1967 K20 4x4 Cummins Diesel + Tilt Hood on ebay - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roger0080 · 05-30-2006, 10:34 PM

I know there was a long running diesel thread awhile ago, but I can't find it but here is an intresting one on ebay:

http://cgi.ebay.com/ebaymotors/1967-...QQcmdZViewItem

I like what they did for the instrument panel. I presume they are all electrial Dodge instruments?

-Roger

**Daubs** · 05-30-2006, 10:38 PM

That is very cool...but you would think he could have put in a new seat? Or cover at least?!! And what about floor mat?

**special-K** · 05-31-2006, 05:55 AM

I agree,especially for 25 BIG ones.I`d love to have that or do the same.The Dodge mirrors are a mistake,IMHO.And,there needs to be some kind of inner fenders to make it right.I really dig everything else about the truck.I imagine they had to transfer all the electronics over including the instrument panel for the speedo.I didn`t read the description,but if it`s a later EFI they needed to full cluster/sensor package.If it`s done right,I`d rather have that for $25,000 than a new truck.

oteixeira · 05-31-2006, 01:12 PM

One thing I wanted to point out. The original diesel thread was more about the 4BT you can find in the old Chevy box trucks. This looks more like a graft of the Dodge computer controlled 6BT. I would much rather have something that doesn't count on computers made by Dodge to run!

It does look cool tho.....

Orlando

JAKES 68GMC · 05-31-2006, 03:53 PM

Quote:

Originally Posted by special-K

I`d rather have that for $25,000 than a new truck.

Its a nice truck but for 25 grand, its alittle rough. Anyone notice fiberglass center hump? It's somewhat rough for the money.

**special-K** · 06-01-2006, 05:29 AM

I guess it`s un-completed.I just read the p.o. passed away.

rambler · 06-01-2006, 11:42 AM

looks pretty cool,, seems like all the hard work is done, clean and simple looking... would love to drive it.(couldn't afford it!)

4x4Poet · 06-03-2006, 04:10 AM

Interesting intercooler arrangement. I wish I could see it in person to get ideas. The unfinished look leaves lots of room for personal customization. It doesn't seem to have been butchered at all in the process of stuffing the CTD in there.

**special-K** · 06-03-2006, 04:59 AM

Teah,I wonder how well it all works "stacked" like that.I`m with you,Poet.I`d love to get an up close look at the whole job.Looks well done,alot of work.I get the idea it hasn`t seen any use yet.Could be some bugs to work out.

67_C-30 · 06-06-2006, 11:52 PM

Quote:

Originally Posted by special-K

Teah,I wonder how well it all works "stacked" like that.I`m with you,Poet.I`d love to get an up close look at the whole job.Looks well done,alot of work.I get the idea it hasn`t seen any use yet.Could be some bugs to work out.

Isn't that the way the Dodge CTD trucks come?

sdkid · 06-07-2006, 11:15 AM

Quote:

Originally Posted by oteixeira

I would much rather have something that doesn't count on computers made by Dodge to run!

It does look cool tho.....

Orlando

Thats a 12 valve though. It will run on its own. All mechanical fuel delivery and injection. It may have a computer, but its more there for cruise, speedo and such.

trailzen · 06-07-2006, 02:34 PM

I was going to mention that looks likre the same 12v I have in my 91 first year with the intercooler for dodge and it is a stand alone motor just 1 module for instruments which is why he robbed the guage packto make it easy

05-30-2006, 10:34 PM	#1
roger0080 Registered User Join Date: Nov 2000 Location: Carver County, Minnesota, USA Posts: 626	1967 K20 4x4 Cummins Diesel + Tilt Hood on ebay I know there was a long running diesel thread awhile ago, but I can't find it but here is an intresting one on ebay: http://cgi.ebay.com/ebaymotors/1967-...QQcmdZViewItem I like what they did for the instrument panel. I presume they are all electrial Dodge instruments? -Roger Attached Images __________________ 72 Chev C-10 90% restored (former AZ truck) ... 71 Chev K-20 Cheyenne my vacation crusier... 72 Chev C-10 Now retired and striped after many faithful miles... 72 GMC 1500 Retired to the junk yard after bought new in '71...

05-30-2006, 10:38 PM	#2
Daubs Registered User Join Date: Jan 2005 Location: Eastern Nebraska Posts: 613	Re: 1967 K20 4x4 Cummins Diesel + Tilt Hood on ebay That is very cool...but you would think he could have put in a new seat? Or cover at least?!! And what about floor mat? __________________ '72 Chevy K-20 Crate 350, SM465, 4.10's

05-31-2006, 05:55 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1967 K20 4x4 Cummins Diesel + Tilt Hood on ebay I agree,especially for 25 BIG ones.I`d love to have that or do the same.The Dodge mirrors are a mistake,IMHO.And,there needs to be some kind of inner fenders to make it right.I really dig everything else about the truck.I imagine they had to transfer all the electronics over including the instrument panel for the speedo.I didn`t read the description,but if it`s a later EFI they needed to full cluster/sensor package.If it`s done right,I`d rather have that for $25,000 than a new truck. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-31-2006, 01:12 PM	#4
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Re: 1967 K20 4x4 Cummins Diesel + Tilt Hood on ebay One thing I wanted to point out. The original diesel thread was more about the 4BT you can find in the old Chevy box trucks. This looks more like a graft of the Dodge computer controlled 6BT. I would much rather have something that doesn't count on computers made by Dodge to run! It does look cool tho..... Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

06-01-2006, 05:29 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1967 K20 4x4 Cummins Diesel + Tilt Hood on ebay I guess it`s un-completed.I just read the p.o. passed away. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-01-2006, 11:42 AM	#7
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Re: 1967 K20 4x4 Cummins Diesel + Tilt Hood on ebay looks pretty cool,, seems like all the hard work is done, clean and simple looking... would love to drive it.(couldn't afford it!) __________________ No matter where you are..... There you are... Buckaroo Banzi

06-03-2006, 04:10 AM	#8
4x4Poet Registered User Join Date: Nov 2004 Location: "Under Montana skies." Posts: 1,836	Re: 1967 K20 4x4 Cummins Diesel + Tilt Hood on ebay Interesting intercooler arrangement. I wish I could see it in person to get ideas. The unfinished look leaves lots of room for personal customization. It doesn't seem to have been butchered at all in the process of stuffing the CTD in there. __________________ '71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.

06-03-2006, 04:59 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1967 K20 4x4 Cummins Diesel + Tilt Hood on ebay Teah,I wonder how well it all works "stacked" like that.I`m with you,Poet.I`d love to get an up close look at the whole job.Looks well done,alot of work.I get the idea it hasn`t seen any use yet.Could be some bugs to work out. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-07-2006, 02:34 PM	#12
trailzen Registered User Join Date: Jan 2006 Location: Canada Posts: 71	Re: 1967 K20 4x4 Cummins Diesel + Tilt Hood on ebay I was going to mention that looks likre the same 12v I have in my 91 first year with the intercooler for dodge and it is a stand alone motor just 1 module for instruments which is why he robbed the guage packto make it easy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.