67' Chevy parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1967k30 · 01-31-2007, 03:53 PM

67' 4x4 Cab and front clip. Fenders are new but drivers fender is bent up on the front fang

. Grille is nice,with chrome inserts. Cab had some work done to it. New supports and a little floor work.Good doors with chrome vent windows. Needs rockers,inner and outer,and cab corners.Good title.Fenders cost over $335. $750obo
NEW PRICE $625

4" Skyjacker front lift springs $225
Near new front driveshaft $150
4spd/205 $250

Down south truckin · 01-31-2007, 05:54 PM

I'm interested in the tow hooks pending pictures and shipping thanks Mike

Americanrider · 01-31-2007, 06:10 PM

Bump for ya, a set of 67-68 just sold on e-bay for $157 last week.

**too much stuff** · 01-31-2007, 07:02 PM

Pm sent on the hooks...

*67BABYBLUE* · 01-31-2007, 07:25 PM

Interested in pics of front clip & cab. Thanks

1967k30 · 01-31-2007, 10:56 PM

I'll get pic's this weekend.A buddy borrowed my camera for till Sat.
Thanks for the Pic AMERICANRIDER. The other set is the 69-71 hooks,I believe. Have to look again. I also have a single that is just like the pair.

4bynut · 02-01-2007, 02:29 PM

Quote:

Originally Posted by 1967k30

I'll get pic's this weekend.A buddy borrowed my camera for till Sat.
Thanks for the Pic AMERICANRIDER. The other set is the 69-71 hooks,I believe. Have to look again. I also have a single that is just like the pair.

If the single hook is 67-68? i'm interested pending pic and price. I have a 67-68 hook that needs a mate. Jason

1967k30 · 02-01-2007, 03:29 PM

OK the other pair is 69-71 and the single is too.
$200 for the pair and $100 for the single.
Last pair I could find that sold on here sold for $225.

67pacesetter · 02-01-2007, 11:59 PM

Any 67 3/4 ton hub caps??

1967k30 · 02-03-2007, 01:33 AM

Quote:

Originally Posted by 67pacesetter

Any 67 3/4 ton hub caps??

No,don't think so.

1967k30 · 02-06-2007, 03:41 PM

Here's some pic's. The 67' cab and clip is under the cage

.

*67BABYBLUE* · 02-06-2007, 03:59 PM

Hi, Where are you located in Nebraska?

1967k30 · 02-06-2007, 06:10 PM

Western NE near Alliance.

**67 cst swb** · 02-07-2007, 04:18 AM

interested in cab & clip maybe... put me inline, please...
Also you know where the Sturdevants Auto Parts Store is? If purchase happens smaller parts (not cab) could be picked up for me there.
Interested in other parts possibly also...

1967k30 · 02-07-2007, 04:16 PM

Quote:

Originally Posted by 67 cst swb

interested in cab & clip maybe... put me inline, please...
Also you know where the Sturdevants Auto Parts Store is? If purchase happens smaller parts (not cab) could be picked up for me there.
Interested in other parts possibly also...

The one in Alliance or Chadron? I'm actually south of Gordon. I'm sure you know where that is.

1967k30 · 02-09-2007, 07:01 PM

Parts still avaliable. More pic's. Have a couple Long Box's too.

**jimer1964** · 02-10-2007, 01:55 AM

hi 67k30 i am interested in pair of 69-71 style hooks pm info if you still have them thanks jim

1967k30 · 02-10-2007, 10:14 PM

Both pair of hooks are gone. Single is still avaliable.

shaneo2112RUSH · 02-10-2007, 11:35 PM

how much for the bed

**too much stuff** · 02-11-2007, 12:11 AM

PM sent on the single hook. Eric

1967k30 · 02-11-2007, 10:20 AM

Here's more pic's of the 2 beds.

shaneo2112RUSH · 02-11-2007, 11:04 PM

Quote:

Originally Posted by 1967k30

Here's more pic's of the 2 beds.

seems like the blue one is better condition then the yellow. besides the rust
hows is the condition on the blue bed?

1967k30 · 02-12-2007, 12:10 AM

the primer color one has a bit of bondo here and there but can eaislly be removed. The floor is kinda crappy. Lots of pin holes

.

**67 cst swb** · 02-12-2007, 07:33 PM

Also, interested in a decent (driver cond.) Tailgate, if willing to sell seperately...
P.S. either Chadron or Alliance work...

