The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-01-2007, 10:41 PM   #1
kelsfine69
18 Till I Die
 
kelsfine69's Avatar
 
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
Metal Glove Box

A fellow board member (Frizzle Fry) PMd me and asked if I could make a metal glove box without the radio side. More like an original replacement. So here we go...

I made a glove box out of 22g galvanized steel using some measurements from my sample dash. I had to see if it would go in in pieces. I didnt want to assemble it and then it didnt fit. Once it went in I put the ends on and then I seen if it would fit thru the hole, and it did. BUT I dont know if there is enough room to get it in on a truck. My dash is on the bench? Heater box might be in the way.
Attached Images
   
__________________
2011 GMC Acadia
1969 GMC BBC LS7
2007 GMC Crew Duramax
1987 Camaro Iroc 350 Tuned Port Injection
42000Km

1987 Chevrolet Silverado 350 TBI
1987 Chevrolet Silverado 350 TBI(yes 2)

Take me drunk, I'm too home...

Last edited by kelsfine69; 03-01-2007 at 11:05 PM.
kelsfine69 is offline   Reply With Quote
Old 03-01-2007, 10:43 PM   #2
cstm68
Registered User
 
cstm68's Avatar
 
Join Date: Jan 2007
Location: shoreline, wa
Posts: 1,565
Re: Metal Glove Box

looks good
cstm68 is offline   Reply With Quote
Old 03-01-2007, 10:44 PM   #3
kelsfine69
18 Till I Die
 
kelsfine69's Avatar
 
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
Re: Metal Glove Box

Next I pre-drilled the ends after marking the holes, Using the two factory holes on each side. and mounted it up.

OK guys Opinion time

Frizzle Fry...Is this what your talking about?
Attached Images
    
__________________
2011 GMC Acadia
1969 GMC BBC LS7
2007 GMC Crew Duramax
1987 Camaro Iroc 350 Tuned Port Injection
42000Km

1987 Chevrolet Silverado 350 TBI
1987 Chevrolet Silverado 350 TBI(yes 2)

Take me drunk, I'm too home...
kelsfine69 is offline   Reply With Quote
Old 03-01-2007, 10:47 PM   #4
Frizzle Fry
Registered User
 
Frizzle Fry's Avatar
 
Join Date: Aug 2005
Location: Hillsboro Oregon
Posts: 6,449
Re: Metal Glove Box

Yep. Perfect! I'll try it on a real truck for ya Nice work!
Frizzle Fry is offline   Reply With Quote
Old 03-01-2007, 10:59 PM   #5
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
Re: Metal Glove Box

that is much nicer than how mine came out.
I took the soggy cardboard one out, and unstapled it, traced it out on some thin sheet metal, cut it out and folded it into shape.
You'll want to toss a piece of carpet, or something to keep everything from rattling. It'll drive you insane. I used 1/16 inch rubber in mine.
Longhorn Man is offline   Reply With Quote
Old 03-01-2007, 11:01 PM   #6
kelsfine69
18 Till I Die
 
kelsfine69's Avatar
 
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
Re: Metal Glove Box

Now is this metal ok? or would the Aluminum be better? The aluminum would not hold the shine very long and it might be harder to get in? I do have some aluminized 22g at work maby I should make one of those?
__________________
2011 GMC Acadia
1969 GMC BBC LS7
2007 GMC Crew Duramax
1987 Camaro Iroc 350 Tuned Port Injection
42000Km

1987 Chevrolet Silverado 350 TBI
1987 Chevrolet Silverado 350 TBI(yes 2)

Take me drunk, I'm too home...
kelsfine69 is offline   Reply With Quote
Old 03-01-2007, 11:04 PM   #7
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
Re: Metal Glove Box

Cool idea!!

Quote:
Originally Posted by Longhorn Man View Post
that is much nicer than how mine came out.
I took the soggy cardboard one out, and unstapled it, traced it out on some thin sheet metal, cut it out and folded it into shape.
You'll want to toss a piece of carpet, or something to keep everything from rattling. It'll drive you insane. I used 1/16 inch rubber in mine.
You could use some spray on liner to coat it.

R

Last edited by Hart_Rod; 03-01-2007 at 11:04 PM.
Hart_Rod is offline   Reply With Quote
Old 03-01-2007, 11:07 PM   #8
kelsfine69
18 Till I Die
 
kelsfine69's Avatar
 
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
Re: Metal Glove Box

I bet Home Depot or whoever would have tons of ideas for a bottom liner. How about that thin black toolbox liner?
__________________
2011 GMC Acadia
1969 GMC BBC LS7
2007 GMC Crew Duramax
1987 Camaro Iroc 350 Tuned Port Injection
42000Km

1987 Chevrolet Silverado 350 TBI
1987 Chevrolet Silverado 350 TBI(yes 2)

Take me drunk, I'm too home...
kelsfine69 is offline   Reply With Quote
Old 03-01-2007, 11:23 PM   #9
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
Re: Metal Glove Box

sears would have that too.
I wouldn't do an abrasive liner, it sucks skinnin your knuckles gettin the registration and proof of ins for the cops.
Longhorn Man is offline   Reply With Quote
Old 03-01-2007, 11:29 PM   #10
Frizzle Fry
Registered User
 
