WIW 80 3/4 ton 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

454_72_4X4 · 02-01-2007, 02:26 PM

This is my wife's truck. I think she's drove it about 1/2 a dozen times since she bought it, (Oct. of 1999), and now she's thinkin about selling it.

Factory paint and the body has never been touched, although I'm getting ready to replace the outside part of the floor pans. It had about a quarter size hole in the drivers floor pan when she bought it but sitting around is hard on things.

Specs at a glance;
400 engine
TH400 trans
NP205 transfer case
14 bolt FF rear
dana 44 front
3.73 gears (read below)
285/75/16 rubber, (approx 1/2 tread),
Aluminum 16x8? wheels, (Progressive I think)
Tilt cloumn
Newer style dash with factory tach and gauges (dash pad is cracked bad though).
New gray tweed upholstry on the factory bench seat.

I'll get some better pics today and some close up of the floor pns and any other bad areas.

Before it's actually listed for sale;
I'll be swapping in a 88-94 style blue bench seat with fold down armrest.
Swapping the current 4.09 geared Corp 10 bolt front for the above mentioned 3.73 geared Dana 44.
Adding a chrome front bumper.
Swapping to square headlights. (Factory parts)
Fixing the floor pans.
Hopefully shooting some paint on it, but I don't know if that will materialize or not.

LMK what ya think. Questions, sugestions, etc.
Thanks guys.

**ScottH** · 02-01-2007, 03:00 PM

If the headlight bezels are in good shape and you want to sell them after your swap, please keep me in mind.

Thanks.

**special-K** · 02-04-2007, 11:02 AM

Cleaned-up and painted,that thing`ll look sharp.

454_72_4X4 · 02-06-2007, 11:00 PM

Man 46 views and no value responses? Come on guys ya can't hurt my feelings, it the wife's truck! Hahaha

ScottH I'll try to remember ya on the bezels.

1969k10stepside · 02-06-2007, 11:14 PM

Id say somewhere between $1500-$2300 depending on alot of factors.Alot of old chevy 4x4s pop up and sell real quick and cheap here around deer season.
If there was a major blizzard on the way,jack up the price and sell it to someone needing a 4x4

Im sure someone wanting a turbo 400/np205 would buy it just for those,Or the axles alone

**special-K** · 02-08-2007, 08:42 AM

Thought I left a price.My shot in the dark...$1500+/-.

02-01-2007, 02:26 PM	#1
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	WIW 80 3/4 ton 4x4 This is my wife's truck. I think she's drove it about 1/2 a dozen times since she bought it, (Oct. of 1999), and now she's thinkin about selling it. Factory paint and the body has never been touched, although I'm getting ready to replace the outside part of the floor pans. It had about a quarter size hole in the drivers floor pan when she bought it but sitting around is hard on things. Specs at a glance; 400 engine TH400 trans NP205 transfer case 14 bolt FF rear dana 44 front 3.73 gears (read below) 285/75/16 rubber, (approx 1/2 tread), Aluminum 16x8? wheels, (Progressive I think) Tilt cloumn Newer style dash with factory tach and gauges (dash pad is cracked bad though). New gray tweed upholstry on the factory bench seat. I'll get some better pics today and some close up of the floor pns and any other bad areas. Before it's actually listed for sale; I'll be swapping in a 88-94 style blue bench seat with fold down armrest. Swapping the current 4.09 geared Corp 10 bolt front for the above mentioned 3.73 geared Dana 44. Adding a chrome front bumper. Swapping to square headlights. (Factory parts) Fixing the floor pans. Hopefully shooting some paint on it, but I don't know if that will materialize or not. LMK what ya think. Questions, sugestions, etc. Thanks guys. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-01-2007, 03:00 PM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WIW 80 3/4 ton 4x4 If the headlight bezels are in good shape and you want to sell them after your swap, please keep me in mind. Thanks. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-04-2007, 11:02 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: WIW 80 3/4 ton 4x4 Cleaned-up and painted,that thing`ll look sharp. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-06-2007, 11:00 PM	#4
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: WIW 80 3/4 ton 4x4 Man 46 views and no value responses? Come on guys ya can't hurt my feelings, it the wife's truck! Hahaha ScottH I'll try to remember ya on the bezels. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-06-2007, 11:14 PM	#5
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: WIW 80 3/4 ton 4x4 Id say somewhere between $1500-$2300 depending on alot of factors.Alot of old chevy 4x4s pop up and sell real quick and cheap here around deer season. If there was a major blizzard on the way,jack up the price and sell it to someone needing a 4x4 Im sure someone wanting a turbo 400/np205 would buy it just for those,Or the axles alone Last edited by 1969k10stepside; 02-06-2007 at 11:15 PM.

02-08-2007, 08:42 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: WIW 80 3/4 ton 4x4 Thought I left a price.My shot in the dark...$1500+/-. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.