|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-26-2006, 02:01 PM
|
#1 |
|
chevelito
Join Date: Jun 2001
Location: Honolulu, HI USA
Posts: 1,609
|
Spacer size to run w/disc brak conversion.
Hi guys,
For those that have changed from drum to disc brakes, what size wheel spacer do I use to run the stock rims and clear the brake caliper? I got the Mcgaughy drop spindle disc brake kit. tia, Jay I have this type of rim:
__________________
New deadline...when my son can drive.  Aloha from Honolulu, HI |
|
|
|
02-26-2006, 02:47 PM
|
#2 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: Spacer size to run w/disc brak conversion.
I know 4X4 wheels will clear. Personally, I'd seek out proper wheels rather than use spacers. your state inspection is rather crazy over there and if they saw the spacers, you are sure to fail.
Last edited by Longhorn Man; 02-26-2006 at 06:31 PM. |
|
|
|
|
02-26-2006, 03:31 PM
|
#3 |
|
Senior Member
 
Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,798
|
Re: Spacer size to run w/disc brak conversion.
I had to run a 1" spacer on a 66 1/2 ton with 66 stock wheels. This will leave your rear wheels narrower that takes about 1.5 " on each side to even out depending on your year.
Last edited by dennislbrooks; 02-26-2006 at 03:33 PM. |
|
|
|
|
02-26-2006, 05:30 PM
|
#4 |
|
Senior Member
Join Date: Jul 2004
Location: Round Rock, Texas
Posts: 858
|
Re: Spacer size to run w/disc brak conversion.
I used 5/8" spacers on my '69 when I switched from drums to ECE discs.
__________________
Hook'em |
|
|
|
|
03-14-2006, 03:23 AM
|
#5 | |
|
chevelito
Join Date: Jun 2001
Location: Honolulu, HI USA
Posts: 1,609
|
Re: Spacer size to run w/disc brak conversion.
Quote:
Where'd you get them? Thanks, jay
__________________
New deadline...when my son can drive. Aloha from Honolulu, HI |
|
|
|
|
|
03-14-2006, 10:16 AM
|
#6 |
|
Senior Member
Join Date: Jul 2004
Location: Round Rock, Texas
Posts: 858
|
Re: Spacer size to run w/disc brak conversion.
Mine came from Pep Boys, but you can find them online.
__________________
Hook'em |
|
|
|
|
03-14-2006, 01:03 PM
|
#7 |
|
Registered User
Join Date: Oct 2002
Location: Portland OR.
Posts: 86
|
Re: Spacer size to run w/disc brak conversion.
I was giving a site off of Ebay but I found them a little cheaper on this site http://www.ezaccessory.com/SearchRes...ularity&Page=2
__________________
68 Chevy short wide air cab 4/6 on the drop 327 small block Front disc Frame "c" sectioned Gaylord bed cover Last edited by riden2low; 03-14-2006 at 01:05 PM. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
