08-12-2006, 04:17 PM | #1 |
Registered User
Join Date: Feb 2006
Location: PA
Posts: 4
|
1984 block
Im New Here, Hi To Every one . Hope You Can Help. Ihave access to a 1984 school bus van 350 engine with less then 1000 miles on it.
need to no if this block will fit ok into a 1990 surburban with, i know ill need to do some mods, But any help would be appreciated |
08-12-2006, 11:23 PM | #2 |
Registered User
Join Date: Nov 2005
Location: Eagle Creek, Oregon
Posts: 6
|
Re: 1984 block
Hi Caleb..... welcome, the block will fit, but lots of mods, carbs went away in 87, lots of smog stuff.
|
08-13-2006, 05:36 PM | #3 |
Registered User
Join Date: Feb 2006
Location: PA
Posts: 4
|
Re: 1984 block
Yea I know iwill have to change intake, distributer, all pullys as mine has single serpintine belt , but can i use same heads and flywheel stuff like that,
my moters shot and i could not pass up this one for the price. Last edited by CalebT; 08-13-2006 at 07:44 PM. |
08-13-2006, 06:33 PM | #4 |
Registered User
Join Date: Dec 2004
Location: beulah,alabama
Posts: 1,075
|
Re: 1984 block
being a bus block is a good chance o be a four bolt main isnt it ?>
|
08-13-2006, 07:43 PM | #5 |
Registered User
Join Date: Feb 2006
Location: PA
Posts: 4
|
Re: 1984 block
the casting # 14010207 could be 2 or 4 is there an easy way to tell, got ot home today and pulled the intake off every thing looks nice and clean
|
08-14-2006, 01:20 AM | #6 |
junk collector
Join Date: Dec 2004
Location: above Baton Rouge, LA
Posts: 693
|
Re: 1984 block
make sure the starter will bolt to the block. Many school bus applications don't hav holes in the block to bolt on a starter since the bolt them to the trans.
__________________
'87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a |
02-23-2007, 09:47 AM | #7 |
Long Fleet Club
Join Date: Aug 2006
Location: Deer Park, TX
Posts: 5,666
|
Re: 1984 block
I know this is an old thread but I have the same casting # and it is a 4 bolt main.
__________________
Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|