Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
12-04-2006, 02:28 AM | #1 |
Registered User
Join Date: Jul 2006
Location: Fresno, Ca
Posts: 154
|
How To Flat Resto Rod/Pin Stripe
Over the years I've always liked the still in progress looks. I've always had respect for the guys that just do it. I'll admit in the past some of my cleaner trucks were ones that I bought near completion with some of my attitude mixed in. This time im restoring my 68 from the ground with my son Keanu and he like myself really like the the work in progress look similar to the RAT RODS. Ive seen a lot of the led sleds, 50 and early 60's trucks have that look out here in Cali. Even the guys that drive them fit the part totally 50's and 60's. Anyways thats what I wanted to know what paints or primers are used for that look. I'm not sure what it is but they seem to hold up pretty good and flat bases with pinstipping are just a clean look. I figured by doing this I won't be so worried about scratching it up and use the truck for it's intended for to haul cool things in the bed....my chopper, grill, cooler, big screen, christmas tree....etc just in case my wife reads it Any insight and pics would be appreciated
|
12-04-2006, 02:44 AM | #2 |
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: How To Flat Resto Rod/Pin Stripe
I know what you mean. I love the led sled looks as well. Here is a truck that has inspired mine. I know it's a '66, but the look is a lot like what I hope to reach some day.
If you read the tech articles about it, they get into the paints used for the satain finish. Last edited by jimmydean; 12-04-2006 at 02:45 AM. |
12-04-2006, 03:24 AM | #3 |
THE VILLIAGE IDIOT
Join Date: Nov 2006
Location: Tooele, Utah
Posts: 1,405
|
Re: How To Flat Resto Rod/Pin Stripe
i love the rat rod look,,hopefuly one dy i can build a real one..i love the clean look of the primer,,with old school pinstripping..nothing better,,plus if you scratch it,,no big deal..
billy
__________________
honestly honey,,i have no idea how that truck got here. |
12-04-2006, 06:24 AM | #4 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: How To Flat Resto Rod/Pin Stripe
I did mine in a semi-flat black Rustolium burchased in quarts. Primer will absorb water, rubs off after a couple years of washing, is kinda hard to lay down right, and is a B!TCH to clean.
|
12-04-2006, 07:43 AM | #5 |
Registered User
Join Date: Sep 2002
Location: DFW Texas
Posts: 2,270
|
Re: How To Flat Resto Rod/Pin Stripe
Mine was painted with regular 2 stage paint. They just added flattener to the clear. Gives it a suede or primer look with the durability of real paint.
|
12-04-2006, 11:22 AM | #6 |
Account Suspended
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
|
Re: How To Flat Resto Rod/Pin Stripe
John Deere Blitz Black ... cheap as primer, but better. Not as good as a flattening agent, but doesn't cost as much either.
|
12-04-2006, 12:55 PM | #7 |
Registered User
Join Date: Jul 2006
Location: Fresno, Ca
Posts: 154
|
Re: How To Flat Resto Rod/Pin Stripe
Guys thanks for the in put. Longhorn Man did you prep and shoot your own truck. Shane did you also shoot a truck with John Deer Blitz Black. Jimmy thanks for the pic. That is very much the look Im going for but a lil more trible and less flame...but my son loves the gost flame look and ive seen them done with flat base colors...
|
12-04-2006, 01:02 PM | #8 |
Registered User
Join Date: Jul 2006
Location: Fresno, Ca
Posts: 154
|
Re: How To Flat Resto Rod/Pin Stripe
Rat Rod 67 that is one clean look....
|
12-04-2006, 02:39 PM | #9 |
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: How To Flat Resto Rod/Pin Stripe
Take a look at the feature when they did the flames, it's a very cool article and the job they did is awesome. My daughter keeps telling me to do flames, so we will see.
I have thought about doing a "true-flame" paint job over a flat or satin black. When I was a kid, my brother had a '57 VW bug that was in primer and he learned to do flames in school. When he got home I helped him mask and shoot a sick hotrod style flame job over the primer, it was a great look. |
12-04-2006, 04:34 PM | #10 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: How To Flat Resto Rod/Pin Stripe
yep... I sure did. I do 99.9% of the work on my rig myself.
So far, mounting and ballancing tires, rebuilding the tranny, and welding the exhaust, are the only things I didn't do myself. Here's the link; http://67-72chevytrucks.com/vboard/s...d.php?t=214871 |
12-04-2006, 06:30 PM | #11 |
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: How To Flat Resto Rod/Pin Stripe
Hey Longhornman, your paint thread has inspired me to do mine with the John Deere Blitz Black this Spring (Thanks to Shane for the paint reference). I got a new (to me, thanks Brad) bedside last week that will be bolted on shortly, then I have some minor body work issues to handle. But the outside will be ready to prep and paint once the weather is above 60 at night. I don't have a shop, so mine will be painted in the driveway (covered, just not heated).
