Transmission Cooler Installed! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

iamthor · 03-29-2006, 12:20 AM

Here it is. 3/4 Aluminum Tube. I used the factory holes with the welded on nuts (what are those for anyways???). I drilled the Bottom tube and made a "?" shaped brackets on the top since it sat 1 inch higher than the factory hole. Since I am not running a fan on the cooler I was able to leave the X bars in place. The cooler has about 1-inch clearance in front and back. Sounds like I did the same thing as Derail.

derail · 03-29-2006, 03:02 AM

Very nice! That was exactly what I was talking about and looks almost the exact same as mine. I guess "Great minds think alike."

03-29-2006, 12:20 AM	#1
iamthor Registered User Join Date: Nov 2005 Location: San Jose, CA Posts: 54	Transmission Cooler Installed! Here it is. 3/4 Aluminum Tube. I used the factory holes with the welded on nuts (what are those for anyways???). I drilled the Bottom tube and made a "?" shaped brackets on the top since it sat 1 inch higher than the factory hole. Since I am not running a fan on the cooler I was able to leave the X bars in place. The cooler has about 1-inch clearance in front and back. Sounds like I did the same thing as Derail. Attached Images __________________ Rollin in my 64....GMC Suburban

03-29-2006, 03:02 AM	#2
derail Registered User Join Date: Sep 2005 Location: redding,ca. Posts: 182	Re: Transmission Cooler Installed! Very nice! That was exactly what I was talking about and looks almost the exact same as mine. I guess "Great minds think alike."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.