Frizzle Fry's Avatar
 
Join Date: Aug 2005
Location: Hillsboro Oregon
Posts: 6,449
Re: Metal Glove Box

I was thinking about using a coating on it too. I just want something solid to mount my Omnifi (mp3 hard-drive) to. Right now it's just sitting in there.
Frizzle Fry is offline   Reply With Quote
Old 03-02-2007, 12:14 AM   #11
dan42
Registered User
 
dan42's Avatar
 
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
Re: Metal Glove Box

You know, I guess a metal glove box is a nice touch, those cardboard ones are a little cheesy, but the only reason I would go to that trouble is if I was going to put a bowling ball in there or something - don't misunderstand, it's a nice touch, but maybe a tad overkill -?
dan42 is offline   Reply With Quote
Old 03-02-2007, 12:47 AM   #12
brak
Registered User
 
brak's Avatar
 
Join Date: Apr 2006
Location: MinneSNOWta
Posts: 1,381
Re: Metal Glove Box

Quote:
Originally Posted by kelsfine69 View Post
I dont know if there is enough room to get it in on a truck. My dash is on the bench? Heater box might be in the way.
send it to me, i'd be happy to test fit it for ya.

seriously, when i read your other post earlier today, i was thinking that i should ask if you could make this very thing...

Damn I'm good
__________________
2003 GMC Sierra 1500 WT
1995 Nissan Hardbody
2016 Hyundai Veloster Turbo

DC2 (SW/AW) Clyde W. Harvey USN

"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

Last edited by brak; 03-02-2007 at 12:47 AM.
brak is offline   Reply With Quote
Old 03-02-2007, 06:35 AM   #13
weasel29gm
SLOW BUT SURE,BUT CLOSER
 
Join Date: Feb 2002
Location: eleanor wv usa
Posts: 3,096
Re: Metal Glove Box

Good idea, but when the factory ones last for 30+ yrs how long would a 10-15$ repop last?
__________________
69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......
weasel29gm is offline   Reply With Quote
Old 03-02-2007, 09:44 AM   #14
Luvlegs
Registered User
 
Luvlegs's Avatar
 
Join Date: Sep 2005
Location: Smith Mountain Lake Virginia
Posts: 1,537
Re: Metal Glove Box

very cool - I would think if you spray the outside (hidden) with say...undercoating or even wrapped it with dynamat, it would reduce any rattling to about nil and you wouldn't have to line it with anything except maybe some nice epoxy paint... or some of that "splatter of colors" type paint you see under the carpet of the old cars trunks....
__________________
"A cat will almost always blink when hit between the eyes with a ball peen hammer"
(you don't always have to state the obvious)

Wear your PPE! You can eat with false teeth but you can't see with a false eye.

1959 Studebaker Silverhawk 350/400
1972 C10 L6 3OTT
2005 F350 - Built - whew!
Luvlegs is offline   Reply With Quote
Old 03-02-2007, 11:21 AM   #15
grayw0lf
Registered User
 
Join Date: Apr 2004
Location: Clanton, AL
Posts: 1,253
Re: Metal Glove Box

It looks good, but I see one big problem. The bottle of Crown Royal is empty!
__________________
85' CUCV M1009!!! The newest addition!
6.2diesel, Th400, NP208, & only 36k miles!
70' C-10 LWB Fleetside - Looking good these days!
05' Dodge Neon
88' Winner Escape Sport 1750 - 4.3v6
94' Seadoo SP
84' Honda TRX200, bare nekkid. Just a frame & tires.

Always looking for another project or any good deal!

grayw0lf is offline   Reply With Quote
Old 03-02-2007, 03:20 PM   #16
454_72_4X4
Registered User
 
454_72_4X4's Avatar
 
Join Date: Apr 2004
Location: N.E. MO
Posts: 1,749
Re: Metal Glove Box

I like it!
Ya gonna bild more?
__________________
72 C20 4X4 454 4 speed
89 Trans Am (was) 305 TPI 700r4
93 C1500 2wd Extended cab 350 700r4
98 Sonoma (TPI outa the Trans Am)
03 Yamaha 660 Raptor
03/04 660 Raptor
07 700 Raptor
85 Honda Odyssey
454_72_4X4 is offline   Reply With Quote
Old 03-02-2007, 03:32 PM   #17
Lemield
Registered User
 
Lemield's Avatar
 
Join Date: Dec 2004
Location: Arvada Colorado
Posts: 1,321
Re: Metal Glove Box

Hey Kel.....Is the Crown Royal an integral part of the manufacturing process?



Looks awesome. As usual.
__________________
Larry

1949 Willys CJ2A, Kubota Turbo Diesel engine, Warn Overdrive, 11 inch brakes, 12volt, Warn M8000 Winch "Little Green"
1970 Rustoleum Roller Red C20 Custom Camper 454 TH400 "Big Red"
1971 K20 6.2 Turbo Diesel 4x4 4spd Ranger Overdrive "Pumpkin Wagon"
2005 VW Beetle Diesel 44+ MPG "Silver Bullet"
Lemield is offline   Reply With Quote
Old 03-02-2007, 03:41 PM   #18
WyoRoadDog
Page intentionally left blank.
 
