Parts, Cab For sale

[oldgold70c10]

I've got a cab I'd like to get rid of here with lots of good metal in the firewall and floors. Pictures will show you. More pictures, if needed. Good firewall, except cutout area around clutch hole, good a-pillars, good passenger side kick panel (surface rust only.) Good inner rockers, floor pan good except for a hole on the driver's side and a small hole on passenger. Cab supports and outriggers good. Like I said, look at the pictures. I'd like this gone, and I won't cut up. $25 for the cab, pick up, or for an extra $45, I will deliver to the OKC, Enid or Tulsa areas

I also have good original windshield rubber, $10, or free if you come pick up cab, soft-ray tinted large rear window, real clear, $20 with original rubber in good shape. I also have a driver's side door, good for the door skin or lower patches only, it does have a few mirror holes, upper & lower trim in usable shape but no dents or rust holes, $15.

I would prefere local pick-ups, and can get pixs of door etc.

[Hart_Rod]

Would you be willing to cut off the air box on the passenger side and ship?

[oldgold70c10]

Would you be willing to cut off the air box on the passenger side and ship?

Sorry, I don't have any metal working tools for cutting, etc, other than a hacksaw, hence trying to sell it as is. Perhaps a board member nearby could help, if they needed some parts cut off too.

[Hart_Rod]

You could probably drill the spot welds out to get it off. I would be willing to give you $25 + shipping.