![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2002
Location: New Mexico
Posts: 32
|
Good way to lower
What would be the best way for me to lower my rear end of my 1969 longbed. I really dont want it to look like a stink bug any more so what would be the best way to lower it about 2" or so just to get the stink bug look from it and i really was thinking on just cutting the coils. So what do you guys think.
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2001
Location: escondido, ca 92026
Posts: 1,222
|
It'll ride much better if you install 2" dropped coils vs. cutting...
__________________
'72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA 72 Stepside Project |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2000
Location: Frankfort, Kentucky, USA
Posts: 2,163
|
You said you just want to lower the rear of your truck? Because the springs have pig tails on each end, cutting the springs would take alot more work. I would either buy or make some 2 inch lowering blocks to put between the trailing arm and rear end. To make sure this would work alright, whats your rear tire diameter?
__________________
'69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
|
cutting the rears arent like cutting the front you should get the ends re twisted,but i think id go with blocks,or drop spring or the ultimate el cheapo way el torcho get them hot,real hot.
|
![]() |
![]() |
![]() |
#5 |
Almost Satisfied
![]() Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,932
|
I will have some 2" blocks available in the near future if you are interested. I am buying new springs and will not need the blocks. If you are wanting to do something right away I can't help, but let me know.
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far." |
![]() |
![]() |
![]() |
#6 |
Now the others dig........
![]() Join Date: May 2002
Location: San Antonio, TX
Posts: 1,520
|
How easy is it to remove and replace the coils???I'm thinking of lowering my rear also.....actually, my parts truck has lower rear coils than my project, so I was thinking of switching them. Could shocks make a difference in the rear ride height?????I have coil shocks on my truck, and regular gas shocks on my parts truck.
Is torching the rear springs a good idea, is that a good way to do it???? I can get a torch.... ![]()
__________________
68 Chevy C10 Stepside Black Primer 78 GMC Longbed White 09 Chevy Silverado Shortbed Granite Blue LOOKING FOR A 67 4 DOOR IMPALA!!! ![]() MEMBER OF THE DRUM BRAKE CLUB Bachelor of Music in Jazz Studies Texas State University-San Marcos, TX Certified Music Educator I hope Mom is up there watching and being my Guardian Angel "I've got a fever.....and the only prescription.....IS MORE COW BELL" -The Legendary: Bruce Dickenson "F#$@ 'em up!!!!!!" -The Legendary: Rogelio Escobar ![]() TRUCKY LINKS http://67-72chevytrucks.com/vboard/s...d.php?t=457750 http://67-72chevytrucks.com/vboard/s...d.php?t=461184 http://67-72chevytrucks.com/vboard/s...d.php?t=472848 http://67-72chevytrucks.com/vboard/s...d.php?t=417541 http://67-72chevytrucks.com/vboard/s...d.php?t=477788 Last edited by SWINGSAX68; 07-25-2002 at 01:28 PM. |
![]() |
![]() |
![]() |
#7 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
in a word....NO, heating springs to drop is not a good idea. heating destroys the temper of the spring........Al
|
![]() |
![]() |
![]() |
#8 |
Unregistered User
![]() Join Date: Dec 2001
Location: Houston, TX USA
Posts: 538
|
It's really easy to swap the rear springs (provided you can free the nuts on the spring retainer bolts), and you can get a new set of drop coils for around $115 or less.
Just remove the shock, support the trailing arm with a floor jack, and remove the retainer bolts. I did break one of my top retainer bolts, so prepare to have to replace some. I've heard some guys have had to cut them off, but I didn't have that much trouble. If I was going to do it again, I'd have new hardware ready to put on.
__________________
71 SWB Stepside SB400/TH350 |
![]() |
![]() |
![]() |
#9 |
Now the others dig........
![]() Join Date: May 2002
Location: San Antonio, TX
Posts: 1,520
|
...
I don't recall what the setup looks like right now, but where would I be able to buy these bolts and stuff to replace them......which I plan on doing anyways. Do they have them at auto parts stores?????
__________________
68 Chevy C10 Stepside Black Primer 78 GMC Longbed White 09 Chevy Silverado Shortbed Granite Blue LOOKING FOR A 67 4 DOOR IMPALA!!! ![]() MEMBER OF THE DRUM BRAKE CLUB Bachelor of Music in Jazz Studies Texas State University-San Marcos, TX Certified Music Educator I hope Mom is up there watching and being my Guardian Angel "I've got a fever.....and the only prescription.....IS MORE COW BELL" -The Legendary: Bruce Dickenson "F#$@ 'em up!!!!!!" -The Legendary: Rogelio Escobar ![]() TRUCKY LINKS http://67-72chevytrucks.com/vboard/s...d.php?t=457750 http://67-72chevytrucks.com/vboard/s...d.php?t=461184 http://67-72chevytrucks.com/vboard/s...d.php?t=472848 http://67-72chevytrucks.com/vboard/s...d.php?t=417541 http://67-72chevytrucks.com/vboard/s...d.php?t=477788 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|