The previous owner didn't have the title, but I am sure he could get it if the cost to do so was covered.

Right now parts of the cab are spoken for, but enough would be left to go with a title. There is also interest in the rolling frame. So if you want something let me know soon.

02-04-2006, 01:24 AM	#1
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	FS: One ton dually parts truck in Okla I have a 72 one ton parts truck. Let me know what you want off of it. Cab is pretty much shot except for the outer roof area. For starters: Raised roof lites, tell me how much of the roof you want with them and I will cut them off and ship. Some of the lites are intact. $50 OBO + shipping. Attached Images __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4 Last edited by RicksTrucks; 02-06-2006 at 05:08 PM.

02-04-2006, 08:36 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: FS: One ton dually parts truck in Okla That door looks decent. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-04-2006, 08:43 AM	#3
kndall Registered User Join Date: Nov 2004 Location: Moore, OK..73160 Posts: 207	Re: FS: One ton dually parts truck in Okla How much for the shrub?? Last edited by kndall; 02-04-2006 at 08:44 AM.

02-04-2006, 11:59 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: FS: One ton dually parts truck in Okla I`ve seen doors like that before.Isn`t it funny the inside can rot and the outside still is solid?I saw it on original paint Suburban doors in a junkyard.Got ready to buy then until I opened them up.TTT __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-05-2006, 05:35 PM	#7
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Re: FS: One ton dually parts truck in Okla I might be interested in the wiring harness for the cab lights if nobody buys the roof section. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

02-08-2006, 10:06 PM	#8
Litdave Registered User Join Date: Feb 2002 Location: Tullahoma, TN Posts: 203	Re: FS: One ton dually parts truck in Okla Is the rolling frame any good? __________________ 71 Factory SWB 4x4 Project 383/350/205 69 LWB 2wd CST Daily Driver ZZ4/700r4/3.73 72 SWB Future Hot Rod

02-09-2006, 01:47 AM	#9
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: FS: One ton dually parts truck in Okla as far as I can tell it is. just surface rust. been sitting for about 10 years, but looks solid. I can get more pics if you need them. it still has the 4 speed, but I am thinking about taking it out and seeing if I can use it. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

02-09-2006, 02:20 AM	#10
MDC Registered User Join Date: Oct 2005 Location: N Texas Posts: 727	Re: FS: One ton dually parts truck in Okla Does it have a swaybar? __________________ 67 C10 Shortbed 327 05 F150 4x4 NO APPOLOGIES 's 02 Xpress X19 02 Yamaha VMax 150 www.xpressboats.com Nothing says 'poor craftmanship' like wrinkles in your duct tape

02-09-2006, 02:26 AM	#11
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: FS: One ton dually parts truck in Okla Don't remember if it has a sway bar or not. Will have to go and look. Here is the only picture that I have of the front. Not sure if you can tell from this or not. Attached Images __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

02-09-2006, 03:22 AM	#12
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: FS: One ton dually parts truck in Okla How about the booster, surface rust or rust through? Is it a chev or gmc? __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet Last edited by woodridge; 02-09-2006 at 03:24 AM.

02-09-2006, 01:55 PM	#14
MDC Registered User Join Date: Oct 2005 Location: N Texas Posts: 727	Re: FS: One ton dually parts truck in Okla Can't tell about the bar from the pic. Would you mind looking? PM sent __________________ 67 C10 Shortbed 327 05 F150 4x4 NO APPOLOGIES 's 02 Xpress X19 02 Yamaha VMax 150 www.xpressboats.com Nothing says 'poor craftmanship' like wrinkles in your duct tape

02-09-2006, 06:18 PM	#16
3qtrtontarrer Registered User Join Date: Oct 2005 Location: NH Posts: 93	Re: FS: One ton dually parts truck in Okla I Want The Rear Helper Springs, Overiders , How Much

03-08-2006, 03:06 PM	#18
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: FS: One ton dually parts truck in Okla ttt __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

03-08-2006, 04:13 PM	#19
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: FS: One ton dually parts truck in Okla p.m. sent Rick. __________________ '72 Chevy Blazer

03-08-2006, 05:22 PM	#20
truckless Registered User Join Date: Jul 2005 Location: texas Posts: 3	Re: FS: One ton dually parts truck in Okla How much for the rolling chassis?



Register or Log In To remove these advertisements.

03-08-2006, 05:50 PM	#22
truckless Registered User Join Date: Jul 2005 Location: texas Posts: 3	Re: FS: One ton dually parts truck in Okla Yes, frame and below.

03-08-2006, 05:53 PM	#23
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: FS: One ton dually parts truck in Okla Where in Texas are you? Does $100 sound right to you? Call me if you want to talk. PM'd you my phone number. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

03-08-2006, 06:21 PM	#24
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: FS: One ton dually parts truck in Okla Rick, I can't tell from the pic's if it is a chev or gmc, if it's a gmc is the title available. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.