![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Having issues
Join Date: Jul 2005
Location: Eldorado Ca, an hour east of sacramento
Posts: 696
|
Norcal: 70 or 71 Jimmy parts rig
Allow me to begin by saying....
I am not parting this thing out! Individual parts are NOT for sale unless you buy the whole truck Sold this to a friend many moons ago, now its been dumped back into my lap. Currently located in Manteca CA. Here is a link to more pictures http://s14.photobucket.com/albums/a3...black%20jimmy/ ![]() I am not parting this thing out. Maybe if I say it enough I will make myself clear. Here is what the truck has: This thing has axles under it, unlike the first pic, this is how I found the truck. (this hardtop is GONE,and is not included, but I will give you the one that came off of my blazer, (had a hole cut in it for a vent) Front and rear axles. Front is 3.08, rear is 3.08?? shortblock, trans and transfer case. Engine turns freely, no pitting, could hone and re-ring Bare heads are 462624 1978-81 350 1.94 / 1.5 Z-28 Camaro 462624 1976-87 305 - 350 1.94 / 1.5 r 2.02 / 1.6 462624 1975-86 350 - 400 76cc chamber Decent tub, with no rot thru. It has rust, but no holes I can see. Does have issues around the windshield at the middle hardtop bolts. ![]() Good tailgate, has one dent on the side, can be straigtened. The fin is semi straight. ![]() ![]() has a rear driveshaft, but no yoke on the t-case good black visors ![]() Uncut dash, NON AC ![]() Comes with a radiator support for a 71 chevy and a few other parts I cant name at the moment Here is what the truck doesn't have. Seats Front driveshaft Good wiring under the hood. Busted fiberglass at the heater box grille front bumper (cow pusher included) seats Working brakes. When axles were taken, the system drained. Assume the MC is bad, and replace it. Exhaust system Unknowns: Title. I dont have it, but I am in contact with the last registered owner, so getting papers will be easy once there is somebody on the hook. condition of gas tank. Dunno if its full of bad gas, or empty. I will be the first person to find out after you drop the tank and tell me :P If trans and transfer work. They spin, thats all I know. this is the history of the vehicle as I know it. The truck belonged to a machinist. He lost his vision, and could not drive anymore. The truck was parked at a relatives house, and tweakers robbed the grille, aluminum heads, and go fast goodies under the hood. Truck was traded for yada yada yada a couple of times, now I have it. It is not stolen, nor is in the DMV computer, so no back fees. I am asking 600, or best reasonable offer. Last edited by masterbeavis; 08-09-2010 at 12:05 AM. |
![]() |
![]() |
![]() |
#2 |
Having issues
Join Date: Jul 2005
Location: Eldorado Ca, an hour east of sacramento
Posts: 696
|
Re: Norcal: 70 or 71 Jimmy parts rig
![]() ![]() ![]() ![]() ![]() Last edited by masterbeavis; 01-10-2007 at 01:32 AM. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2004
Location: Sacramento, CA
Posts: 1,084
|
Re: Norcal: 70 or 71 Jimmy parts rig
From the first pic, it looks like its got the front seats. I'm in need of a front drivers bucket with tracks. If you decide to part it put me in line first please.
I'm in Fair Oaks, just a stones throw from ya (if you have a good arm).
__________________
'71 ![]() "If life was fair you'd be able to afford one of each and a garage large enough to house them all." |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Dec 2006
Location: OZ
Posts: 75
|
Re: Norcal: 70 or 71 Jimmy parts rig
Man, I need some vent windows w/ good frames. If you part that thing out and the windows will fit my '69 C10, let me know.
|
![]() |
![]() |
![]() |
#5 |
Having issues
Join Date: Jul 2005
Location: Eldorado Ca, an hour east of sacramento
Posts: 696
|
Re: Norcal: 70 or 71 Jimmy parts rig
71Jimmy: The bucket seats are trashed. They were not bolted in, and are not the correct color for this rig. I assume they were for this rig, but I would have to try and install them to find out. (could be '73 or newer seats)
Bigfishbobby: I just gave a set of doors away that had good vent parts, but nasty skins. Oh well. I have a couple more sets of doors kicking around, that once I get around to it, I will be dumping/hacking up. I must warn you however, that it wont be anytime soon, and once it does happen, I suck at shipping in a timely manner. |
![]() |
![]() |
![]() |
#6 |
turbo enthusiast
Join Date: Jan 2004
Location: carmichael, ca.
