![]() |
![]() |
#1 |
Registered User
Join Date: Dec 2004
Location: El paso, Tx.
Posts: 428
|
Hard brakes??
![]() ![]() Is this fluid suppose to be there? I replaced the brake master cylinder and the brakes are still stiff. In the case it Say's delco. It comes from a 72 Chevy c-10 and is on a 69 Chevy c-10. Does the brake master cylinder use a gasket where it meets the brake booster? I know it uses a grommet what im talking about is on the actuall mating surface. and if the grommet is a bit torn can this be cause for the hard brakes? It was like that on the 72 and it worked fine and I don't see why I would be having these problems now. Any input would be a appreciated. Thank you in advance.
__________________
1969 Chevy C-10 350/700r4 |
![]() |
![]() |
![]() |
#2 | |
Registered User
Join Date: Apr 2006
Location: oklahoma
Posts: 10,670
|
Re: Hard brakes??
Quote:
sounds like a defective master cylinder. Is it rebuilt? Where did it come from? My friend went thru a couple master cylinders on his 78 ford f250. The rebuilt cylinders he kept getting were pos. Problem was were auto zone parts, only place around at the time. I ahve seen some with a gasket around the flange and some dont. When I replaced mine I just put a thin bead of silicone to protect water from getting in there. Thats about all I can offer. Aaron |
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Dec 2004
Location: El paso, Tx.
Posts: 428
|
Re: Hard brakes??
Thank you for the quick reply an the master cylender is fro
autozone.I ll go and exchange it later on today. And follow the silicon tip while replacing it.
__________________
1969 Chevy C-10 350/700r4 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Dec 2004
Location: El paso, Tx.
Posts: 428
|
Re: Hard brakes??
What place do you guys recommend for the re built kit for the original master cylinder?? The bastards at auto zone don't carry them any more they only carry the rebuilt master cylinder.
__________________
1969 Chevy C-10 350/700r4 |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: Hard brakes??
parts america website had one I thought...
|
![]() |
![]() |
![]() |
#6 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Hard brakes??
your booster is probably junk too.
The brake fluid eats the rubber diaphram, and causes the hard pedal. No need for a gasket or sillicone, just bolt it on. |
![]() |
![]() |
![]() |
#7 | |
Registered User
Join Date: Apr 2006
Location: oklahoma
Posts: 10,670
|
Re: Hard brakes??
Quote:
Aaron |
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Dec 2004
Location: El paso, Tx.
Posts: 428
|
Re: Hard brakes??
Will have to get a new one . Is there a way to test to see of the booser works Like presurisind it or some thing similar?
__________________
1969 Chevy C-10 350/700r4 |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Feb 2006
Location: Oklahoma City
Posts: 588
|
Re: Hard brakes??
Vac guage. Put some vac to it and see if it holds it. Not to much though. It sounds to me like it is bad though, if there is a hard pedal. I would test it though, just so you don't spend extra money you don't need to.
__________________
1970 Chevy C10 "Under Construction" ![]() 2002 Chevy S10 V6 ![]() |
![]() |
![]() |
![]() |
#10 |
Black 72 Chevy
Join Date: May 2002
Location: Los Angeles, California
Posts: 662
|
Re: Hard brakes??
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|