how hard is it to fix this - The 1947 - Present Chevrolet & GMC Truck Message Board Network

prostreet1967 · 02-06-2007, 09:10 PM

this isn't my truck but shows the piece thats been cut off my truck by the guy who did my body work

GREASEMONKEY72 · 02-06-2007, 09:12 PM

find one and weld it back on?? or make your own?? if im guessing right it doesnt look to hard

67cst · 02-06-2007, 09:13 PM

im no expert but it shouldnt be hard to weld one back on, i bet if you found a truck at a wreckers you could cut them off and put them on your truck. before you weld them you might want to put a fender on the truck to make sure that hole will line up with your fender.

*rage'nrat638* · 02-06-2007, 09:14 PM

you can buy that part. replacement sheet metal , i just cut out the part i needed and away we went

*rage'nrat638* · 02-06-2007, 09:24 PM

here it is 19.00 brand new

http://www.gmcpauls.com/pictures/Pic...eftorright.jpg

GREASEMONKEY72 · 02-06-2007, 09:48 PM

i knew rage'nrat638 would have personaly done or atlest know about it ...haha

02-06-2007, 09:10 PM	#1
prostreet1967 Registered User Join Date: Oct 2006 Location: fort worth texas Posts: 395	how hard is it to fix this this isn't my truck but shows the piece thats been cut off my truck by the guy who did my body work Attached Images

02-06-2007, 09:12 PM	#2
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: how hard is it to fix this find one and weld it back on?? or make your own?? if im guessing right it doesnt look to hard __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

02-06-2007, 09:13 PM	#3
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,302	Re: how hard is it to fix this im no expert but it shouldnt be hard to weld one back on, i bet if you found a truck at a wreckers you could cut them off and put them on your truck. before you weld them you might want to put a fender on the truck to make sure that hole will line up with your fender. __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

02-06-2007, 09:14 PM	#4
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: how hard is it to fix this you can buy that part. replacement sheet metal , i just cut out the part i needed and away we went Last edited by rage'nrat638; 07-12-2007 at 06:57 AM.

02-06-2007, 09:24 PM	#5
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: how hard is it to fix this here it is 19.00 brand new http://www.gmcpauls.com/pictures/Pic...eftorright.jpg Last edited by rage'nrat638; 07-12-2007 at 06:57 AM.

02-06-2007, 09:48 PM	#6
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: how hard is it to fix this i knew rage'nrat638 would have personaly done or atlest know about it ...haha __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.