|
09-16-2006, 03:42 AM
|
#1 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Just a thought
Has anybody converted/perverted a 55-59 2 wheel into a 4 wheel using the stock frame, leaf springs and steering box.
My neighboor inherited a 58 panel and I have some 67-82 4X4 stuff |
|
|
|
09-18-2006, 11:07 PM
|
#2 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: Just a thought
Ttt
|
|
|
|
|
09-18-2006, 11:29 PM
|
#3 |
|
Registered User
Join Date: Nov 2003
Location: Texas
Posts: 183
|
Re: Just a thought
There was an article in Four Wheel Drive Magazine some years ago in which this conversion was done on a mid fiftys Chevy pickup If you use a "divorced transfer case is pretty much a bolt on . You would be pretty much doing what was done by GM on the old NAPCO trucks which were shipped from the factory with a front axel and transfer which were installed by the dealer
Gene |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