WyoRoadDog's Avatar
 
Join Date: Jul 2006
Location: Laramie, WY
Posts: 299
Re: Metal Glove Box

If it takes a bottle of Crown to make every one, this is going to be very expensive to mass produce... and that's before considering the hangover!
__________________
There is a theory which states that if ever anyone discovers exactly what the Universe is for and why it is here, it will instantly disappear and be replaced by something even more bizarre and inexplicable.There is another theory which states that this has already happened. - Douglas Adams

'67 GMC 4x4, 305 V6! Or all the parts for anyway...
'17 Subaru Outback.
'18 Toyota Tacoma TRD Off Road.
'99 Ducati 900SS.
WyoRoadDog is offline   Reply With Quote
Old 03-02-2007, 07:21 PM   #19
kelsfine69
18 Till I Die
 
kelsfine69's Avatar
 
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
Re: Metal Glove Box

Hey you guys are funny Us Canadians and our whisky

I made a new one today out of "Galvalume". Kinda a aluminum coated steel. . I will post some pics later.
__________________
2011 GMC Acadia
1969 GMC BBC LS7
2007 GMC Crew Duramax
1987 Camaro Iroc 350 Tuned Port Injection
42000Km

1987 Chevrolet Silverado 350 TBI
1987 Chevrolet Silverado 350 TBI(yes 2)

Take me drunk, I'm too home...

Last edited by kelsfine69; 03-02-2007 at 07:21 PM.
kelsfine69 is offline   Reply With Quote
Old 03-02-2007, 07:27 PM   #20
High Speed low Drag
Registered User
 
High Speed low Drag's Avatar
 
Join Date: Sep 2006
Location: Mechanicsville, Virginia
Posts: 53
Re: Metal Glove Box

I did the same thing for a customers truck. I welded mine up and painted it black. I was able to fit it under the dash and in. When we get to the point of carpet, I plan on lining the whole glove box with carpet too.
High Speed low Drag is offline   Reply With Quote
Old 03-02-2007, 07:34 PM   #21
RICHARD MORGAN
Registered User
 
Join Date: Jan 2004
Location: HERNDON VA
Posts: 216
Re: Metal Glove Box

If you can make a metal glove box for a A/C truck I'd buy one. Please send me a message if this ever works. I'm very interested.
RICHARD MORGAN is offline   Reply With Quote
Old 03-02-2007, 08:31 PM   #22
jamie72
Senior Member
 
jamie72's Avatar
 
Join Date: Apr 2000
Location: madison indiana
Posts: 3,836
Re: Metal Glove Box

Quote:
Originally Posted by dan42 View Post
You know, I guess a metal glove box is a nice touch, those cardboard ones are a little cheesy, but the only reason I would go to that trouble is if I was going to put a bowling ball in there or something - don't misunderstand, it's a nice touch, but maybe a tad overkill -?
i wouldn`t think it is over kill if you had a nice radio, or other high value in there, just think how easy it would be to reach under the dash and break in the cardboard box and take everything inside.imo...
nice job..
__________________
jamie72
72 BB cheyenne -- Restoration getting started..

member #807



http://www.myspace.com/whitetailobsession
www.antlertalk.com
jamie72 is offline   Reply With Quote
Old 03-02-2007, 08:40 PM   #23
Rokcrln
Senior Member
 
Rokcrln's Avatar
 
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
Re: Metal Glove Box

I have thought about doing the same thing but it will be notched out for the A/C ducts so about 1/3 of the space will be lost. Nice job!

Kevin
LFD Inc.
Rokcrln is offline   Reply With Quote
Old 03-02-2007, 08:43 PM   #24
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
Re: Metal Glove Box

Now, I've only owned 3 trucks, and 2 of them were pretty well beaten by the time I got them, but my first one was pretty decent... a good 7 or 8 outta 10. However, none of them had good cardboard glove boxes... one was mising, the other two were torn up, sagging, and falling apart. I thought the cost (free scrap) was good, and the time spent on it was good. The only part I didn't like was cutting my finger real bad and bleeding.
Longhorn Man is offline   Reply With Quote
Old 03-03-2007, 02:18 PM   #25
kelsfine69
18 Till I Die
 
kelsfine69's Avatar
 
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
Re: Metal Glove Box

Heres the Galvalume one I made Installed. This material has a nicer finish to it. Im going to check out Home Depot today for some liner ideas
Attached Images
  
__________________
2011 GMC Acadia
1969 GMC BBC LS7
2007 GMC Crew Duramax
1987 Camaro Iroc 350 Tuned Port Injection
42000Km

1987 Chevrolet Silverado 350 TBI
1987 Chevrolet Silverado 350 TBI(yes 2)

Take me drunk, I'm too home...
kelsfine69 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:24 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com