Need three welded nuts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Als454 · 01-01-2007, 02:54 PM

I was hoping someone would have these:

One of the nuts for the hood hinge that are welded into the front fender.

Three of the nuts for the wheel tub that are welded into the bedsides.

Thanks, Allen

JimKshortstep4x4 · 01-01-2007, 07:47 PM

I can take a nut out of a bad fender for the hood hinge and send it to you if you can't find one locally.

We use 5/16-18 square nuts for the wheel tubs. I have some of those if your local farm supply does not have them.

Jim

01-01-2007, 02:54 PM	#1
Als454 Senior Member Join Date: Jan 2002 Location: Vienna, Ohio, USA Posts: 259	Need three welded nuts I was hoping someone would have these: One of the nuts for the hood hinge that are welded into the front fender. Three of the nuts for the wheel tub that are welded into the bedsides. Thanks, Allen __________________ 72 Chevy A/C P/B P/S Tilt 454 Engine 400 TCI Trans C30 Frame C10 Suspension Short Wheel Base (Dually)

01-01-2007, 07:47 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Need three welded nuts I can take a nut out of a bad fender for the hood hinge and send it to you if you can't find one locally. We use 5/16-18 square nuts for the wheel tubs. I have some of those if your local farm supply does not have them. Jim

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.