![]() |
![]() |
#1 |
Post Whore
Join Date: Aug 2005
Location: Owensboro KY
Posts: 11,905
|
Body Parts
Ok I have a good rolling frame and I am ready to start on the body work on the truck, I haven't done any body work but I have a friend that is going to show me some pointers and help me out so I think I can do it. I am starting with the cab because that is about all that needs to be fixed. The cab needs new supports on the bottom (just the ones that run left to right) and both rockers and cab corners, I am assuming that I need to start with the cab supports and then the corners and last the rockers, is that the right order or should I go a different way with it? Also are there different brands for these parts or are they all made by the same people? If there are different brands which would you recommend? Thanks for all your help guys and I will get some pics here soon to show you guys what I am working with and how it looks after!
__________________
Drew '71 Chevy 350/TH350 Hugger Orange Currently just a rolling frame, body work soon to follow!!! Check out my Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=212927 Daily Driver: 1997 Chevrolet S-10 with more gears than pistons ![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: Body Parts
Check out EFABMAN's DVD as far as vendors check with some of the board vendors.......I think most of if not all the stuff is TRI-PLUS just reboxed depending on the suppliers
Last edited by qksilver; 09-07-2006 at 08:54 PM. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|