Posts: 1,826
|
Re: Norcal: 70 or 71 Jimmy parts rig
trade ya a '67 burb 4x4
![]()
__________________
"But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting ![]() |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Mar 2004
Location: Sacramento, CA
Posts: 1,084
|
Re: Norcal: 70 or 71 Jimmy parts rig
[QUOTE=masterbeavis;1976825]71Jimmy: The bucket seats are trashed. They were not bolted in, and are not the correct color for this rig. I assume they were for this rig, but I would have to try and install them to find out. (could be '73 or newer seats)
Just my luck. I'm using a seat from a '74 now. Thanks for the reply.
__________________
'71 ![]() "If life was fair you'd be able to afford one of each and a garage large enough to house them all." |
![]() |
![]() |
![]() |
#8 |
Active Member
Join Date: Apr 2006
Location: Pendleton, OR
Posts: 243
|
Re: Norcal: 70 or 71 Jimmy parts rig
How much shipped to 97801 for the power brake booster support brackets?
__________________
Mike T. Oregon 70 GMC Jimmy 4x4 70 Camaro LS1 plans in the works 71 RS/SS Camaro numbers matching 86 Chevy Silverado SWB 4x4 (454 merlin heads, 3/4 running gear upgrade, Detroit lockers front and rear) |
![]() |
![]() |
![]() |
#9 |
Active Member
Join Date: Apr 2006
Location: Pendleton, OR
Posts: 243
|
Re: Norcal: 70 or 71 Jimmy parts rig
Also do you have these brackets and would you be willing to sell them?
__________________
Mike T. Oregon 70 GMC Jimmy 4x4 70 Camaro LS1 plans in the works 71 RS/SS Camaro numbers matching 86 Chevy Silverado SWB 4x4 (454 merlin heads, 3/4 running gear upgrade, Detroit lockers front and rear) |
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: Jan 2005
Location: Raleigh, NC
Posts: 894
|
Re: Norcal: 70 or 71 Jimmy parts rig
I see Blue-dial locking hubs. What condition are the dials in? And if they are in VG condition would you part them?
__________________
-Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals... |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Mar 2004
Location: Sacramento, CA
Posts: 1,084
|
Re: Norcal: 70 or 71 Jimmy parts rig
Oh sorry, I didn't think you were selling parts off it just yet. I would be interested in the drivers seat if it is rebuildable and has the tracks. It must be for a '71/'72 and not the utility buckets. The '73 up seats are slightly different and the tracks will not fit the mounting holes. I currently have a '74 seat, so I know, already went down that road.
If you could post or email some pics, so I can get a general idea of what they are like. My email address is rolandkutz@comcast.net. And include your asking price. Thanks ![]()
__________________
'71 ![]() "If life was fair you'd be able to afford one of each and a garage large enough to house them all." |
![]() |
![]() |
![]() |
#12 |
Having issues
Join Date: Jul 2005
Location: Eldorado Ca, an hour east of sacramento
Posts: 696
|
Re: Norcal: 70 or 71 Jimmy parts rig
ttt
|
![]() |
![]() |
![]() |
#13 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,477
|
Re: Norcal: 70 or 71 Jimmy parts rig
Is either one of the Fender badges in good condition, hard to tell from pic's
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
![]() |
![]() |
![]() |
#14 | |
Senior Member
Join Date: Jan 2005
Location: Raleigh, NC
Posts: 894
|
Re: Norcal: 70 or 71 Jimmy parts rig
Quote:
__________________
-Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals... |
|
![]() |
![]() |
![]() |
#15 |
Junior Member
Join Date: Jan 2007
Location: Lubbock, TX
Posts: 77
|
Re: Norcal: 70 or 71 Jimmy parts rig
Could you check the gas pedal assmebly on it for me? I need a replacement for my '69 and all 67'-70's are the same and it changed in '71. The version I need will be mounted to the firewall and the brake booster is in the way in your photo so I couldn't tell myself. I've asked a lot of people for this and haven't gotten anywhere yet but not having a gas pedal is driving me nuts.
