|
03-21-2006, 10:27 AM
|
#1 |
|
Registered User
Join Date: May 2000
Location: Storm Lake, Ia
Posts: 1,449
|
Heads question
Will #882 heads from a 1975 have the right front bolt holes for a 72 application as far as the alternator mounting
Anything else that might cause me problems?
__________________
Last edited by Solver; 03-21-2006 at 10:27 AM. |
|
|
|
03-21-2006, 10:37 AM
|
#2 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: Heads question
Yup, you are good to go
 The only problems I can see , are using the large chamber heads on a 305 or 307(lower compresssion).....on a 327 or 350, should be no problem.  L
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
