3 speed tranny linkage??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevy2wd · 07-19-2006, 02:07 PM

I was looking at my linkages from the tranny to the colum, is there different setups? Was 67-68 different,if so will they still work on a 69-72?

farside847 · 07-19-2006, 04:59 PM

I have only seen one type. Could be wrong, but I think they are all the same.

Green Machine · 07-19-2006, 10:10 PM

Only thing I can think of is that the linkages for the 6 bangers are longer than the ones for the V8's, due to the tranny sitting farther back.

67chevy2wd · 07-19-2006, 10:43 PM

Ok that makes sense now seeing how one set came out of a 69 pickup that had a I6 in it. Would anything else be different out of a I6 pickup?

Green Machine · 07-19-2006, 11:11 PM

I few I can think of quick, radiator is smaller, narrower, no fan shroud, just a guard, engine mount towers and manual tranny crossmember location in the frame, engine wiring harness, gas line from tank is also different because of pump location..

07-19-2006, 02:07 PM	#1
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	3 speed tranny linkage??? I was looking at my linkages from the tranny to the colum, is there different setups? Was 67-68 different,if so will they still work on a 69-72? __________________ 07 Chevy classic LBZ Duramax (a few mods) '67 Chevy 1/2 ton 2wd (in pieces) '69 Chevy 1/2 ton 2wd (on hold) '71 GMC 3/4 ton 4x4 ‘71 GMC 1/2 ton 2wd suburban

07-19-2006, 04:59 PM	#2
farside847 Registered User Join Date: Feb 2005 Location: Bay Area, California Posts: 995	Re: 3 speed tranny linkage??? I have only seen one type. Could be wrong, but I think they are all the same. __________________ 1971 Chevy C10 Shortbed Stepside, 307v8 3-on-the-tree

07-19-2006, 10:10 PM	#3
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: 3 speed tranny linkage??? Only thing I can think of is that the linkages for the 6 bangers are longer than the ones for the V8's, due to the tranny sitting farther back. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

07-19-2006, 10:43 PM	#4
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	Re: 3 speed tranny linkage??? Ok that makes sense now seeing how one set came out of a 69 pickup that had a I6 in it. Would anything else be different out of a I6 pickup? __________________ 07 Chevy classic LBZ Duramax (a few mods) '67 Chevy 1/2 ton 2wd (in pieces) '69 Chevy 1/2 ton 2wd (on hold) '71 GMC 3/4 ton 4x4 ‘71 GMC 1/2 ton 2wd suburban

07-19-2006, 11:11 PM	#5
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: 3 speed tranny linkage??? I few I can think of quick, radiator is smaller, narrower, no fan shroud, just a guard, engine mount towers and manual tranny crossmember location in the frame, engine wiring harness, gas line from tank is also different because of pump location.. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.