Electrical problem: short - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ThreeQuarter** · 08-29-2002, 10:28 PM

My friend's '68 Custom with a gauge cluster has a short somehwere in the cluster lights circuit (fuse blows for the cluster lights, but not exterior lights). He says it's been that way for a long time so I don't know if any "custom" wiring jobs caused it or not. But before I get in there and try to blindly hunt it down, I'm wondering if there is one or a few places in particular that are notorious for causing shorts in that circuit. Thnx in advance.

Longhorn Man · 08-29-2002, 10:41 PM

Pull the int panel, and look for the copper lines on the circit board, I'll bet there are a couple touching that shouldn't be.

08-29-2002, 10:28 PM	#1
ThreeQuarter Senior Member Join Date: Jun 2000 Location: Texan in Iowa Posts: 2,522	Electrical problem: short My friend's '68 Custom with a gauge cluster has a short somehwere in the cluster lights circuit (fuse blows for the cluster lights, but not exterior lights). He says it's been that way for a long time so I don't know if any "custom" wiring jobs caused it or not. But before I get in there and try to blindly hunt it down, I'm wondering if there is one or a few places in particular that are notorious for causing shorts in that circuit. Thnx in advance. __________________ Ben '68 Chevy C10 Custom LWB 327/TH400 2nd owner '16 GMC Sierra 1500 SLE Dblcab 4wd 5.3

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-29-2002, 10:41 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Pull the int panel, and look for the copper lines on the circit board, I'll bet there are a couple touching that shouldn't be.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.