![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Mar 2003
Location: Asheville, N.C
Posts: 952
|
![]()
I'm adding a tach to my truck and need a picture of the firewall(origional location) that shows where the tach wire comes out of the firewall to the hei,so I know where to drill the 3/4" hole on the firewall? Thank you
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
Re: picture please-tach wire on firewall?
There is a series of dimples between the bulkhead connector and the E-brake cable hole as can be seen in the picture, (attached). The hole for the tach should be made using the dimple that is centered between the two larger holes.
Jim |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Mar 2003
Location: Asheville, N.C
Posts: 952
|
![]()
thank you very much for the picture.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|