Floor shift Tilt Blow-up Diagram - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bob Moore · 03-31-2006, 02:29 PM

I am looking for a blow-up diagram for a 4speed or floor shift tilt column. Somebody recently posted a very nice blow-up of the automatic tilt. I know there are some differences in particular at the bottom of the column. I am also looking for a picture of the lower end of a 4speed tilt.

Thanks - Bob

red71cheyenne · 03-31-2006, 03:50 PM

Don't have one, but I'm interested too. Converting a van tilt to floor shift. TTT.

**dennislbrooks** · 03-31-2006, 03:58 PM

maybe not what you are after.

http://67-72chevytrucks.com/vboard/s...d.php?t=181811

red71cheyenne · 03-31-2006, 04:14 PM

Dennis, did you just grind off the shift arm at the bottom? Thats what I did to my non-tilt 3 spd. Jeff.

sneakysnake · 03-31-2006, 04:38 PM

this has a lot of info but not sure if it has exactly what your looking for. I browsed around but your request is not the norm.
http://www.autozone.com/servlet/UiBr...pair_guide.jsp

**dennislbrooks** · 03-31-2006, 05:42 PM

red71 cheyenne -- I cut it off with a sawzall smoothed the edges and then tack welded it to the outer case.

03-31-2006, 02:29 PM	#1
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Floor shift Tilt Blow-up Diagram I am looking for a blow-up diagram for a 4speed or floor shift tilt column. Somebody recently posted a very nice blow-up of the automatic tilt. I know there are some differences in particular at the bottom of the column. I am also looking for a picture of the lower end of a 4speed tilt. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

03-31-2006, 03:50 PM	#2
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Floor shift Tilt Blow-up Diagram Don't have one, but I'm interested too. Converting a van tilt to floor shift. TTT. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

03-31-2006, 03:58 PM	#3
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,798	Re: Floor shift Tilt Blow-up Diagram maybe not what you are after. http://67-72chevytrucks.com/vboard/s...d.php?t=181811

03-31-2006, 04:14 PM	#4
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Floor shift Tilt Blow-up Diagram Dennis, did you just grind off the shift arm at the bottom? Thats what I did to my non-tilt 3 spd. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

03-31-2006, 04:38 PM	#5
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Re: Floor shift Tilt Blow-up Diagram this has a lot of info but not sure if it has exactly what your looking for. I browsed around but your request is not the norm. http://www.autozone.com/servlet/UiBr...pair_guide.jsp

03-31-2006, 05:42 PM	#6
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,798	Re: Floor shift Tilt Blow-up Diagram red71 cheyenne -- I cut it off with a sawzall smoothed the edges and then tack welded it to the outer case.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.