AA
__________________
They call me, "AA." 1969 Chevy LWB-SDPC 350, TH400, old farm truck http://s123.photobucket.com/albums/o299/agronomya/ 2006 Nissan Altima-For my 2000 miles a month |
![]() |
![]() |
![]() |
#16 |
Having issues
Join Date: Jul 2005
Location: Eldorado Ca, an hour east of sacramento
Posts: 696
|
Re: Norcal: 70 or 71 Jimmy parts rig
one badge is in good shape, the other is missing the "MY" part of the foil.
The hubs don't have any channel lock marks on them. The gas pedal assembly is the cable style, 71-71 type. |
![]() |
![]() |
![]() |
#17 |
Junior Member
Join Date: Jan 2007
Location: Lubbock, TX
Posts: 77
|
Re: Norcal: 70 or 71 Jimmy parts rig
OK, thanks anyways man.
__________________
They call me, "AA." 1969 Chevy LWB-SDPC 350, TH400, old farm truck http://s123.photobucket.com/albums/o299/agronomya/ 2006 Nissan Altima-For my 2000 miles a month |
![]() |
![]() |
![]() |
#18 |
Having issues
Join Date: Jul 2005
Location: Eldorado Ca, an hour east of sacramento
Posts: 696
|
Re: Norcal: 70 or 71 Jimmy parts rig
My friend who bought this from me wants it out of his yard, I am stuck with this thing again......
__________________
Quando Omni Flunkus Moritati. The Man's Prayer: "I'm a man, but I can change, if I have to, I guess." |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Aug 2006
Location: St. Albans, Vt
Posts: 2,520
|
Re: Norcal: 70 or 71 Jimmy parts rig
How is the radiator support under the battery? Is it rusted?
|
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Jul 2005
Location: Spanaway, WA
Posts: 103
|
Re: Norcal: 70 or 71 Jimmy parts rig
How much for the back bumper brackets?
|
![]() |
![]() |
![]() |
#21 |
Registered User
![]() Join Date: Aug 2003
Location: canyon country, ca, USA
Posts: 336
|
Re: Norcal: 70 or 71 Jimmy parts rig
pm sent. interested in the whole thing but had specific questions about the frame and susp. thanks
__________________
![]() |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Jul 2005
Location: Spanaway, WA
Posts: 103
|
Re: Norcal: 70 or 71 Jimmy parts rig
Sorry thought you were parting it since everyone was asking about other parts. Guess I should have read it better. Hope you the best on its sale.
|
![]() |
![]() |
![]() |
#23 |
Having issues
Join Date: Jul 2005
Location: Eldorado Ca, an hour east of sacramento
Posts: 696
|
Re: Norcal: 70 or 71 Jimmy parts rig
no worries, three years ago I was entertaining the idea of parting it out if it did not sell as an entire unit. If it continues to sit, I will take motor/trans and linkages out and sell off carcass.
__________________
Quando Omni Flunkus Moritati. The Man's Prayer: "I'm a man, but I can change, if I have to, I guess." |
![]() |
![]() |
![]() |
#24 |
Having issues
Join Date: Jul 2005
Location: Eldorado Ca, an hour east of sacramento
Posts: 696
|
Re: Norcal: 70 or 71 Jimmy parts rig
![]() ![]() ![]() ![]()
__________________
Quando Omni Flunkus Moritati. The Man's Prayer: "I'm a man, but I can change, if I have to, I guess." |
![]() |
![]() |
![]() |
#25 |
Senior Member
![]() Join Date: May 2005
Location: hayward, ca
Posts: 268
|
Re: Norcal: 70 or 71 Jimmy parts rig
hey tony. so how much do you want for the jimmy this time around? is it a driver now? how much without engine/tranny/transfer? -jake
if you remeber, i bought those blazer bucket seats from you back in november of 2008.
__________________
67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943! |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|