what did you get done this weekend?

[jamis]

I finally got back to work on my truck, haven’t touched it since July. Took a long weekend to shave and primer my doors.

[timcos]

I refurbished the whole in-cab ventilation syustem...including new heater core and hoses and outlets.

[Wootdog]

Nothing,
I am in Italy for one more week. On business. Can't wait to get back to the East Coast so I can work on my 67 and 68. Kerry

[oopstruck]

i got nothing done. damn beer. I apologize to beer I didn't mean it. please forgive me

[clay68c10]

Hmmm, beer and I put in a speed sensor for the TBI computer. Sometimes beer helps out, but only if he doesn't bring too many friends over. 2-5 seems to be a good #.

[1969k10stepside]

Dang you for doing my job j/k
I didnt even touch the truck,I did go to the junkyard though

[woodridge]

Put new battery cables on and installed the batteries in the track loader. Pulled the cab and front clip, pulled and stored the engine and trans off the 71 ton, loaded the frame on the trailer to take to the school.

[Livrat]

Went to the Corvette and High Performance swap meet on Saturday and met up with quite a few board members.. had a great time.. got out of there cheap.. bought 6 AM radios and a Strawberry shortcake..

Early Sunday morning spotted a 72 Blazer for parts on Craigslist only 4 miles away.. ended up buying the entire thing.. Had a brand new never fired Crate motor.. new T350 trans.. Factory AC.. perfect hatch, nice doors, not really rusty but pretty much dissasembled..nose was off, no seats and the PO did some damage with a fork lift setting the body back on the cleaned and painted frame.. And it was cheap!! DARN..
Stay away from Craigslist.. Stay away from Craigslist.. Stay away from Craigslist.. I have too many!, I have too many!, I have too many!

Then called on a old ad in craigslist for a new ACC high hump Blue carpet kit for $40.. Had to run and get it even though it was $20 in fuel .. Score!!

[71see10]

Had to rebuild a carb that decided to give up all at once!!! But I gotor done.

[cstm68]

finished my gas tabk relocation and worked on my center console

my build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=223308

[msgross]

Beer and I got the frame prepped for blasting, pulled the front axle but lost the fight with the rear one. Hopefully in two weeks she will be ready for paint.

Prepped the bedroom for paint since we just bought our first bedroom set (married 9 years!) and painted ceiling. woohoo

[Black 95 TSI]

Had to work Saturday, so my girl came by and i changed her oil, today i went to my brothers and helped take the front clip off the firebird, and took some more pics my truck, pulled the bigblock out of the back of the garage so we can sell it

[1BadSS]

Picked up the th400, crossmember, column, radiator, linkages, cooling lines, vacuum lines and stuff from the donor truck. Got my 69 Front clip off and out of the way, mocked up the 68 front end, going to have a bit of fitment issues. Still have to put the 7qt pan on the truck.

[BAD4X4]

Please see Project: BAD 4x4 to see what I did this weekend!!!

[Dano69c10]

For my 69; I removed more parts from the cab and stripped both doors to shells.
For my 70; Removed the driverside door handle (it had a broken button) and I installed a working driver side outside door handle,
installed driver and passenger door panels with new window handles and inside door handles, replaced the old driver side hood hinge (which had a broken rivit) with another good hood hinge I had laying around., removed the tranny and installed new front ad rear seals, installed an accelerator return spring and attachment bolt for the th350 kickdown cable on the carb throttle. Cleaned the battery acid off of the battery tray and inner fender and rad support.
Thing I wanted to do. For my 70; I wanted to removed the bucket seats and install a bench seat and remove the harness type seat belts and install stock seat belts, but Sunday night came too fast.
Dano

[69TowRig]

Installed new billet 3-groove crank pulley, made 3 trips to the auto parts store for the right belts (don't ask) and got the Power Steering coversion completed on my Blazer. OMG it is so much easier to turn the wheel now! Too bad my tires hit the pitman arm at right full-lock and now I need wheels with less backspacing! I can't believe anyone would have gotten a truck like this without power steering now!

[texascowboy593]

I cleaned the trash out of my 71 cab so my wife could ride with me to dinner! (She NEVER rides in it!) It's not much...but hey, its been a slow weekend!

[fastwillie 696969]

i went and crash a wedding party

[GREASEMONKEY72]

the only thing i did on my truck was drive it and hung a .50 cal bullit from my mirrior, put a new muffler on my buddys 73 mustang on saturday and welded it up today and also played with the timing and the idle

[OhioDan]

Installed new "Chrome" 100 amp alt. Electrical tape was to cold to work with. Got too cold to install my electric fans, so I went back into the house. Sure wish it would hurry-up and get warm outside.

[Palf70Step]

I had a long weekend, so my son and I left early Friday and drove to north Mississippi (or lower Memphis depending on who you talk to) to spend the weekend with my wife at her training location. Got to visit some relatives and met up with the minister that married us. It was a good, but truckless weekend other that sitting in the Dodge a whole lot.

Oh yeah, I realized I don't like 19 degrees as much as I use to. Dang a 40 degree drop in a 5.5 hr drive.

[panhandler62]

I put a squirrel feeder up on my tree.

[67ChevyRedneck]

Crawled under the truck, pulled the driveshaft and tranny tailshaft to add the plastic speedo gear to the tranny. I had broken the original clip when I swapped trannies and parts stores don't carry the clip, I had to go to a yard to get one Got it back together and I have a speedo that is within 3 mph at higher speeds and almost dead on below 35 mph.

I had been driving by the tach for the past 4 months

I also replaced the stereo pigtail that was shorting out (I had and extra.) and put some new sony speakers in my crappy plastic kick panels. Now I need to figure out how to mount them without drilling holes in them.

[Texasdeere]

Got the windshield, wipers and rearview mirror installed on Thursday. I removed the rear bumper from my 78 C10 and mounted it on the 72 on Friday.(Smashed the crap out of my finger ) Mounted the fuel tank and the bench seat Saturday. Repaired fuel lines under the truck on Sunday. All I need is to mount some side mirrors on it and get it inspected if I want to drive it. I need a drivers side wheel well too.

[RedZ71]

drove the wife and son to houston, to visit my mom for her birthday.

while there, i fell prey to a craigslist add (from another poster here) for a LWB bed thats apparently in pretty good condition. im going to check it out tonight to see how it is.