Truck tilt/van tilt ??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

krue · 12-22-2006, 06:20 AM

Is the turn signal switch the same between the truck tilt and van tilts? May be easier to swap ts switches than modify the van tilt I just scored.

72dually · 12-22-2006, 10:25 AM

Should be the same, other than the harness connector, and the hazard knob

If you need either, let me know. I have a few in storage. Could send you a freebie

Longhorn Man · 12-22-2006, 04:13 PM

they are the same, but the hazzard switch and plug on teh van unit may be the newer style... the replacement parts are all like the later van unit

krue · 12-22-2006, 09:18 PM

That's good. I'm not too worried about it being "correct", just want everything to work. How hard would it be to get the wires out of the flat connector and put them in the curved one?

Longhorn Man · 12-22-2006, 09:19 PM

not very hard at all, small poker... think, dental tool.
Learn on the broken unit first.

krue · 12-22-2006, 10:35 PM

Gonna give it a try anyways. Got a non tilt column I don't plan on using for a spare. Connector should be the same. Thanks Andy.

71swb4x4 · 12-22-2006, 10:43 PM

I used a toothpick to depress the connectors on mine. I had to shave the toothpick down a bit, but depress the little metal tab, and pull it out.

72dually · 12-22-2006, 10:45 PM

Yeppers, longhorns correct

krue · 12-22-2006, 10:46 PM

Thanks guys.

This place rawks.

**Palf70Step** · 12-23-2006, 09:44 AM

Krue, I have the tilt pin tool thing. Just load them up and come on down if you want. We'll rip them apart. Besides, I can watch and learn so I can do mine

krue · 12-23-2006, 07:11 PM

I may holler at you next week some time Bill.

**Palf70Step** · 12-23-2006, 09:17 PM

I'm off Tuesday and Friday, so holler on bud!! I'm changing out trailing arm and panard bushings.

krue · 12-23-2006, 09:21 PM

May come down there Friday? I wanna dig around in Berry's while I'm there.

**Palf70Step** · 12-23-2006, 09:22 PM

Works for me!!

I may even have enough money to get something at Barry's

krue · 12-23-2006, 09:25 PM

May depend on whether I can find a babysitter for the boys.

12-22-2006, 06:20 AM	#1
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Truck tilt/van tilt ??? Is the turn signal switch the same between the truck tilt and van tilts? May be easier to swap ts switches than modify the van tilt I just scored. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-22-2006, 10:25 AM	#2
72dually Senior Member Join Date: Apr 2004 Location: Northern Arizona Posts: 687	Re: Truck tilt/van tilt ??? Should be the same, other than the harness connector, and the hazard knob If you need either, let me know. I have a few in storage. Could send you a freebie __________________ 70 GMC shortbed fleetside with a 72 chevy costume Last edited by 72dually; 12-22-2006 at 10:27 AM.

12-22-2006, 04:13 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Truck tilt/van tilt ??? they are the same, but the hazzard switch and plug on teh van unit may be the newer style... the replacement parts are all like the later van unit

12-22-2006, 09:18 PM	#4
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Truck tilt/van tilt ??? That's good. I'm not too worried about it being "correct", just want everything to work. How hard would it be to get the wires out of the flat connector and put them in the curved one? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" Last edited by krue; 12-22-2006 at 09:18 PM.

12-22-2006, 09:19 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Truck tilt/van tilt ??? not very hard at all, small poker... think, dental tool. Learn on the broken unit first.

12-22-2006, 10:35 PM	#6
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Truck tilt/van tilt ??? Gonna give it a try anyways. Got a non tilt column I don't plan on using for a spare. Connector should be the same. Thanks Andy. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-22-2006, 10:43 PM	#7
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Truck tilt/van tilt ??? I used a toothpick to depress the connectors on mine. I had to shave the toothpick down a bit, but depress the little metal tab, and pull it out. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

12-22-2006, 10:45 PM	#8
72dually Senior Member Join Date: Apr 2004 Location: Northern Arizona Posts: 687	Re: Truck tilt/van tilt ??? Yeppers, longhorns correct __________________ 70 GMC shortbed fleetside with a 72 chevy costume

12-22-2006, 10:46 PM	#9
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Truck tilt/van tilt ??? Thanks guys. This place rawks. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-23-2006, 09:44 AM	#10
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,818	Re: Truck tilt/van tilt ??? Krue, I have the tilt pin tool thing. Just load them up and come on down if you want. We'll rip them apart. Besides, I can watch and learn so I can do mine __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-23-2006, 07:11 PM	#11
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Truck tilt/van tilt ??? I may holler at you next week some time Bill. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-23-2006, 09:17 PM	#12
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,818	Re: Truck tilt/van tilt ??? I'm off Tuesday and Friday, so holler on bud!! I'm changing out trailing arm and panard bushings. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-23-2006, 09:21 PM	#13
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Truck tilt/van tilt ??? May come down there Friday? I wanna dig around in Berry's while I'm there. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" Last edited by krue; 12-23-2006 at 09:23 PM.

12-23-2006, 09:22 PM	#14
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,818	Re: Truck tilt/van tilt ??? Works for me!! I may even have enough money to get something at Barry's __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 12-23-2006 at 09:23 PM.

12-23-2006, 09:25 PM	#15
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Truck tilt/van tilt ??? May depend on whether I can find a babysitter for the boys. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.