1967k30 · 02-21-2007, 02:40 PM

All the hooks are gone and the yellow box is gone. Rest of parts are still avaliable.

01-31-2007, 03:53 PM	#1
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	67' Chevy parts 67' 4x4 Cab and front clip. Fenders are new but drivers fender is bent up on the front fang . Grille is nice,with chrome inserts. Cab had some work done to it. New supports and a little floor work.Good doors with chrome vent windows. Needs rockers,inner and outer,and cab corners.Good title.Fenders cost over $335. $750obo NEW PRICE $625 4" Skyjacker front lift springs $225 Near new front driveshaft $150 4spd/205 $250 __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel. Last edited by 1967k30; 02-23-2007 at 01:34 PM.

01-31-2007, 05:54 PM	#2
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: 67' Chevy parts I'm interested in the tow hooks pending pictures and shipping thanks Mike

01-31-2007, 06:10 PM	#3
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: 67' Chevy parts Bump for ya, a set of 67-68 just sold on e-bay for $157 last week. Attached Images

01-31-2007, 07:02 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 67' Chevy parts Pm sent on the hooks... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-31-2007, 07:25 PM	#5
67BABYBLUE Account Suspended Join Date: Apr 2003 Location: Crown Point,IN Posts: 257	Re: 67' Chevy parts Interested in pics of front clip & cab. Thanks

01-31-2007, 10:56 PM	#6
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: 67' Chevy parts I'll get pic's this weekend.A buddy borrowed my camera for till Sat. Thanks for the Pic AMERICANRIDER. The other set is the 69-71 hooks,I believe. Have to look again. I also have a single that is just like the pair. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

02-01-2007, 03:29 PM	#8
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: 67' Chevy parts OK the other pair is 69-71 and the single is too. $200 for the pair and $100 for the single. Last pair I could find that sold on here sold for $225. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

02-01-2007, 11:59 PM	#9
67pacesetter Registered User Join Date: Dec 2006 Location: Ventura, Ca. Posts: 5	Re: 67' Chevy parts Any 67 3/4 ton hub caps??

02-06-2007, 03:41 PM	#11
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: 67' Chevy parts Here's some pic's. The 67' cab and clip is under the cage . Attached Images __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

02-06-2007, 03:59 PM	#12
67BABYBLUE Account Suspended Join Date: Apr 2003 Location: Crown Point,IN Posts: 257	Re: 67' Chevy parts Hi, Where are you located in Nebraska?

02-06-2007, 06:10 PM	#13
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: 67' Chevy parts Western NE near Alliance. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

02-07-2007, 04:18 AM	#14
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 67' Chevy parts interested in cab & clip maybe... put me inline, please... Also you know where the Sturdevants Auto Parts Store is? If purchase happens smaller parts (not cab) could be picked up for me there. Interested in other parts possibly also... __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

02-09-2007, 07:01 PM	#16
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: 67' Chevy parts Parts still avaliable. More pic's. Have a couple Long Box's too. Attached Images __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel. Last edited by 1967k30; 02-09-2007 at 11:10 PM.

02-10-2007, 01:55 AM	#17
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,683	Re: 67' Chevy parts hi 67k30 i am interested in pair of 69-71 style hooks pm info if you still have them thanks jim

02-10-2007, 10:14 PM	#18
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: 67' Chevy parts Both pair of hooks are gone. Single is still avaliable. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.



Register or Log In To remove these advertisements.

02-10-2007, 11:35 PM	#19
shaneo2112RUSH Junior Member Join Date: Jun 2006 Location: Pueblo,Colo Posts: 424	Re: 67' Chevy parts how much for the bed

02-11-2007, 12:11 AM	#20
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 67' Chevy parts PM sent on the single hook. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-11-2007, 10:20 AM	#21
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: 67' Chevy parts Here's more pic's of the 2 beds. Attached Images __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

02-12-2007, 12:10 AM	#23
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: 67' Chevy parts the primer color one has a bit of bondo here and there but can eaislly be removed. The floor is kinda crappy. Lots of pin holes . __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

02-12-2007, 07:33 PM	#24
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 67' Chevy parts Also, interested in a decent (driver cond.) Tailgate, if willing to sell seperately... P.S. either Chadron or Alliance work... __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

02-21-2007, 02:40 PM	#25
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: 67' Chevy parts All the hooks are gone and the yellow box is gone. Rest of parts are still avaliable. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.