lowering again - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pkj · 07-31-2006, 01:45 PM

i have decided with this boards great imput to lower my 68 long fleet 3/5 i want to use 3/5 coils correct shocks and shock relocaters. will i have to change track bar? where is best place to purchase this combo or should i pc. it out. the truck wont be delivered untill this sunday. i want to put the 07 tahoe 20s on right away can anybody tell me how far to have the centers bored out. thanks

pkj · 07-31-2006, 05:06 PM

i want to take the wheels in as soon as possible so any help is highly appreciated. thanks again

BowTieMan · 07-31-2006, 05:57 PM

You will need spacers for those wheels. The offset is to much. I wouldn't run spacers. But if you want them bad do it.

70c10 · 08-01-2006, 07:43 AM

Our board vendors sell drop springs for about $100 pair. I got mine from GMCPaul. What are you planning to do with your old front springs?. I will be needing a set of small block stockers.

pkj · 08-01-2006, 10:44 AM

thanks brad. i like the idea of a new style oem wheel on a old truck. i wont use spacers but will have 6 lug to 6 lug adapters made i still want to mill out centers so i can mount wheels and measure for proper off-set. so if anybody knows bore diameter please help. jim thanks for info if i decide i dont want springs their yours for shipping thanks again.

07-31-2006, 01:45 PM	#1
pkj Senior Member Join Date: Jun 2006 Location: waycross ga. Posts: 438	lowering again i have decided with this boards great imput to lower my 68 long fleet 3/5 i want to use 3/5 coils correct shocks and shock relocaters. will i have to change track bar? where is best place to purchase this combo or should i pc. it out. the truck wont be delivered untill this sunday. i want to put the 07 tahoe 20s on right away can anybody tell me how far to have the centers bored out. thanks

07-31-2006, 05:06 PM	#2
pkj Senior Member Join Date: Jun 2006 Location: waycross ga. Posts: 438	Re: lowering again i want to take the wheels in as soon as possible so any help is highly appreciated. thanks again

07-31-2006, 05:57 PM	#3
BowTieMan Registered User Join Date: Dec 2003 Location: Glendale Arizona Posts: 747	Re: lowering again You will need spacers for those wheels. The offset is to much. I wouldn't run spacers. But if you want them bad do it. __________________ "A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo

08-01-2006, 07:43 AM	#4
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: lowering again Our board vendors sell drop springs for about $100 pair. I got mine from GMCPaul. What are you planning to do with your old front springs?. I will be needing a set of small block stockers. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

08-01-2006, 10:44 AM	#5
pkj Senior Member Join Date: Jun 2006 Location: waycross ga. Posts: 438	Re: lowering again thanks brad. i like the idea of a new style oem wheel on a old truck. i wont use spacers but will have 6 lug to 6 lug adapters made i still want to mill out centers so i can mount wheels and measure for proper off-set. so if anybody knows bore diameter please help. jim thanks for info if i decide i dont want springs their yours for shipping thanks again.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.