cap swapping 2x4 to 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

munkjeep · 08-21-2002, 04:41 AM

I have a 69 GMC 1/2 ton 4x4, what all cabs will interchange? will a 2 wheel drive cab work as long as it has the shifter pan in the floor board? I have a 72 GMC ton truck, will that cab bolt up to 4x4 frame with no problems? thanx for your help, I am trying to decide what route to go, replace the cab corners and rockers or swap on a rust free cab,but junk a ton out in the process, or should I look for a cab in the junk yard.

JimKshortstep4x4 · 08-21-2002, 06:58 AM

The cab will fit , but I would put in the high hump so that you can service the transmission/transfer case if you need to.

Jim

08-21-2002, 04:41 AM	#1
munkjeep Registered User Join Date: Aug 2002 Location: Kentucky Posts: 13	cap swapping 2x4 to 4x4 I have a 69 GMC 1/2 ton 4x4, what all cabs will interchange? will a 2 wheel drive cab work as long as it has the shifter pan in the floor board? I have a 72 GMC ton truck, will that cab bolt up to 4x4 frame with no problems? thanx for your help, I am trying to decide what route to go, replace the cab corners and rockers or swap on a rust free cab,but junk a ton out in the process, or should I look for a cab in the junk yard.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-21-2002, 06:58 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	The cab will fit , but I would put in the high hump so that you can service the transmission/transfer case if you need to. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.