![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Oct 2006
Location: paignton united kingdom
Posts: 50
|
gas conversion for c10
i based int he uk and was thinking of doing a autogas/lpg gas conversion to run my truck as fuel here is very expensive, dont know what your fuel cost but ours it about £5 a gallon which is roughly just over $9 a gallon plus i only get about 8 miles to the gallon, any views on this or if anyone has done the conversion
![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2006
Location: Republic of California
Posts: 345
|
Re: gas conversion for c10
I always find it amusing that on this side of the pond "gas" is short for gasoline. So we are already runninig "gas".
And most of us here probably aren't going to pick up some "fags" on the way home. ![]() Sorry for the diversion. I'm sure someone will chime in on your propane conversion. Bump.
__________________
'67 C10 Short Stepside 5.0TPI/700R4 |
![]() |
![]() |
![]() |
#3 |
Nothings as cool as my 72
Join Date: May 2005
Location: Edmonton, AB, Kanuckastan
Posts: 181
|
Re: gas conversion for c10
I'm asuming that you are talking about propane. I have also thought of doing this conversion too. There are some good and bad things about running a truck on propane. The price of propane is about half of what gasoline is. The conversion will cost around $1000. Propane also has a high octane rating, 100-110. So you could build a high a compression motor and burn cheap fuel. Some of the downs about propane is that it wears out your engine more. It burns at a hotter tempature then gasoline so your engine will wear quicker. One common problem is that valve seals wear out. So if your going to do this build a motor to run on propane or at least get your heads rebuilt. Propane isn't also as eficeint as gasoline. If you get 8 mpg now you'll probably get around 6 mpg with propane.
Check out www.gotpropane.com and also do a search on google.
__________________
1972 C10 Longbox In the middle of body off restoration Rebuilt 355, turbo 400, 3.42 12-bolt Rolling chassis finally done and cab mounted. Now onto sanding, bondo and more sanding. ![]() |
![]() |
![]() |
![]() |
#4 |
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,126
|
Re: gas conversion for c10
I'm not sure I agree with the wear statement. I know a guy that uses propane in a 90's suburban and had almost 300000 miles on the engine, went through 3 transmissions. He said it didn't use any oil either.
Gasoline can be hard on engines and valves because of all the byproducts in it that collect and cause hot spots, corrosion, and seal wear. In fact, before this, I've never heard anyone say that propane was harder on an engine than gas. That board member from Argentina had some knowledge of using LPG on these trucks. It was a common conversion down there. Also, check with your local LPG supplier. I'm sure they'd ;ove to help a prospective customer out. HG
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 ![]() 72 ![]() HG's Plow Truck '78 ![]() Bigass Farm Truck HG's thread of miscellaneous stuff |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Dec 2004
Location: Stephenville, Texas
Posts: 420
|
Re: gas conversion for c10
From what I understand Propane is supposed to be better on your engine extending its life. Back in the 70's a lot of trucks around here ran propane they make a automatic oil injection that will help the "drying" out of the valves in our trucks. I buy and sell some government vehicles that run propane. I have a 91 3/4 ton GMC now with tbi and propane and it seems to have about the same power on propane as gasoline.
Propane here with the taxes is not much cheaper than gasoline.
__________________
72 Super Cheyenne lwb 4X4 Ocra / White ![]() 88 Chevy 1 ton Dumptruck ![]() 88 Chevy 1ton Flat bed 4X4 white ![]() |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: gas conversion for c10
Next year I hope to convert my motor to E85. Oregon is building the largest E85 plant on the west coast, so it should be somewhat available in a year or 2. I would like to get off fosil fuel as soon as possible.
U.N. Says 2005 Set Greenhouse Gas Record |
![]() |
![]() |
![]() |
#7 | |
Registered User
Join Date: Oct 2006
Location: paignton united kingdom
Posts: 50
|
Re: gas conversion for c10
Quote:
|
|
![]() |
![]() |
![]() |
#8 |
laying low
![]() Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,662
|
Re: gas conversion for c10
Casey. From what little I know about propane engines is they do run much cleaner than gasoline. It's a more complete combustion. Take a propane engine apart after many miles and they are still really clean inside. Oil still looks a lot cleaner at time of changing it. A little less mile per gallon maybe but a well tuned engine can run a long time on LP gas. Sometimes inconvenient as LP gas not readily available like gasoline. Cost of conversion, price per gallon and availability will most likely be the deciding factors though.
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
![]() |
![]() |
![]() |
#9 |
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,126
|
Re: gas conversion for c10
Found this this morning:
http://wps.com/LPG/LPG-book-final.html DUAL FUEL SYSTEMS You have the choice of installing an LPG only or dual LPG/gasoline system. As you might guess, the dual-fuel setup is a compromise; you'll get maximum performance, simplicity and economy with the single fuel setup. That is what I chose. I talked to the owner of a 1970 GMC pickup who converted to dual fuel when the truck was new (181,000 miles, no motor overhaul yet) and says he runs mainly LPG, and gasoline when LPG isn't convenient. You may have trouble with the carburetor gaskets drying out and such; talk to the LPG equipment dealer for details. The GMC owner had no complaints, so maybe all that's overrated.
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 ![]() 72 ![]() HG's Plow Truck '78 ![]() Bigass Farm Truck HG's thread of miscellaneous stuff |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Oct 2006
Location: paignton united kingdom
Posts: 50
|
Re: gas conversion for c10
nearly all setups in uk are dual fuel and you can change between gasoline and propane at the flick of a switch, 90% of a fuel stations now have propane pumps, so is no different to getting gasoline, i have about 10 fuel stations all with a mile of me that sell propane, still not sure if i should go ahead a do it as the conversion is alot dearer here converts to about $2200
![]() |
![]() |
![]() |
![]() |
#11 |
Senior Member
![]() Join Date: Mar 2004
Location: Somewhere
Posts: 985
|
Re: gas conversion for c10
caseychoptop, why not have someone from the usa purchase one for you and ship it over? it would same you some bucks.
ondrew |
![]() |
![]() |
![]() |
#12 | |
Registered User
Join Date: Oct 2006
Location: paignton united kingdom
Posts: 50
|
Re: gas conversion for c10
Quote:
![]() |
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|