What headers fit our trucks? 67-72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevydog66 · 03-01-2006, 12:07 PM

I have a 72 GMC 1500 2wd 350 sbc , and I have a set of rusty Mr. Gasket full length headers that fit perfectly, but I purchased a set of Flowtech Ceramic coated full length headers that are suppose to fit 67-81 trucks, but they don't fit. Which ones fit well? Part #'s too please. Thanks!!

70rs/ss · 03-01-2006, 12:29 PM

I used a set of Hooker Comps, for my BBC. If you call up Summit and give them your year they can get the part #. You may want to check the location of your motor, as there are two mounting locations for the motor. If you look at the frame you will see holes around the frame part of the motor mount and location of the motor will effect the headers fitment. Where are your's hitting? I have found that out of the box headers usually need some convincing to fit properly.

chevydog66 · 03-01-2006, 12:38 PM

The #1 and #2 primary tubes are hitting the motor mount bracket that comes off the frame rail. I guess that would be the motor mount tower. It is touching about 1" inside the frame rail on both sides. I cant get thefront part of the header to come down enough to get the bolts started. I put some big dents in them already on the bottoms of the #1 and #2 tubes. Will I have to pull the motor and move it forward or back?

03-01-2006, 12:38 PM	#3
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: What headers fit our trucks? 67-72 The #1 and #2 primary tubes are hitting the motor mount bracket that comes off the frame rail. I guess that would be the motor mount tower. It is touching about 1" inside the frame rail on both sides. I cant get thefront part of the header to come down enough to get the bolts started. I put some big dents in them already on the bottoms of the #1 and #2 tubes. Will I have to pull the motor and move it forward or back? __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-01-2006, 12:07 PM	#1
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	What headers fit our trucks? 67-72 I have a 72 GMC 1500 2wd 350 sbc , and I have a set of rusty Mr. Gasket full length headers that fit perfectly, but I purchased a set of Flowtech Ceramic coated full length headers that are suppose to fit 67-81 trucks, but they don't fit. Which ones fit well? Part #'s too please. Thanks!! __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up Last edited by chevydog66; 03-01-2006 at 12:11 PM.

03-01-2006, 12:29 PM	#2
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: What headers fit our trucks? 67-72 I used a set of Hooker Comps, for my BBC. If you call up Summit and give them your year they can get the part #. You may want to check the location of your motor, as there are two mounting locations for the motor. If you look at the frame you will see holes around the frame part of the motor mount and location of the motor will effect the headers fitment. Where are your's hitting? I have found that out of the box headers usually need some convincing to fit properly. Last edited by 70rs/ss; 03-01-2006 at 12:29 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.