I might try to swing a few hours in a booth at a local shop, but I haven't tried that route yet. |
12-04-2006, 10:31 PM | #12 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: How To Flat Resto Rod/Pin Stripe
It's really not that hard... but you'll want to shoot your old junk bedside first to get the hang of it... esp if you've never sprayed before. The flat and semi-flat paints for the best part are more forgiving than real automotive paint. All you really have to do is watch for the tiger stripe effect... you'll know it if it happens.
|
12-05-2006, 01:51 AM | #13 |
Sinister Exaggerator
Join Date: Feb 2006
Location: Eugene, Oregon
Posts: 111
|
Re: How To Flat Resto Rod/Pin Stripe
This stuff looks like the best thing going. I've been planning on doing it for a year. Maybe I'll finally do it some time soon but if you are serious about the 'suede' look that is the stuff you want to use. unless you want to a two stage with a flattener it the clear.
__________________
69 c10 Chevy Long Fleet 350/350 *under construction* Poor man's disc brake upgrade with HydroBoost from '82 diesel Blazer tank with "John Fabris" stake pocket filler (Genius!) |
12-05-2006, 07:59 PM | #14 |
Registered User
Join Date: Dec 2000
Location: Ringtown,PA
Posts: 555
|
Re: How To Flat Resto Rod/Pin Stripe
did the primer thing a few years ago, loved the look but it faded and washed off real bad. did this 2 years ago, its dupont gloss black base coat with a splash of flattener to help stop the streaking affect (tiger striping). so far so good and its a deep black that hasn't faded or washed off at all. does not have a real smooth finish though due to no clear. i get tons of compliments on the color, just has the perfect sheen. Dev.
__________________
68 chevy 406 small block, budget drag racer, new best e.t 11.91 @112 67 nova numbers matching 327 4 speed 13.6 @ 102mph 70 longhorn c-30 402/4 speed 70 c-10 swb 402, muncie 4 speed 94 s-10 350/th350 3:73 posi 71 c-20 402/th400 towrig for racetruck. 72 4wd lifted on 35's 72 350/3 speed winter beater |
12-05-2006, 11:45 PM | #15 |
Nothings as cool as my 72
Join Date: May 2005
Location: Edmonton, AB, Kanuckastan
Posts: 181
|
Re: How To Flat Resto Rod/Pin Stripe
I've heard of using the John Deere paint before becuase it really durable. Where would a guy get some of that paint, the John Deere dealership? I was thinking of doing my truck with flat black rattle cans for a temperary thing until I could afford a nice professional paint job.
__________________
1972 C10 Longbox In the middle of body off restoration Rebuilt 355, turbo 400, 3.42 12-bolt Rolling chassis finally done and cab mounted. Now onto sanding, bondo and more sanding. |
12-05-2006, 11:56 PM | #16 |
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: How To Flat Resto Rod/Pin Stripe
I used rattle cans on mine and it was a huge waste. At least it's all one color now insteed of the fadded 2 tone yellow (front was brighter than the bed).
I will be shooting John Deere for sure. The tractor store down the street has it. Looks like it will be about $100 for all the paint and supplies. |
12-05-2006, 11:59 PM | #17 |
Account Suspended
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
|
Re: How To Flat Resto Rod/Pin Stripe
pretty much anything and everything you could ever want to know about JD Blitz Black in wikipedia format.
Worthy of Bookmarking. Equipment needed ... part numbers ... prep work required ... etc ... etc ... etc ... http://crankshaftcoalition.com/wiki/...tz_Black_paint Last edited by Shane; 12-06-2006 at 12:04 AM. |
12-06-2006, 12:20 AM | #18 |
THE VILLIAGE IDIOT
Join Date: Nov 2006
Location: Tooele, Utah
Posts: 1,405
|
Re: How To Flat Resto Rod/Pin Stripe
i like it.. i met some old school pinstripers at the spring car show this year,,,i think i could go with the blitz black,,
billy
__________________
honestly honey,,i have no idea how that truck got here. |
12-06-2006, 12:56 AM | #19 |
Registered User
Join Date: Dec 2003
Location: here
Posts: 5,789
|
Re: How To Flat Resto Rod/Pin Stripe
Mine will be on this list next spring as well. I guess we will have a bunch of flat black trucks here & thats fine by me...
|
12-06-2006, 01:20 AM | #20 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: How To Flat Resto Rod/Pin Stripe
You can do rustolium cheaper, and it is just as good a paint, if not better.
Don't bother with rattle can. It'll cost more and be WAY lower quality. |
12-06-2006, 12:28 PM | #21 |
Registered User
Join Date: Jul 2006
Location: Fresno, Ca
Posts: 154
|
Re: How To Flat Resto Rod/Pin Stripe
I'm more than likely going with a baby blu, sky blu primer colored effect. I know than mix the different colors and make them flat. I stopped at the paint store yesterday and asked them and several of the old timers had a big smile on their face. They seem to like the fact that people are making it a style. RAT Rod memories. Thanks everyone for your input. I will have some pics to post in the neer future.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|