Local Manitoba 67-72 truck wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rod · 08-31-2002, 12:01 AM

I need another truck. Anyone got a decent one around the Winnipeg area for sale. Email me some details. Prefer it with a valid safety inspection so I can drive it right away.

Rod · 09-01-2002, 11:50 PM

Ok no bites so how about in ND or Minnesota within a few hours of the border.

toms68cst · 09-02-2002, 05:06 PM

I know of a few Rod what kind of set up are you looking for 4X4? Fleet? Beater? Nice? ect.

Rod · 09-02-2002, 11:30 PM

I need a driver, something decent. I was through Bismark in early August but just passed through. Did not get to look at much but I did talk to a guy with a Blazer at a Gas Bar. Gave him the web site info but dont know if he made it to the boards yet.

toms68cst · 09-02-2002, 11:48 PM

This 68 is sitting near Dickinson ND. I looked at it briefly. Looked pretty solid/original. He's asking $3K US. I bet he'd deal.

toms68cst · 09-02-2002, 11:50 PM

Same seller as the 68 above. I have not seen this 72 4X4. He's asking $2.5K US.

You can see his site at www.coololdtruck.com

kirsten · 09-03-2002, 06:46 AM

Rod,
saw a truck in winnipeg for sale in teh CDN vintage and classic car trader.... mag's at my b/f's- post more when I get back over there!

dubie · 09-03-2002, 09:18 AM

If my 72 was all in 1 piece I would consider selling it to you Rod. But that's a wee bit of a drive to get from your area to here.

Just some info on it.

It's very dependable and I have used it as a daily driver for almost 5 years with no problems at all. It has a 250 inline 6 with 3 speed column shift. It doesn't have a safety on it, but I don't think it would require a lot, after the rocker panel and cab corners are replaced. If you might be interested, let me know.

dubie · 09-03-2002, 05:12 PM

TTT

Rod · 09-03-2002, 06:23 PM

I looked at something today... and it was something, it was a 72 Blazer chassis with a 68 GMC front clip and cab. Had a van tilt , factory 72 buckets, factory tach, 1970 diffs, and the blazer bed was made into a truck bed thats extra short becuase it fits on the frame. Vin number was 69 1/2 ton 4x4 GMC. It ran decent looked not too bad , he wanted 6 thousand Canadian, thats about $6000 canadian , thats 3900 US. I think thats too much for something made of that many different vehicles. Some kid will buy it come winter for sure. Still looking.

old_truck1969 · 09-06-2002, 05:18 PM

Pick up the latest issue of Canada Trader - Truck Edition. Someone left it lying around at work, and i found a couple of trucks in it.

67 chev 1/2 ton excellent cond. $6000 safetied Winnipeg

69 GMC 1/2 ton, mint $5500 Winkler, MB

hope this helps

Rod · 09-06-2002, 11:15 PM

Have plans to look at a 71 tomorrow.... we will see if I like it.

Juju · 09-07-2002, 01:38 PM

Have this 70 fpr sale runs great
It drives good tires, carb, clutch, brakes including master & slaves
recently replaced.
It passed inspection in NC before I moved to Kentucky :-)
$1275.00 (us$)

here is a link to
Truck Pictures

Rod · 09-08-2002, 12:47 AM

Sorry, wife wants an automatic.

Rod · 09-12-2002, 12:25 AM

Still looking... come on guys and gals if I dont find something that attract me soon Ill have to buy a car...

MattS · 09-12-2002, 08:52 AM

Rod - Take a look at this one. You had previously replied to me when I posted it for sale before. Under $10K(US) Unfortunately, it's a 4 speed. Cost $15K to do the frame off so I thought you might consider it worth doing a tranny swap. Located in Fargo, ND. Close enough for you to check out anyway. Contact me if you want details. Thanks.

dubie · 09-12-2002, 09:16 AM

Hey Rod

Did you check out Da-burbs Longhorn for sale on the parts board?
http://67-72chevytrucks.com/vboard/s...threadid=24009

He is in Montrose Minnesota, and this truck looks and sounds solid!!!!

Rod · 09-13-2002, 03:23 AM

MattS, it out of my price range for now. Its nice looking unit.

I looked at that longhorn post, hmm.

I looked at a 68 Chev 1/2 ton today, nah, too much to make it decent.

My brother in law like Chevy Sprints. He thinks I should get one of those in the 90's.

