|
11-24-2006, 07:00 PM
|
#1 |
|
Registered User
Join Date: May 2003
Location: MOORE, OK
Posts: 146
|
fender
I Am Trying To Take Off The Right Fender, And I Took Out The Inner Fender And I See The Top Two Bolts On The Back Off The Fender And One On The Bottom. Where Is The Front Of The Fender Bolted? I Was Hoping To Leave The Grille And Stuff On. I Took The Two Top Grille Bolts In Front Of The Core Support Out. Any Help Is Appreciated!
|
|
|
|
11-24-2006, 07:09 PM
|
#2 |
|
Its a Truck Thing......
Join Date: Dec 2004
Location: Sierra Vista, Arizona
Posts: 3,179
|
Re: fender
The fender is bolted to the core support on the top inside 2 bolts and also 4 bolts with the front inside grill, after all the fender well bolts are out, there are 2 more at the top rear under the cowl, and 1 at the bottom rear by the rocker panel, I can send pics of all if you need....
Smitty
__________________
71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van" |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
