![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Jul 2002
Location: northern IL.
Posts: 263
|
proportioning valve lines
Just to make sure, does the line that goes out the back of the pro value go to the rear brakes? Been a few years since I took the truck apart. Any pics of the lines along the frame would be helpful.
|
![]() |
![]() |
![]() |
#2 |
I'm watching you!
Join Date: Feb 2005
Location: Levittown, PA
Posts: 1,822
|
Re: proportioning valve lines
What year? Discs or 4 drums?
My 4 wheel drum is front to front and rear to rear. Mike
__________________
2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold ![]() |
![]() |
![]() |
![]() |
#3 |
chevy truck fan
Join Date: Mar 2005
Location: Gilbert, arizona 85298
Posts: 1,995
|
Re: proportioning valve lines
i believe that you are correct. i have a cpp prop valve for 4 whl discs & the line for the rear brakes connects to the prop valve at the "rear" connection by the booster. now if i could only get it to not leak!
hope this helps. rodstored-72 |
![]() |
![]() |
![]() |
#4 |
20' Daredevil (Ret)
![]() Join Date: May 2003
Location: Jefferson State
Posts: 13,667
|
Re: proportioning valve lines
On my stock '72 K20 (w/front discs).....
Front of MC to rear of prop. valve to rear brakes. Rear of MC to front of prop. valve to front brakes.
__________________
- Mike - 1972 K20 LWB 350/350/205 RIP El Jay |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jul 2002
Location: northern IL.
Posts: 263
|
Re: proportioning valve lines
hey stocker I was wonding if you could take a pic of that. thanks guys jeff
|
![]() |
![]() |
![]() |
#6 |
member #16
![]() Join Date: Dec 1999
Location: Yuba City Ca.
Posts: 3,618
|
Re: proportioning valve lines
Here is a pic of c-10 lines. 3/4 ton lines are as stocker describes.
__________________
john http://67-72chevytrucks.com/vboard/showgroups.php board vendors ![]() http://www.flickr.com/photos/1745471...7602865984234/ |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Jul 2002
Location: northern IL.
Posts: 263
|
Re: proportioning valve lines
thanks alot, I have the front and back of the MC mixed up.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|