08-31-2002, 12:01 AM	#1
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Local Manitoba 67-72 truck wanted I need another truck. Anyone got a decent one around the Winnipeg area for sale. Email me some details. Prefer it with a valid safety inspection so I can drive it right away. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

09-01-2002, 11:50 PM	#2
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Ok no bites so how about in ND or Minnesota within a few hours of the border. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

09-02-2002, 05:06 PM	#3
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,282	I know of a few Rod what kind of set up are you looking for 4X4? Fleet? Beater? Nice? ect. __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

09-02-2002, 11:30 PM	#4
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	I need a driver, something decent. I was through Bismark in early August but just passed through. Did not get to look at much but I did talk to a guy with a Blazer at a Gas Bar. Gave him the web site info but dont know if he made it to the boards yet. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

09-02-2002, 11:48 PM	#5
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,282	This 68 is sitting near Dickinson ND. I looked at it briefly. Looked pretty solid/original. He's asking $3K US. I bet he'd deal. Attached Images __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

09-02-2002, 11:50 PM	#6
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,282	Same seller as the 68 above. I have not seen this 72 4X4. He's asking $2.5K US. You can see his site at www.coololdtruck.com Attached Images __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

09-03-2002, 06:46 AM	#7
kirsten need i say more Join Date: Jan 2000 Location: Vancouver, BC -eh.... Posts: 349	Rod, saw a truck in winnipeg for sale in teh CDN vintage and classic car trader.... mag's at my b/f's- post more when I get back over there! __________________ 1971 3/4 ton GM with a 402 Big Block Sierra Grande Camper Special big block environmentalist-HA seaangel@shaw.ca the creation of a thousand forests is in one acorn~ Ralph Waldo Emerson

09-03-2002, 09:18 AM	#8
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	If my 72 was all in 1 piece I would consider selling it to you Rod. But that's a wee bit of a drive to get from your area to here. Just some info on it. It's very dependable and I have used it as a daily driver for almost 5 years with no problems at all. It has a 250 inline 6 with 3 speed column shift. It doesn't have a safety on it, but I don't think it would require a lot, after the rocker panel and cab corners are replaced. If you might be interested, let me know. __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

09-03-2002, 05:12 PM	#9
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	TTT __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

09-03-2002, 06:23 PM	#10
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	I looked at something today... and it was something, it was a 72 Blazer chassis with a 68 GMC front clip and cab. Had a van tilt , factory 72 buckets, factory tach, 1970 diffs, and the blazer bed was made into a truck bed thats extra short becuase it fits on the frame. Vin number was 69 1/2 ton 4x4 GMC. It ran decent looked not too bad , he wanted 6 thousand Canadian, thats about $6000 canadian , thats 3900 US. I think thats too much for something made of that many different vehicles. Some kid will buy it come winter for sure. Still looking. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

09-06-2002, 05:18 PM	#11
old_truck1969 Registered User Join Date: Mar 2001 Location: Thunder Bay, Ontario, Canada Posts: 202	Pick up the latest issue of Canada Trader - Truck Edition. Someone left it lying around at work, and i found a couple of trucks in it. 67 chev 1/2 ton excellent cond. $6000 safetied Winnipeg 69 GMC 1/2 ton, mint $5500 Winkler, MB hope this helps __________________ "All Corvettes are red. The rest are mistakes." - John Heinricy

09-06-2002, 11:15 PM	#12
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Have plans to look at a 71 tomorrow.... we will see if I like it. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

09-07-2002, 01:38 PM	#13
Juju Registered User Join Date: Sep 2002 Location: Western Kentucky Posts: 5	70 C10 For sale in KY Have this 70 fpr sale runs great It drives good tires, carb, clutch, brakes including master & slaves recently replaced. It passed inspection in NC before I moved to Kentucky :-) $1275.00 (us$) here is a link to Truck Pictures

09-08-2002, 12:47 AM	#14
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Sorry, wife wants an automatic. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

09-12-2002, 12:25 AM	#15
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Still looking... come on guys and gals if I dont find something that attract me soon Ill have to buy a car... __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.



Register or Log In To remove these advertisements.

09-12-2002, 08:52 AM	#16
MattS Registered User Join Date: Jan 2002 Location: Fargo, ND Posts: 43	Rod - Take a look at this one. You had previously replied to me when I posted it for sale before. Under $10K(US) Unfortunately, it's a 4 speed. Cost $15K to do the frame off so I thought you might consider it worth doing a tranny swap. Located in Fargo, ND. Close enough for you to check out anyway. Contact me if you want details. Thanks. Attached Images

09-12-2002, 09:16 AM	#17
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	Hey Rod Did you check out Da-burbs Longhorn for sale on the parts board? http://67-72chevytrucks.com/vboard/s...threadid=24009 He is in Montrose Minnesota, and this truck looks and sounds solid!!!! __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

09-13-2002, 03:23 AM	#18
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	MattS, it out of my price range for now. Its nice looking unit. I looked at that longhorn post, hmm. I looked at a 68 Chev 1/2 ton today, nah, too much to make it decent. My brother in law like Chevy Sprints. He thinks I should get one of those in the 90's. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.