|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-28-2006, 05:43 PM
|
#1 |
|
Registered User
Join Date: Dec 2006
Location: nova scotia
Posts: 14
|
looking for info/help 68gmc
hi there
first off i want to say thank you guys so far i need to know what frames would be the closest match to my 68 gmc swb mine is pretty weak in back half also looking for small things like heater switch...wiper switch....a plug that goes in insterment cluster...a door handle for pass side etc i am in east coast of canada and not alot arround here i also need a good drivers fender and a 67-68 hood maybe too much to ship the big stuff but any help be great Last edited by laurieandmike; 12-28-2006 at 05:46 PM. |
|
|
|
12-28-2006, 07:07 PM
|
#2 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: looking for info/help 68gmc
I believe GMC used leaf springs standard and Chevy had coils.Other than that any swb frame should work.Either set-up.Go with a 71-72 for the front disc brakes if you can.As for finding a frame and the other items you can acess the classifieds on this Bulletin board if you are a subscriber.Most of what you need should be posted there.There are also some members who sell reproduction parts if you want new stuff.To subscribe go to the top of the page and look at the stickies.It's $25.00 well spent.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
|
12-28-2006, 09:22 PM
|
#3 |
|
Registered User
Join Date: Dec 2006
Location: nova scotia
Posts: 14
|
Re: looking for info/help 68gmc
also is 71 gmc fenders same has the 68 fenders?
what differences are there in the 2? thanks |
|
|
|
|
12-28-2006, 09:28 PM
|
#4 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: looking for info/help 68gmc
a GMC would have the same fenders 68 up to 72.
The frame Q... any 67 - 72 chevy or GMC swb would work as a frame donor... step side and fleetside... same frame was used. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
